Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

Sealed Unit Parts 70 Die-Cast Aluminum Condensate Drain Pan, 12-1/4" L x 4-3/4"W x 3"D

PTC control supplies only required heat to evaporate water
• Low profile to fit in tight spaces
• Thermostat and float not required
• Self regulating
• Uniform heating
• Die-cast aluminum eliminates corrosion
• Removable cord set for easy cleaning
• Fast dissipation rate
  

RectorSeal low voltage condensate overflow shutoff switch. Installs vertically or horizontally in primary drain or can be plugged on auxilliary pans. Pre-wired with 4' 18 AWG wires.

Novent Key Style locking caps were specifically designed to protect standard Schrader service valves on A/C units to help prevent leakage or misuse of refrigerant on residential and commercial equipment.

When installed, the outer casing will rotates around the thread insert, not allowing cap to be removed, an integral torque limiter prevents over tightening
• Novent locking cap have an inner thread insert made of precision machined solid brass
• Outer shells is made of a protective corrosion resistant anodized aluminum shroud
• Integral neoprene o-ring resists oils and sealants
• Embossed ID labeling prevents refrigerants gas mixing
• Grasp cap, insert keys and turn clockwise until snug
• Place female thread of the novent cap onto male thread of the Schrader valves and tighten securely be hand using the Novent keys
• Grasp cap, rotates keys counter clockwise and remove keys
• Reverse for removal of cap
  

RectorSeal Novent Green 86661 Locking Cap For R22 Refrigerant Air Conditioners, 1/4" Thread NPT

Seals standard schrader service valves on all central air conditioners units and mini splits to help prevent refrigerant leakage
• Protects from serious injury or death resulting from the inhalation of dangerous gases
• Resists crushing and removal without key
• Corrosion resistant anodized aluminum
• Integral neoprene o-ring resists oils and sealants
• Torque limiter prevents overtightening
• (10) cap per blister pack
• Tamper resistant
  

Diversitech Refrigerant Label, 3" L, Vinyl, Acrylic Adhesive, These 3 x 4 in self-adhesive vinyl labels use a high-tack acrylic adhesive and UV cured screen printing. Color coded to conform to refrigerant labeling convention. Each label indicates the type of refrigerant (eg. R-11), the chemical name (eg. Trichloromonofluromethane) and the UN No. (eg. UN 1078). Avoid costly mistakes by properly identifying the type of refrigerant contained in recovery cylinders and air conditioning and refrigeration equipment.

Diversitech Refrigerant Label, 3" L, Vinyl, Acrylic Adhesive, These 3 x 4 in self-adhesive vinyl labels use a high-tack acrylic adhesive and UV cured screen printing. Color coded to conform to refrigerant labeling convention. Each label indicates the type of refrigerant (eg. R-11), the chemical name (eg. Trichloromonofluromethane) and the UN No. (eg. UN 1078). Avoid costly mistakes by properly identifying the type of refrigerant contained in recovery cylinders and air conditioning and refrigeration equipment.

Franklin Electric ACS-3 ACS-3 Auxiliary Condensate Overflow Safety Switch 11 Amp At 48 Vac/Vdc

Oatey 34152 Aluminum Water Heater Pan with PVC Adapter, 22 Inch ID 28 Gauge,

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry

A/C Condenser Bracket 42" (Boxed Pair) - Powder Coated

DiversiTech SpeediChannel is an innovative channel system used to cover air conditioning line sets. The two part system has a base and a cover. The base is fastened to a wall or ceiling, then a clever little plastic clip (SpeediClip) snaps into a channel already molded into the base. Then, using standard cable ties, the line set, cables, control wires, and/or condensat drain line are fastened in place. The cover then snaps simply on top of the base. The SpeediChannel system is available in three widths  3, 4, and 6. Each piece of Speedi- Channel is 6-1/2 feet long. A complete line of couplings, elbows, and tees are available for the SpeediChannel system. Manufactured from rigid PVC, the SpeediChannel system is a natural color that is a very close match to the typical mini-split condensing unit case. However, the Speedi- Channel system can be painted as desired to match any wall color. The PVC used in the SpeediChannel system is resistant to UV light, and is UL rated.

DiversiTech SpeediChannel is an innovative channel system used to cover air conditioning line sets. The two part system has a base and a cover. The base is fastened to a wall or ceiling, then a clever little plastic clip (SpeediClip) snaps into a channel already molded into the base. Then, using standard cable ties, the line set, cables, control wires, and/or condensat drain line are fastened in place. The cover then snaps simply on top of the base. The SpeediChannel system is available in three widths  3, 4, and 6. Each piece of Speedi- Channel is 6-1/2 feet long. A complete line of couplings, elbows, and tees are available for the SpeediChannel system. Manufactured from rigid PVC, the SpeediChannel system is a natural color that is a very close match to the typical mini-split condensing unit case. However, the Speedi- Channel system can be painted as desired to match any wall color. The PVC used in the SpeediChannel system is resistant to UV light, and is UL rated.

DiversiTech SpeediChannel is an innovative channel system used to cover air conditioning line sets. The two part system has a base and a cover. The base is fastened to a wall or ceiling, then a clever little plastic clip (SpeediClip) snaps into a channel already molded into the base. Then, using standard cable ties, the line set, cables, control wires, and/or condensat drain line are fastened in place. The cover then snaps simply on top of the base. The SpeediChannel system is available in three widths  3, 4, and 6. Each piece of Speedi- Channel is 6-1/2 feet long. A complete line of couplings, elbows, and tees are available for the SpeediChannel system. Manufactured from rigid PVC, the SpeediChannel system is a natural color that is a very close match to the typical mini-split condensing unit case. However, the Speedi- Channel system can be painted as desired to match any wall color. The PVC used in the SpeediChannel system is resistant to UV light, and is UL rated.