Home  > WALES DARBY INC(x)
View:
Taco A3023522 Polyamide 4-Wire Thermal Actuator, 24 VAC Plus 20% Minus 4-wire thermal actuators mount directly onto TruFLOW Classic, TruFLOW Jr. valved, stainless-steel and EP heating manifolds. The actuators provide individual loop flow control on multi-zoned manifolds and feature an end switch for activation of a relay (pump), heat plant or other auxiliary devices. All adapter rings to mount to Uponor manifolds are included in the package.
Item#:
A3023522
Manufacturer Item:
A3023522
Manufacturer:
WALES DARBY INC
Isoclima line sets out performs every other line set by keeping quality their number one priority. Superior copper, free of imperfections that cause leaks and kinks is produced from their proprietary foundry. Isoclima makes every job look cleaner and more professional and is available from select wholesalers across the country.
  • Scratch or tear resistant
  • Handy 1 feet markings
  • Compact package footprint
  • Tough, white sheathing is highly resistant to tearing but trims clean and holds up under harsh UV ray exposure and the heat from brazing
  • Single pre-insulated pipe coils
  • 10 years limited warranty
Item#:
ISO14-12-164
Manufacturer Item:
ISO14-12-164
Manufacturer:
WALES DARBY INC
Isoclima line sets out performs every other line set by keeping quality their number one priority. Superior copper, free of imperfections that cause leaks and kinks is produced from their proprietary foundry. Isoclima makes every job look cleaner and more professional and is available from select wholesalers across the country.
  • Scratch or tear resistant
  • Handy 1 feet markings
  • Compact package footprint
  • Tough, white sheathing is highly resistant to tearing but trims clean and holds up under harsh UV ray exposure and the heat from brazing
  • Single pre-insulated pipe coils
  • 10 years limited warranty
Item#:
ISO12-12-164
Manufacturer Item:
ISO12-12-164
Manufacturer:
WALES DARBY INC
Isoclima line sets out performs every other line set by keeping quality their number one priority. Superior copper, free of imperfections that cause leaks and kinks is produced from their proprietary foundry. Isoclima makes every job look cleaner and more professional and is available from select wholesalers across the country.
  • Scratch or tear resistant
  • Handy 1 feet markings
  • Compact package footprint
  • Tough, white sheathing is highly resistant to tearing but trims clean and holds up under harsh UV ray exposure and the heat from brazing
  • Single pre-insulated pipe coils
  • 10 years limited warranty
Item#:
ISO38-12-164
Manufacturer Item:
ISO38-12-164
Manufacturer:
WALES DARBY INC
The Taco Zone Sentry Zone Valve enhances the overall performance of any zone valve system. The unique patented technology in the Zone Sentry utilizes a microcircuit based logic to control a gear driven electronic actuator which drives a ball valve based body design. All this adds up to a zone valve that leads the industry in energy efficiency, flow capacity (Cv), shutoff pressure rating, ease of installation, diagnostic capability and the number of valves that can be use on a standard 40VA transformer.
  • The ball valve installs in any orientation
  • Multi-function LED
  • Quick connect wiring
  • Manual override
  • (90 deg turn) approximately 5 sec ball rotation speed
  • 1 amp at 24 VAC end switch rating
  • 0.5 amp heat anticipator setting
  • Brass press ring and brass (chrome-plated)
  • High performance engineered polymer body, high performance internally lubricated engineered polymer gears actuator
  • 2-pin screw connectors for power and end switch
Item#:
Z075F2-1
Manufacturer Item:
Z075F2-1
Manufacturer:
WALES DARBY INC
Taco 409-3 Commercially Rated Air Vent, 3/4 Inch, MNPT, 150 psi, 35 - 240 deg F, Brass
  • The conical shape of the vent significantly increases the clearance between the water level and internal mechanisms
  • Reducing the potential that dirt floating on the top of the water could foul the venting operation
  • High capacity design
  • It features a convenient outlet connection for a 3/4" inside diameter flex tube waste connection
  • Non adjustable, straight mount
Item#:
409-3
Manufacturer Item:
409-3
Manufacturer:
WALES DARBY INC
The VT2218 comes with 2 temperature sensors to provide Delta-T readings to the pump's brain. So it's ready to slash fuel bills right out of the box. The VT2218 is whisper quiet and has a big, bright LCD screen that's easy on the eyes. Simple push-button navigation lets you set the pump to any one of five modes quickly and easily. But what you can't see is just as important: our innovative Bio Barrier protects the rotor and bearings from system contaminants. Delta-T is the comfort standard for American homes. With our infinitely variable speed ECM motor, the VT2218 uses up to 85% less electricity and maximizes total system and boiler performance. The bottom line more comfort for a lot less money. The VT2218 can slash fuel bills by hundreds of dollars. Its companion, the Zone Sentry zone valve, draws up to 93% less energy, uses fewer components and can handle up to 12 valves per standard 40 VA transformer. When it comes to zone valves, the Zone Sentry is the smartest decision you can make.
  • High-efficiency ECM motor uses up to 85% less electricity
  • Delta T operation maximizes system efficiency and comfort
  • Can lower fuel bills up to 5%
  • LCD displays mode, setting, watts, supply & return temperatures
  • Easy to program and install
  • Operates in 5 different modes
  • Use with a Taco ZVC zone valve control or SR switching relay for on/off operation
  • Sensors and integral flow check (IFC) included
  • Bio Barrier filter protects rotor/bearings from black iron oxide
  • Whisper quiet operations
  • Aluminum/composite stator housing, stainless steel cartridge, ceramic shaft and bearings, EPDM o-ring and gaskets
Item#:
VT2218
Manufacturer Item:
VT2218
Manufacturer:
WALES DARBY INC
Taco in-line circulators are designed to efficiently circulate heated or chilled water in residential or light commercial hydronic systems. These circulators may also be used for zoning large installations and are available in bronze or stainless steel construction for domestic hot water applications. In-line circulators demonstrate proven performance, dependability, quiet operation and long lasting performance.
  • Resilient mounted, split phase motor with built-in overload protector
  • Equipped with sleeve bearings for quiet operation
  • One piece non-ferrous impeller
  • Stainless steel shaft
  • Rugged bronze sleeve bearing
  • Two piece carbon/ceramic seal assembly
  • Durable one-piece spring coupling
  • Every circulator is operated before shipment
  • No special tools required
  • Nationwide parts availability
Item#:
112-14
Manufacturer Item:
112-14
Manufacturer:
WALES DARBY INC
Item#:
133-119
Manufacturer Item:
133-119
Manufacturer:
WALES DARBY INC
Taco 2400 series high capacity circulators are specifically designed for quiet, efficient, dependable operation in a wide range of medium to high flow/head hydronic heating, chilled water cooling and hot water recirculation applications. The space saving, close-coupled, maintenance free motor with permanently lubricated, sealed-for-life bearings, Noryl impeller and durable, carbon/silicon-carbide mechanical seal provide unmatched reliability. Available in cast iron or stainless steel construction.
  • Compact, space saving design
  • Powerful close-coupled, maintenance free motor
  • Superior efficiency, high starting torque
  • Permanently lubricated, sealed for life bearings
  • Rugged 1/2" stainless steel shaft
  • Carbon/silicon-carbide mechanical seal for long life
  • Universal flange to flange dimensions
  • Anti-condensate design for chilled water
  • Dual electrical knockouts
  • Dual pressure taps, suction/discharge
Item#:
2400-40
Manufacturer Item:
2400-40
Manufacturer:
WALES DARBY INC
Taco 2400 series high capacity circulators are specifically designed for quiet, efficient, dependable operation in a wide range of medium to high flow/head hydronic heating, chilled water cooling and hot water recirculation applications. The space saving, close-coupled, maintenance free motor with permanently lubricated, sealed-for-life bearings, Noryl impeller and durable, carbon/silicon-carbide mechanical seal provide unmatched reliability. Available in cast iron or stainless steel construction.
  • Compact, space saving design
  • Powerful close-coupled, maintenance free motor
  • Superior efficiency, high starting torque
  • Permanently lubricated, sealed for life bearings
  • Rugged 1/2" stainless steel shaft
  • Carbon/silicon-carbide mechanical seal for long life
  • Universal flange to flange dimensions
  • Anti-condensate design for chilled water
  • Dual electrical knockouts
  • Dual pressure taps, suction/discharge
Item#:
2400-50/2
Manufacturer Item:
2400-50/2
Manufacturer:
WALES DARBY INC
The Taco 007 cartridge circulator is the most popular hydronic circulator sold today. With its field serviceable cartridge design, the compact 007 provides quiet, efficient operation and unmatched reliability. The self-lubricating, maintenance free design and flow characteristics make it the ideal hydronic circulator for a wide range of applications.
  • Quiet, efficient operation
  • Unique replaceable cartridge design
  • Universal flange to flange dimensions
  • Standard high capacity output
  • Unmatched reliability, maintenance free
  • No mechanical seal
  • Unmatched reliability, maintenance free
Item#:
50782
Manufacturer Item:
007-HF5
Manufacturer:
WALES DARBY INC
View: