Home  > PARKER HANNIFIN(AFTERMARKET)(x)
|◀ 1 - 12 of 187 ▶|
View:
The Parker Virginia line of chemicals offers exceptional cleaning effectiveness for condenser coils, evaporator coils, ice machines, and commercial dishwashers. Accumulated dirt, dust and grease insulate against heat transfer which can reduce system BTU capacity by as much as 30%. This results in increased compressor amperage draw and longer unit run times which causes increased utility costs and decreased equipment service life. Keeping heat transfer coils clean ensures maximum performance and efficiency. Suniso premium naphthenic based refrigeration and A/C oils have been the AC/R industry standard for over 40 years because of the long trouble-free service records of systems that have used Suniso refrigeration oils.
  • Low floc point, low wax content minimizes the potential for wax separation when used in low temperature applications
  • Low pour point prevents oil from congealing in refrigerant lines
  • Freedom from moisture and other contaminants prevents premature wear and the plugging of lines and oil ports
  • Controlled viscosity, maintains high film strength even when diluted with refrigerant, yet remains fluid under extreme low temperature operating conditions
  • High dielectric strength allows the oil/refrigerant mixture to serve as an insulator between the motor windings and the body in a compressor
  • High chemical stability minimizes the reaction with refrigerants and other materials that are a part of the system
  • High performance desiccant package provides high water and acid capacity
  • Complete contaminant control to protect and extend system life and ensure system reliability
  • Porous molded core provides excellent filtration of solid debris for TEV and compressor protection
  • Less than 0.01 mm Hg vapor pressure
  • Solubility: insoluble in water
  • Partition coefficient: n-octanol/water or Coefficient of water/oil distribution: greater than 20
Sid Harvey Item #:F49: Replaces Part #:'s : 4303-07
Item#:
F49
Manufacturer Item:
475328
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Type LAC head pressure control valves have a brass body with copper connections. These valves are nonadjustable. They perform the function of limiting flow of refrigerant from the condenser and at the same time regulate the flow of hot gas around the condenser to the receiver during low ambient conditions, so as to keep the refrigerant in the liquid line at proper pressure. Each valve is factory tested to ensure positive leak-free performance.
  • Metal to metal seating material
  • Knife edge joint
  • Less strainer
Item#:
LAC-4-180-3/8OD
Manufacturer Item:
903024P
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Crankcase Pressure Regulating Valves are designed to prevent overloading of the compressor motor by limiting the crankcase pressure to a predetermined maximum value during and after a defrost cycle or a normal shutdown period. These valves automatically throttle the vapour flow from the evaporator until the compressor can handle the load. Parker Sporlan manufactures five adjustable direct acting models CRO-4 all models respond only to their outlet pressure and modulate to prevent the suction pressure at the compressor from rising above the valve setting. Since these valves are adjustable, the setting may be altered to suit the specific system requirements.
  • Highest quality component
  • Durable and reliable
  • Precision engineering
  • Adjustable setting
  • Practical and economical
  • Easy to install
  • Tested for accuracy
  • Hermetic construction type of joints
  • Brass bellows element type
  • Close on rise of outlet pressure
  • Brass bellows
  • 40 mesh Insertable strainer
  • 3/4" port
  • Access valve on Inlet connection
Item#:
CROT-6-0/60-5/8OD
Manufacturer Item:
900556P
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Sporlan 180401 Power Element for R-22, R-407C Refrigerant
  • Element kit number KT-46-VW
Item#:
KT-46-VW
Manufacturer Item:
KT-43-VC
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Sporlan MKC-1-120/240 Molded Solenoid Coil Kit, 120/240 VAC , 50/60 Hz
  • Supplied with junction box
  • Red/yellow/black/blue lead wire
Item#:
PKC-1-120/240
Manufacturer Item:
MKC-1-120/240
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker has engineered a full line of pressure regulating valves to control evaporator pressure, crankcase pressure, head pressure, and discharge bypass. A consistent evaporating temperature is maintained at the valve setting as evaporator loads decrease. When the evaporator load increases, the ORIT valve opens on a rise of inlet pressure above its setting.
  • Highest quality component
  • Durable and reliable
  • Precision engineering
  • Adjustable setting
  • Practical and economical
  • Easy to install
  • Tested for accuracy
  • Direct acting (most economical)
  • Hermetic construction (no gaskets or seals)
  • Corrosion resistant construction
  • Inlet pressure tap (standard)
  • Inlet strainer (standard on ODF models)
  • Open on rise valve
  • 4 mesh Insertable strainer
Item#:
ORIT-6-30/100-7/8OD
Manufacturer Item:
901180P
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
The Parker Virginia line of chemicals offers exceptional cleaning effectiveness for condenser coils, evaporator coils, ice machines, and commercial dishwashers. Accumulated dirt, dust and grease insulate against heat transfer which can reduce system BTU capacity by as much as 30%. This results in increased compressor amperage draw and longer unit run times which causes increased utility costs and decreased equipment service life. Keeping heat transfer coils clean ensures maximum performance and efficiency. Suniso premium naphthenic based refrigeration and A/C oils have been the AC/R industry standard for over 40 years because of the long trouble-free service records of systems that have used Suniso refrigeration oils.
  • Low floc point, low wax content minimizes the potential for wax separation when used in low temperature applications
  • Low pour point prevents oil from congealing in refrigerant lines
  • Freedom from moisture and other contaminants prevents premature wear and the plugging of lines and oil ports
  • Controlled viscosity, maintains high film strength even when diluted with refrigerant, yet remains fluid under extreme low temperature operating conditions
  • High dielectric strength allows the oil/refrigerant mixture to serve as an insulator between the motor windings and the body in a compressor
  • High chemical stability minimizes the reaction with refrigerants and other materials that are a part of the system
  • High performance desiccant package provides high water and acid capacity
  • Complete contaminant control to protect and extend system life and ensure system reliability
  • Porous molded core provides excellent filtration of solid debris for TEV and compressor protection
  • Less than 0.01 mm Hg vapor pressure
  • Solubility: insoluble in water
  • Partition coefficient: n-octanol/water or Coefficient of water/oil distribution: greater than 20
Sid Harvey Item #:F49-5: Replaces Part #:'s : 4304-07
Item#:
F49-5
Manufacturer Item:
475330
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Type LAC head pressure control valves have a brass body with copper connections. These valves are nonadjustable. They perform the function of limiting flow of refrigerant from the condenser and at the same time regulate the flow of hot gas around the condenser to the receiver during low ambient conditions, so as to keep the refrigerant in the liquid line at proper pressure. Each valve is factory tested to ensure positive leak-free performance.
  • Metal to metal seating material
  • Knife edge joint
  • Less strainer
Item#:
LAC-4-180-1/2OD
Manufacturer Item:
903038P
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Type LAC head pressure control valves have a brass body with copper connections. These valves are nonadjustable. They perform the function of limiting flow of refrigerant from the condenser and at the same time regulate the flow of hot gas around the condenser to the receiver during low ambient conditions, so as to keep the refrigerant in the liquid line at proper pressure. Each valve is factory tested to ensure positive leak-free performance.
  • Metal to metal seating material
  • Knife edge joint
  • Less strainer
Item#:
LAC-5-180-5/8OD
Manufacturer Item:
903029P
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker PSG-3S Moisture Indicator Sight Glass, 3/8 x 3/8 Inch Sweat, Forged
Item#:
PSG-3S
Manufacturer Item:
SA-13S
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Nu-Calgon 4217-W3 Self-Adhesive Insulation Tape, 3 feet Roll L x 2 Inch W x 1/8 Inch T, Cork, Black
Sid Harvey Item #:J6-3: Replaces Part #:'s : G21-515
Item#:
J6-3
Manufacturer Item:
4217-W3
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Sporlan MKC-1-120 Molded Solenoid Coil Kit, 120 VAC , 50/60 Hz
  • Supplied with junction box
  • Blue lead wire
Item#:
PKC-1-120
Manufacturer Item:
MKC-1-120
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
|◀ 1 - 12 of 187 ▶|
View: