Tjernlund HSJ Aluminized Steel Housing and Blower Wheel Side Wall Power Venter, 4 Inch, 115 VAC , 3000 RPM , 125000 BTU/hr

• UC1 universal control and a diaphragm fan proving switch safety interlock which will shut down the heating equipment if a venting malfunction occurs
• Built-in adjustable damper also allows regulation for maximum combustion efficiency
• Interlocks with any 24/120 VAC burner circuit
• UC1 universal control features adjustable pre/post-purge, LED status indicators, and fault code memory
• Thermal protection, sintered iron sleeve type bearing
• UC1 interlock control, fan proving switch, adjustable damper, vibration isolators included

Sid Harvey Item #:HS-J: Replaces Part #:'s : X89-438,

Tjernlund HS-J

,

HS-J

Tjernlund HS2 Aluminized Steel Housing and Blower Wheel Side Wall Power Venter, 6", 115 VAC , 3300 RPM , 600000 BTU

• UC1 universal control and a diaphragm fan proving switch safety interlock which will shut down the heating equipment if a venting malfunction occurs
• Built-in adjustable damper also allows regulation for maximum combustion efficiency
• Interlocks with any 24/120 VAC burner circuit
• UC1 universal control features adjustable pre/post-purge, LED status indicators, and fault code memory
• Thermal protection, sintered iron sleeve type bearing
• UC1 interlock control, fan proving switch, adjustable damper, vibration isolators included

Sid Harvey Item #:HS2: Replaces Part #:'s : 30933,

Tjernlund HS2

,

HS2

Tjernlund HS1 Steel Side Wall Power Venter with UC1 Control, 115 VAC at 60 Used for side wall venting residential/light commercial natural gas, LP or oil fired equipment including: Furnaces, boilers, water heaters and unit heaters. All models feature the new UC1 universal control and a diaphragm fan proving switch safety interlock which will shut down the heating equipment if a venting malfunction occurs. Built-in adjustable damper also allows regulation for maximum combustion efficiency. UC1 universal control features include, adjustable pre and post-purge settings, LED status/diagnostic indicators, fan prover switch monitoring. Interlocks with any 24 - 120 VAC burner control circuit and also includes dry contact actuation option. Easily interlock multiple appliances with our MAC-series multiple appliance controls.Sid Harvey Item #:HS1: Replaces Part #:'s : 21767,

Tjernlund HS1

,

HS1

Tjernlund The SideShot models SS1 and SS2 SideWall Vent Systems include the UC1 Universal Control for increased safety, performance and reliability. Designed for oil fired heating equipment or a deluxe gas vent system. Patented vent termination propels flue gases at high velocities away from the building exterior, a necessity when venting oil fired equipment. Both models can be installed with zero clearance to combustible materials and have stainless steel construction in critical areas. Factory wired safety and operating controls allow simple interlock with any burner. The new model SS2 features a self-cleaning stainless steel, backward inclined impeller and sealed ball bearing motor for virtually maintenance free installations. Ultra-fine draft adjustment and slide-out access to all internal components. Easy multiple appliance interlocks with our MAC Series multiple appliance controls.

• Use to side wall vent non-condensing oil fired boilers, water heaters and furnaces that otherwise would require a conventional roof top terminated chimney
• Built-in interlock control with redundant high limit safety switch interfaces easily with thermostat, aquastat or primary controls
• Adjustable pre and post purge timing and easy fault code retrieval
• Stainless steel construction in all critical components including outdoor terminus
• Patented design jets flue gases away from the outside wall to eliminate potential staining of siding
• Slide out service drawer and material handling stainless steel impeller

Sid Harvey Item #:SS2: Replaces Part #:'s : 6H167A,

Tjernlund SS2

,

SS2

Tjernlund The SideShot models SS1 and SS2 SideWall Vent Systems include the UC1 Universal Control for increased safety, performance and reliability. Designed for oil fired heating equipment or a deluxe gas vent system. Patented vent termination propels flue gases at high velocities away from the building exterior, a necessity when venting oil fired equipment. Both models can be installed with zero clearance to combustible materials and have stainless steel construction in critical areas. Factory wired safety and operating controls allow simple interlock with any burner. The new model SS2 features a self-cleaning stainless steel, backward inclined impeller and sealed ball bearing motor for virtually maintenance free installations. Ultra-fine draft adjustment and slide-out access to all internal components. Easy multiple appliance interlocks with our MAC Series multiple appliance controls.

• Use to side wall vent non-condensing oil fired boilers, water heaters and furnaces that otherwise would require a conventional roof top terminated chimney
• Built-in interlock control with redundant high limit safety switch interfaces easily with thermostat, aquastat or primary controls
• Adjustable pre and post purge timing and easy fault code retrieval
• Stainless steel construction in all critical components including outdoor terminus
• Patented design jets flue gases away from the outside wall to eliminate potential staining of siding

Sid Harvey Item #:106-10: Replaces Part #:'s : 6H167,

Tjernlund 106-10

,

106-10

Tjernlund 950-0017 Stainless Steel Impeller Wheel Kit

,

tjernlund 950-0017

,

950-0017

Tjernlund MAC1E is used in conjunction with the UC1 universal control to interlock one additional 24 VAC, 115 VAC or millivolt controlled appliance. Millivolt appliances require a WHKE kit. Powered by and communicates with the UC1 through a factory wired whip. It activates the inducer/blower through its connections to the UC1, and in turn relies on the UC1 fan prover safety circuit (P1 and P2) to allow its interlocked appliance to operate. Any pre/post-purge settings on the UC1 will be defaulted to the MAC1E.

• The MAC1E puts an end to difficult and costly job site wiring nightmares
• Circuit board housed in oversized 18 ga electrical box with multiple knock outs for easy wiring connections

Sid Harvey Item #:MAC1E: Replaces Part #:'s : 21778,

MAC1E

,

tjernlund mac1e

Tjernlund 950-1020 Replacement Motor Kit

Sid Harvey Item #:950-1020: Replaces Part #:'s : 17H2731,

Tjernlund Motor 950-1020

Tjernlund 950-8804 Circuit Board for Draft Inducers, Power Venters and UC1, SS-1 SS- New HS Series Models

Sid Harvey Item #:950-8804: Replaces Part #:'s : 8G9582A,

tjernlund 950-8804

,

950-8804

Tjernlund Specially designed to terminate Tjernlund Side Wall Vent Systems. They are also an approved method of terminating many horizontally vented appliances. Vent hoods feature heavy duty, corrosion resistant aluminum construction. Models VH1-3, 4 and 6 also have an additional heat shield for built in clearances from combustibles. Building exteriors are kept clean while the aesthetics of the structure remain undisturbed. All mounting hardware is included.

• 8" square rough-in
• Mounting hardware

Sid Harvey Item #:106-20: Replaces Part #:'s : x89-442,

Tjernlund 106-20

,

106-20

Tjernlund Specially designed to terminate Tjernlund Side Wall Vent Systems. They are also an approved method of terminating many horizontally vented appliances. Vent hoods feature heavy duty, corrosion resistant aluminum construction. Models VH1-3, 4 and 6 also have an additional heat shield for built in clearances from combustibles. Building exteriors are kept clean while the aesthetics of the structure remain undisturbed. All mounting hardware is included.

• 9" rough-in diameter
• Mounting hardware

Sid Harvey Item #:106-21: Replaces Part #:'s : x81-965,

Tjernlund 106-21

,

106-21