Home  > SHERWOOD VALVE LLC(x)
View:
Sherwood Valve Ball Valve Y579-4313
  • 1-3/8" OD,

    Y579-4313

    ,

    Y579-4313

Item#:
Y579-4313
Manufacturer Item:
592W-13ST
Manufacturer:
SHERWOOD VALVE LLC
A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon® ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.
  • Includes access fitting on tube extension
  • Polished brass or carbon steel ball resists corrosion
  • Seal cap design allows operation without removal of cap
  • PTFE ball seals and gaskets ensure tight leak-free valve
  • Full-size ports for unrestricted flow
  • Forged seal cap
  • Seal cap design permits valve operation without removal of seal cap
  • Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507
Sid Harvey Item #:586WAS-12ST:,

587WA-12ST

,

587WA-12ST

Item#:
587WA-12ST
Manufacturer Item:
587WA-12ST
Manufacturer:
SHERWOOD VALVE LLC
A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon® ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.
  • Polished brass or carbon steel ball resists corrosion
  • Seal cap design allows operation without removal of cap
  • PTFE ball seals and gaskets ensure tight leak-free valve
  • These ball valves employ the latest robotic welding technology
  • Full-size ports for unrestricted flow
  • Forged seal cap
  • Seal cap design permits valve operation without removal of seal cap
  • Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507
Sid Harvey Item #:586W-6ST: Replaces Part #:'s : 900203 | ABV3 | ABV3A,

586W-6ST

,

586W-6ST

Item#:
586W-6ST
Manufacturer Item:
586WA-6ST
Manufacturer:
SHERWOOD VALVE LLC
Superior offers the most complete range of refrigeration relief valves in the industry with both low and high pressure ratings. All valves have been designed, constructed and rated in accordance with ANSI/ASHRAE 15 - 1994 standard safety code for mechanical refrigeration. Each valve is stamped UV/N. to indicate National Board certifications as to capacities. These pressure-relief valves are all Teflon seated, permitting their use in applications of either high or low temperatures where the conventional rubber seated valves are often completely unsatisfactory.
  • Stainless steel spring material construction
  • Initial leak set pressure plus/minus 3%
  • Reset at 80% of set pressure
  • 3/8" NPT x SAE 425 PSI,

    D04693762

    ,

    D04693762

Item#:
D04693762
Manufacturer Item:
A 15502-425
Manufacturer:
SHERWOOD VALVE LLC
Packed line valves are designed for a multitude of uses in refrigeration systems. When installed properly, these handy, forged brass, packed angle valves provide easy accessibility, and serviceability to the refrigeration system. All packed angle valves are provided with a brass seal cap.
  • Seal cap construction is brass with copper gasket or nylon gasket
  • Steel stem with copper nickel plating
  • 1/4" NPT x 3/8" Flare
Item#:
D04226498
Manufacturer Item:
A 11030
Manufacturer:
SHERWOOD VALVE LLC
Packed line valves are designed for a multitude of uses in refrigeration systems. When installed properly, these handy, forged brass, packed angle valves provide easy accessibility, and serviceability to the refrigeration system. All packed angle valves are provided with a brass seal cap.
  • Seal cap construction is brass with copper gasket or nylon gasket
  • Steel stem with copper nickel plating
  • 3/8" NPT x 3/8" Flare
Item#:
D04226506
Manufacturer Item:
600A-6C
Manufacturer:
SHERWOOD VALVE LLC
View: