RectorSeal® AG-GF Black Polymer Secondary Drain Pan, 64" L x 34" W x 7-1/2" H

RectorSeal AG-36X64

These"Level-Temp" controls have been designed to operate with a White-Rodgers low-voltage electric heat thermostat to provide a system for controlling electric warm air heaters and electric radiant heating devices such as duct heaters, wall heaters, baseboards, floor and ceiling cable heaters.

• Level-temp allows low voltage 2-wire thermostat to control line voltage loads such as baseboard heaters
• Ideal for all types of electrical heat
• Non-critical mounting angle
• Universal break-off mounting tabs
• Dual level-temp capable of controlling two separate loads
• Includes universal break off tabs and 18" leads

Sid Harvey Item #:24A01G-3: Replaces Part #:'s : L36-166,

RectorSeal AG-GF34X79

,

AG-GF34X79

RectorSeal® 96143 Polystyrene Electronic Water Sensor and Drain Port with Grommets, 5 amp, 24 VAC

• Redesigned drain adapter
• Water detection LED light
• 6 feet of standard control wire
• 1/4" trigger depth
• 24 volt load capacity

Sid Harvey Item #:AG-4200: Replaces Part #:'s : B16-961,

AG-4200

,

AG-4200

RectorSeal® Aquaguard AG-1100+ Magnetic Float Switch, for Use With Metal Pan

• Easy, drill-free installation
• Pull up test knob
• Protective cover
• Can be mounted to drain pan in 10 seconds or less,
  
  

  AG-1100

  ,
  

  AG-1100

RectorSeal® AguaGuard AG-1200+ offers all of the same industry leading features of the AquaGuard 1100+ magnetic float switch plus an innovatively designed two-piece clamp, which allows it to be mounted to either the side of a metal secondary drain pan or the rolled edge of a plastic secondary drain pan. The AquaGuard AG-1200+ has a trigger sensitivity of less than 1/2 in of condensate overflow.

• High capacity 5 amp, 24 VAC sensor
• Easy, drill-free installation
• Lift float pin test knob
• Protective housing keeps out insulation, pests and debris
• Normally open 3rd wire for optional external alarm, digital controller or energy management systems
• The AG-1100+ is incredibly easy to install, it can be mounted to the drain pan in 10 sec or less, installation does not require any pre-drilling for screws
• The AG-1100+ incorporates a Protective cover to keep out insulation and debris that could prevent the float from rising

Sid Harvey Item #:AG-1200: Replaces Part #:'s : 2R034A,

AG-1200

,

AG-1200

RectorSeal® Aquaguard AG-1250E Multi-Purpose Water Sensor, 24 VAC, 5 The AG-1250E multipurpose water sensor is mounted directly in a metal or plastic secondary pan, floor or wall. The AG-1250E is a high-amperage, solid state sensor with no moving parts to break down or become clogged. The low profile design makes it easy to install.,

AG-1250E

,

AG-1250E

RectorSeal® Goliath furnace series secondary drain pans offer all the same benefits and features of our Goliath series secondary drain pans and are specifically designed for the unique clearance needs of furnace installations and piping requirements.

• 30" x 36"

,

AG-GF-30X36

,

AG-GF-30X36

RectorSeal® Goliath Value 96216 ABS Plastic Secondary Drain Pan, 30" x 62" Goliath value series secondary drain pans are the affordable solution for fixed placement, solid surface applications when hanging a secondary drain pan and HVAC unit is not necessary. They are Made with Pride in the USA from our patented advanced polymer DexElar material and feature a network of built-in risers, which are compatible with a wide variety of sizes of HVAC units.,

AG-GV30X62

,

AG-GV30X62

RectorSeal® Goliath series secondary drain pans are the strongest, most rugged HVAC secondary drain pans on the market today. Made with pride in the USA from our own patented blend of advanced polymer DexElar® material, Goliath series secondary drain pans are engineered with superior one-piece structural strength to produce a nearly indestructible drain pan with rolled edges and no seams. Goliath series secondary drain pans provide extreme temperature durability (-4 to 26 deg F), high tensile strength, crack/split/leak/rust resistance, and are self extinguishing. Each pan is strong enough to hang using only one pair of steel support struts, ensuring a quick-and-easy professional installation. They also feature a network of built-in risers, which are compatible with a wide variety of sizes of HVAC units and eliminate the need to shop around for additional risers or mounting blocks. Some Goliath pans have lower risers when space is restricted. Risers run the length of pan for better strength when hanging. Each pan has specially designed indentations for placement of hanging brackets. Goliath series secondary drain pans are compatible with our AG-42 condensate management system water sensor and drain adapter as well as AG-GFR Vibration Isolators to quiet any noisy HVAC unit.

• Made with pride in the USA from our own patented blend of advanced polymer DexElar® material
• Goliath series secondary drain pans are engineered with superior one-piece structural strength to produce a nearly indestructible drain pan with rolled edges and no seams
• Hangable
• 3/4" PVC with proprietary adapter
• 1 years warranty

Sid Harvey Item #:AG-G30x50: Replaces Part #:'s : B98-768,

AG-G30X50

,

AG-G30X50

RectorSeal® Goliath series secondary drain pans provide extreme temperature durability (-40 to 260 deg F), high tensile strength, crack/split/leak/rust resistance, and are self extinguishing. Each pan is strong enough to hang using only one pair of steel support struts, ensuring a quick-and-easy professional installation. They also feature a network of built-in risers, which are compatible with a wide variety of sizes of HVAC units and eliminate the need to shop around for additional risers or mounting blocks. Some Goliath pans have lower risers when space is restricted. Risers run the length of pan for better strength when hanging. Each pan has specially designed indentations for placement of hanging brackets. Goliath series secondary drain pans are compatible with our AG-4200 Condensate Management System water sensor and drain adapter as well as AG-GFR Vibration Isolators to quiet any noisy HVAC unit. (Sold separately).

• Made with pride in the USA from our own patented blend of advanced polymer DexElar® material
• Goliath series secondary drain pans are engineered with superior one-piece structural strength to produce a nearly indestructible drain pan with rolled edges and no seams
• Hangable
• 3/4" PVC with proprietary adapter
• 10 years warranty

Sid Harvey Item #:AG-G30x62: Replaces Part #:'s : B98-770,

AG-G30X62

,

AG-G30X62

RectorSeal® Goliath series secondary drain pans provide extreme temperature durability (-40 to 260 deg F), high tensile strength, crack/split/leak/rust resistance, and are self extinguishing. Each pan is strong enough to hang using only one pair of steel support struts, ensuring a quick-and-easy professional installation. They also feature a network of built-in risers, which are compatible with a wide variety of sizes of HVAC units and eliminate the need to shop around for additional risers or mounting blocks. Some Goliath pans have lower risers when space is restricted. Risers run the length of pan for better strength when hanging. Each pan has specially designed indentations for placement of hanging brackets. Goliath series secondary drain pans are compatible with our AG-4200 Condensate Management System water sensor and drain adapter as well as AG-GFR Vibration Isolators to quiet any noisy HVAC unit. (Sold separately).

• Made with pride in the USA from our own patented blend of advanced polymer DexElar® material
• Goliath series secondary drain pans are engineered with superior one-piece structural strength to produce a nearly indestructible drain pan with rolled edges and no seams
• Hangable
• 3/4" PVC with proprietary adapter
• 10 years warranty

,

AG-G28X69

,

AG-G28X69

RectorSeal® AG-4000 Series are complete condensate management systems for our Goliath Series Secondary Drain Pans, Goliath Furnace Series Secondary Drain Pans, Goliath Value Series Secondary Drain Pans, and Titan Flexible Series Secondary Drain Pans. Series are available with optional AG-GFR Vibration Isolators to quiet any noisy HVAC or furnace unit in addition to their condensate overflow switch and 3/4" PVC threaded male pipe adapter with rubber gasket. They can also be combined with our AG-9100 External Audible & Visual Remote Alarm, which can be conveniently located over 250 feet away from the condensate overflow switch and secondary drain pan.

• Magnetic condensate overflow switch
• 3/4" PVC threaded male pipe adapters and rubber gasket
• 14 AG-GFR vibration isolators
• Easy, drill-free installation
• Pull up test knob
• Water detection LED light
• Protective cover

,

AG-4200M

,

AG-4200M