Each tank needs to be installed with an oil gauge. The gauge base is treaded 2" NPT with a rubber"O-Ring" for sealing. It needs to be mounted on 1 of the plastic adapters provided with the tank with no need for pipe dope or Teflon tape on the threads. Must be hand tightened only. String and float must be released slowly during installation to prevent damage to the gearing or loosening the line off the reel. Housing design and color may differ depending on tank model.

roth 2335000191

Roth Parts 2347221700 Copper Spigot Adapter

2347221700

Granby Ecogard 245201 Electrostatic Powder Paint 12 ga Steel Double Bottom Oil Tank Residential Vertical, 330 Gallon, 72" L x 27" W x 44" H, Beige

• Double-bottom design for utmost protection against leaks
• Visual primary tank monitoring system
• Welded lap joint: the strongest one
• Standard dimensions of the tank and positioning of the NPT openings for simple and easy retrofit installation
• Two large grip handles on both sides for greater ease of manipulation
• The handles are recessed and never in the way
• Phosphate washed and oven-dried paint coated
• Light color paint finish such that condensation is less likely to occur within the tank
• Robust tank leg brackets for greater stability
• All tanks are factory pressure tested prior to shipping
• Operation at atmospheric pressure only
• 25 years against manufacturing defects and internal corrosion

,
,

granby 245201

granby 245201

Roth 2350000999 Ventalarm

Unless another UL approved system for fill level detection is used, all tanks must have a vent alarm (whistle) installed
• We require the use of our proprietary vent alarm in each tank
• This vent alarm also provides a 2" NPT adapter for easy connection of your vent piping to the tank
• The Roth vent alarm is installed in place of 1 of the plastic adapters in the top of the tank
• Use the cap nut and a #3 gasket (already supplied with the Roth vent alarm) to secure the vent alarm in the manner described in the Roth EcoDWT plus 3 installation instruction manual
  
  

  Roth 2350000999

Roth 2350363024 PEX Brass 90 Degree Elbow

• 1/"2 x Barb 10/Pk,
  ,
  
  
  
  

  2350363024

  
  

  2350363024

Each tank needs to be installed with an oil gauge. The gauge base is treaded 2" NPT with a rubber"O-Ring" for sealing. It needs to be mounted on 1 of the plastic adapters provided with the tank with no need for pipe dope or Teflon tape on the threads. Must be hand tightened only. String and float must be released slowly during installation to prevent damage to the gearing or loosening the line off the reel. Housing design and color may differ depending on tank model

roth 2335003411

Roth 2350534560 PEX Female Adapter 3/4" Barb x 3/4" OD,
,

2350534560

2350534560

Oil Tanks 2335000364 Plastic Ties 100/PK

2335000364

2335000364

Roth 2350535756 PEX Adapter

• 1/2" x 1/2" Barb x MPT,
  ,
  
  
  
  

  2350535756

  
  

  2350535756

Each tank needs to be installed with an oil gauge. The gauge base is treaded 2" NPT with a rubber"O-Ring" for sealing. It needs to be mounted on 1 of the plastic adapters provided with the tank with no need for pipe dope or Teflon tape on the threads. Must be hand tightened only. String and float must be released slowly during installation to prevent damage to the gearing or loosening the line off the reel. Housing design and color may differ depending on tank model

Roth 2335003723

Roth 2335003721 18 ga Steel Tank Cover for 1000LH Double Wall Lubrication Oil Tanks

roth 2335003721

Roth 2340055354 Valve Actuator, 24 VAC

Allows 1-manifold set to supply multiple zones
• Attaches to return manifold
• Thermostat controlled
• Normally closed - pop-up indicates activation
• 4-wire: 2-power, 2-end switch
  
  

  2340055354