Clarcor Air Filtration MERV 4 Standard Air Filter 13" x 20" x 1"
Clarcor Filters are a standard grade Air filter of the same type that has been protecting furnaces and central air conditioners around the world for over 50 years. The filtering medium is continuous filament spun glass. For peak equipment protection and energy efficiency, these filters should be changed monthly in periods of high use. This filter is effective against the following contaminants: household dust, as well as debris and lint. Lasts up to 30 days, comes in a Box of 12.,
,

13X20X1

13X20X1

How often do I need to change my air filter?

There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.

What is MERV?

MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles

14X18X1PL

14X18X1PL

The Hi-E 40 is a medium efficiency pleated filter, available in 1" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.

• Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 10 performance
• Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
• Heavy duty beverage board frame - moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
• 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
• Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
• Galvanized steel pleat support
• Stronger adhesive with more bonding points
• Lower initial resistance for energy saving
• Medium efficiency pleated filter
• Made in USA

,
,

14X30X1PL

14X30X1PL

Clarcor Air Filteration Polyester Air Filter, 14 x 30 x 1" An inexpensive panel filter offering improved performance over fiberglass. Moisture resistant, coated frame. Graduated density polyester media with fire retardant binder. Suitable for temperatures up to 200 degrees F. Should be changed monthly. UL listed Class II. Available in many standard 1inch and 2 inch sizes. Packaged in cases of 12. ,
,

14X30X1PF

14X30X1PF

The Hi-E 40 is a medium efficiency pleated filter, available in 1" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.

• Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 10 performance
• Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
• Heavy duty beverage board frame - moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
• 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
• Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
• Galvanized steel pleat support
• Stronger adhesive with more bonding points
• Lower initial resistance for energy saving
• Medium efficiency pleated filter
• Made in USA

,
,

Purolator 14X24X1PL

Purolator 14X24X1PL

How often do I need to change my air filter?

There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.

What is MERV?

MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles

13X21-1/2X1PL

13X21-1/2X1PL

How often do I need to change my air filter?

There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.

What is MERV?

MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles

14X14X2PL

14X14X2PL

The Hi-E 40 is a medium efficiency pleated filter, available in 1" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.

• Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 10 performance
• Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
• Heavy-duty beverage board frame moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
• 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
• Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
• Galvanized steel pleat support
• Stronger adhesive with more bonding points
• Lower initial resistance for energy saving
• Medium efficiency pleated filter
• Made in USA

,
,

14X25X2 PL

14X25X2 PL

How often do I need to change my air filter?

There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.

What is MERV?

MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles

Glasfloss 14X30X2PL

Glasfloss 14X30X2PL

How often do I need to change my air filter?

There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.

What is MERV?

MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles

14X23X1PL

14X23X1PL

Clarcor Air Filteration Pleated Air Filter, 14 x 14 x 1"
Clarcor Air Filteration Pleated Air Filter, 12 x 20 x 1" Clarcor Pleated Air Filters Improve your indoor air quality with the MERV 8 rating. MERV 8 filters capture 90% of airborne particles, including dust, debris, lint, pollen, and pet dander. The MERV 8 filter is ideal for standard residential and commercial use. Filters should be replaced every 90 days, more often if you have pets, children, or allergy-sufferers at home. We recommend regularly replacing your filter to ensure your air stays clean and furnace or Air Condtioning Unit works properly.,
,

14X14X1PL

14X14X1PL

Purolator 14x14x1PF MERV 4 Polyester Standard Air Filter 14" x 14" x 1" Made with 100% Synthetic Fibers, Heavy Duty Bevearage Board
Our long standing excellence in providing durable, top performing disposable filters is applied to the manufacturing of poly fiber P312 filters. Ideally suited for residential, commercial, or light industrial use, the polyester media was developed for situations where synthetic media products are required.

• Frame is produced using post-consumer recycled materials
• The unique monobond p" frame concept involves a 1-piece frame sealed to the media under heat and pressure
• The synthetic media consists of polyester fibers bonded together in an interlocking pattern of tiny lint and dust traps and this configuration maximizes dust loading while minimizing resistance to air flow and surface loading
• Improved aerodynamics reduce restriction to air flow
• Safe, easy, fast installation
• Larger effective filtering surface area
• Classified class 2 by UL
• Filters perform best in conditions where large quantities of lint and dust are present
• The rugged construction makes these filters industry leaders in the high velocity system, prefilter market
• Made in USA

,
,

Purolator 14X14X1PF

Purolator 14X14X1PF