Robertshaw Controls 10-021 Natural Gas Pilot Orifice for 1820, 1830 (2C, 2CH, 2S, 2SH) Pilots, Heating and Cooking, 0.018"

Robertshaw G544-20

The Robertshaw 720 series lever actuated gas valves are designed for intermittent pilot ignition applications. This series incorporates a manual valve, pilot valve, (2) dual automatic valves and a main gas pressure regulator. Uni-Kit models are factory set at 3.5" WC for natural gas, but can be converted to LP by installing the regulator conversion kit included. The 720 Series is designed for many residential applications such as central heating units, space heaters, wall heaters, boilers, and mobile home furnaces. This valve has a compact swing radius of only 3-9/16" to enable it to fit a wide range of OEM replacement applications

Robertshaw G566-50

The Robertshaw 700 Series Combination Gas Valves offer replacement flexibility. With three-position outlets and multi-positional capability, these combination gas valves offer unlimited replacement possibilities. The 24 Volt Uni-Kit models are suitable for either natural or LP gas. The valve is factory set at 3.5" WC natural gas. A regulator cover plate is included to convert to LP gas.

Robertshaw G647-99

Robertshaw Controls G566-60 Hot Surface Ignition Control Module 780-34NL306A

G566-60

The Robertshaw 710 series low capacity gas valves feature an extremely compact control designed for low capacity and limited space applications. Features include 3-position outlets, multi-positional capability and component replaceability.

G665-1

The Robertshaw 1900 series thermocouples include either a special low-mass or quick dropout thermocouple. It is usually found on applications that require an oxygen depletion system on the thermo safety. It is also found on many LP gas applications that require a quick dropout of the thermo safety if there is a loss of pilot flame.

G364-33

Robertshaw G364-40 Thermocouple Snap-Fit 18"

Robertshaw G364-40

The Robertshaw 1900 Series Thermocouples include either a special low-mass or quick dropout thermocouple. It is usually found on applications that require an oxygen depletion system on the thermo safety. It is also found on many LP gas applications that require a quick dropout of the thermo safety if there is a loss of pilot flame. The Robertshaw 1980 Series Snap-Fit Thermocouples offer easy installation into the majority of pilot burners. They are manufactured without complicated adaptors, but with extra insulation that the brass sheath provides under high ambient temperatures.

G364-41

The Robertshaw 1900 series thermocouples include either a special low-mass or quick dropout thermocouple. It is usually found on applications that require an oxygen depletion system on the thermo safety. It is also found on many LP gas applications that require a quick dropout of the thermo safety if there is a loss of pilot flame.

Robertshaw G364-43

The Robertshaw 710 series low capacity gas valves feature an extremely compact control designed for low capacity and limited space applications. Features include 3-position outlets, multi-positional capability and component replaceability.

Extremely compact control designed for low capacity and limited space applications
• Include 3-position outlets, multi-positional capability and component replaceability
• Gas cock dial marking off-pilot-on
• Standard NEMA terminals
• Inlet filtered screen
• Various gas types - natural, manufactured, mixed, LP and LP/air mixtures
• 36" capillary length
• (2) 1/2 x 3/8" NPT reducer bushing
• Straight line regulation
• Low capacity compact size
• Outlet screen
• Pressure taps for checking inlet and outlet gas pressure
• Convenient 1/4 and 3/16" spade connector to prevent miss-wiring
• Any angle between 0 and 90 deg from upright
• pilot gas filters
• Field upgradable
• 2 cfh pilot capacity
  
  

  Robertshaw G665

The Robertshaw 110 series water heating gas valves are designed for universal replacement applications in water tanks. All models feature a built-in, non-cycling energy cut-off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. The ECO is designed to detect over-temperature conditions and to open. Once opened, the control will not function and a new replacement will be required.

Domestic, commercial and recreational vehicle water heater thermostat uni-kits
• Include 5-1/2" sensing element
• Various inlet size, outlet size, regulator settings and shank lengths
• Right hand threads
  
  

  G664-32

Robertshaw thermopiles are the industry leader for gas appliance applications. Their primary function is to ensure a standing pilot light is operative so that on a call for heat, the main burner gas will be properly ignited. Thermopiles are placed in gas applications to detect the existence of a flame for safety purposes by shutting off the potential gas flow to a burner. A thermopile is the assembly of many thermocouples to increase the millivolt output. Robertshaw thermopiles have two types of connections: coaxial and two-wire spade connectors. The 1951 thermopiles, also known as CP-2 (500 - 600 MV) are coaxial connectors. The 1950 and 1951 series thermopiles (pilot generators) are designed for use on self-powered gas control systems. They can be used to replace similar competitive devices.

Robertshaw G391-30