HE Series  Product Features

High efficiency lanced fin design.

No-hassle 5 year warranty. 10 year Limited Warranty available.

R-22, R-410A, AC & Heat Pump compatible.

All coils have durable packaging with bar coded labels on the box.

Threaded expansion valves available factory installed or as a field installed kit.

Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air.

Piston options include externally accessible body for easy piston change out and/or TXV installation.

Microban antimicrobial additive to inhibit the growth of mold and mildew in the drain pan.

UV resistant drain pans are molded of high temperature (450 deg. F) engineered polymer.

Dual 3/4" FPT condensate drains on front-left and front-right side of drain pans.

Patented HydroTEC low water retention drain pan.

Copper refrigerant connections for easy brazing on both copper and aluminum slab models.

Intertek lab tested 1% or less cabinet air leakage for better efficiency.

Cased coil cabinets are fully lined with 5/8" foil faced insulation.

Optional painted or embossed galvanized steel cabinets.

Short cabinet with easy access.

Non-captive refrigerant lines with long Stubs make for easy installation.

Enhanced refrigerant pipe grommets: secure, tight, and easy to install.

Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV

Thermo Pride HE33936PA212

The Thermo Pride story - located right here in the United States, Thermo Products, makers of Thermo Pride heating and cooling equipment, is known for superior workmanship and product innovation. Thermo Products is committed to producing handcrafted products that provide your family with reliability, comfort, durability, quiet operation and high efficiency. You will have the peace-of-mind that comes from knowing your gas Thermo Pride mobile home furnace is anything but a mass-produced, low-cost compromise between quality and price. Reliability - whether you are upgrading to save energy or your current furnace has failed, you will want to replace it with one that is both dependable and economical. Thermo Pride mobile home furnaces are designed and built specifically as replacement furnaces, so you can easily upgrade the heating or cooling system in your home.

• Integrated coil cabinet for easy air conditioning installation
• Aluminized steel primary heat exchanger
• Stainless steel secondary heat exchanger
• Silicon nitride igniter for quiet and consistent light-off
• 2-piece top design for easy access to vent pipes
• Concentric vent kit available using existing roof jack and standard base
• PVC venting
• Lifetime heat exchanger warranty and 10 years parts warranty
  

Thermo Pride OL8RA119T60 Oil Furance Direct Drive 101-132 BTU Output Rear Flue,

,

thermo products ol8ra119t60

thermo products ol8ra119t60

Thermo Products OT16-125FBP Oil Furnace Horizontal 123K BTU Front Flue Direct Drive PSC Motor,
,

OT16-125FBP

OT16-125FBP

Thermo Pride OME-72T36 Steel Mobile Home Oil Furnace, 86% AFUE, 120 volt, 85000 BTU Input, 72000 BTU Output

• Durable reinforced interlocking steel casing with powder coated finish
• Highly efficient, 16 ga aluminized steel Octatherm heat exchanger, top-quality control system, easy-access service port
• Foil-faced fiberglass insulation and high-efficiency, direct-vent oil burner
• Designed to fit many existing bases and optional combustion air connection, insulated blower compartment
• High torque, low speed, direct drive motor and easy access, easy cleaning, permanent, washable filter
• Partitioned burner and blower compartments
• Pre-purge, post-purge, positively closing solenoid oil burner is safe and odor-free
• Intermittent ignition system

,
,

thermo pride ome-72t36

thermo pride ome-72t36

Thermo Pride OL8FA119T60 Oil Furance Direct Drive 101-132 BTU Output Front Flue,
,

thermo products ol8fa119t60

thermo products ol8fa119t60

Thermo Pride OME-72D36 Steel Mobile Home Oil Furnace, 86% AFUE, 120 volt, 85000/70000 BTU Input, 72000/60000 BTU Output

• With Beckett AFG burner
• Durable reinforced interlocking steel casing with powder coated finish
• Highly efficient, 16-gauge aluminized steel Octatherm heat exchanger, top-quality control system, easy-access service port
• Foil-faced fiberglass insulation and high-efficiency, direct-vent oil burner
• Designed to fit many existing bases and optional combustion air connection, insulated blower compartment
• High torque, low speed, direct drive motor and easy access, easy cleaning, permanent, washable filter
• 12" width x 12" depth supply air outlet
• 14" height x 22" depth return air outlet
• 4" flue diameter
• Partitioned burner and blower compartments
• Pre-purge, post-purge, positively closing solenoid oil burner is safe and odor-free
• Intermittent ignition system

,
,

thermo pride ome-72d36

thermo pride ome-72d36

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Gallonvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Gallonvanized steel allows us to create fittings that are rust-resistant and durable.

Thermo Products Parts PK181X201

Thermo Products Parts PK181X201

All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.

Thermo Products Parts PK181X191

Thermo Products Parts PK181X191

Thermo Products Parts PK161X201 Plenum Duct 20" x 16" x 36" OLV8,OLV11

Thermo Products Heating Parts PK161X201