A unique thread design and quality controlled manufacture spell the Zip-In's difference. Zip-In's sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical point strength. A single starting thread is formed down to the very tip of the point and is the source of Zip-In's penetrating power. A second thread above the point engages after initial penetration and drills in the screw double fast. Zip-In screws are faster driving, with a greater capacity for fastening heavier gauges of sheet metal than any other self-piercing type.

Head will not strip out of hex driver opening
• Undercut - always seats flush
• Burr free
• Patented head markings U.S. patent number D524638
• Sharp tapered point will not walk, mushroom or break
  
  

  Malco HW8X12ZP

A unique thread design and quality controlled manufacture spell the Zip-In's difference. Zip-In's sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical point strength. A single starting thread is formed down to the very tip of the point and is the source of Zip-In's penetrating power. A second thread above the point engages after initial penetration and drills in the screw double fast. Zip-In screws are faster driving, with a greater capacity for fastening heavier gauges of sheet metal than any other self-piercing type.

Head will not strip out of hex driver opening
• Undercut - always seats flush
• Burr free
• Patented head markings U.S. patent number D524638
• Sharp tapered point will not walk, mushroom or break
  
  

  HW8X34ZP

Malco HW8X3/4Z-10M Zinc-Plated Steel Indented Hexagonal Washer Head

HW8X3/4Z-10M

HW8X3/4Z-10M

Malco CG10 Utility Caulking Gun, 1/10 Gallon

• Easy loading and lightweight for smooth, clean operation

Sid Harvey Item #:J14-5: Replaces Part #:'s : G32-382,
,

Malco J14-5

Malco J14-5

Malco precision fit and hardened magnetic hex chuck drivers, with 1/4" power insert shanks, meet on-the-job demands for performance and service life whether installed on a power drill or used with a Connect quick change handle. Hex driver sizes are color coded for easy identification and are available in shorts, longs and extra long sizes.

Sid Harvey Item #:MSHL5/16: Replaces Part #:'s : 13390,
,

MSHL5/16

MSHL5/16

Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4 in power insert shanks, meet on-the-job demands for performance and service life whether installed on an electric power drill or used with a CONNExT Quick Change Handle. Hex Driver sizes are color coded for easy identification and are available in shorts, longs and extra long sizes.

• 9/16" nose diameter

,
,

MSHXL38

MSHXL38

Sleek styling, easy blade replacement and larger handles make the Andy Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in tight material, shapes such as J-Channel. A full 3 in (76.2 mm) cutting length makes straight shearing with the Malco Andy Snip fast and easy. Blade replacement is easily accomplished in the field.

• Larger handle loops
• Sleek head design improves maneuverability

Sid Harvey Item #:MC12A: Replaces Part #:'s : 27117,
,

MC12A

MC12A

Malco C-RHEx MSHxLC Cleanable Reversible Dual Side Magnetic Hex Driver, Quickly change between 1/4 and 5/16" hex sizes with Malcos unique, exclusive, dual-sided magnetic hex drivers. The reversible hex socket fits over a 1/4" magnet-tipped, ball locking hex shaft, and can be quickly reversed to change sizes. Eliminate troublesome buildup of metal shavings in the hex tip with the easy clean magnet. Just swipe with a glove or shop towel to clear any metal shavings. Tested torque of the reversible hex chuck driver design is equal to one-piece drivers.,
,

Malco MSHXLC

Malco MSHXLC

Malco precision fit and hardened magnetic hex chuck drivers, with 1/4" power insert shanks, meet on-the-job demands for performance and service life whether installed on a power drill or used with a Connect quick change handle. Hex driver sizes are color coded for easy identification and are available in shorts, longs and extra long sizes.

Sid Harvey Item #:MSHxL1/4: Replaces Part #:'s : 13393,
,

MSHXL1/4

MSHXL1/4

Malco Dual Sided Hex Driver Cleanable Reversible Magnetic

5/16" & 3/8"

MSHC1

MSHC1

This unique, exclusive, (U.S. Patent Pending), double-duty chuck driver ensures that popular 1/4" and 5/16" magnetic hex drives are always at hands reach. The dual-sided hex socket fits over a 1/4" magnet-tipped, ball-detent locking hex shaft and is quickly reversed for changing sizes. Tested torque of the socket and shaft is equal to comparable one-piece single size drivers to ensure optimum screw performance. The removable, reversible socket also allows easy access for cleaning the magnet tip to eliminate any troublesome buildup of metal shavings in the hex opening. Positive engagement of hex head fasteners is never compromised. The number MSHC reversible hex chuck driver is ideal for pairing with Malco Zip-In self-piercing or Bit-Tip drill and tap metal screws.

• Tested one-piece driver strength
• Easy clean magnet

,
,

Malco MSHC

Malco MSHC

Malco precision fit and hardened magnetic hex chuck drivers, with 1/4" power insert shanks, meet on-the-job demands for performance and service life whether installed on a power drill or used with a Connect quick change handle. Hex driver sizes are color coded for easy identification and are available in shorts, longs and extra long sizes.

Sid Harvey Item #:MSHL1/4: Replaces Part #:'s : 13388,
,

MSHL1/4

MSHL1/4