The L62 series Baso safety shutoff devices are for use on all gas-fired, standing pilot equipment that requires main burner shutoff when the pilot is extinguished. Typical applications include domestic central heating and commercial space heating appliances, as well as industrial processing equipment (for example, die-casting machines and degreasers). Monitor the pilot flame through the use of a thermocouple. If the pilot flame is extinguished, the switch will interrupt gas flow to the main burner and pilot burner, shutting down the appliance.

The L62 has a manual reset feature, and is available in models with or without 100% shut-off
• The L62 has a thermo-electric power unit assembly that receives its energy from a heated thermocouple
• If the pilot flame is extinguished, the main valve circuit is interrupted and gas flow to the main burner (and pilot burner in 100% shut-off model L62GB) is stopped
• Both L62 models contain an electric interruption feature that only allows pilot gas flow during the lighting or resetting cycle
• When lighting the pilot, the main valve electrical circuit is interrupted until the pilot flame is established and the reset butTon is released
• Allows only pilot gas flow during lighting cycle
• 1 conduit opening
  
  

  Johnson Controls G570

Low Pressure Control 20" to 100 psig, 7 to 50 psi differential, 1/4" MFL, SPST open low, 17 Amps 240 V

Johnson Controls P170AB-2

Johnson Controls Penn P545NCB-82C Electronic Lube Oil Control, 120 - 240 VAC, 40" Capillary

Johnson Controls P545NCB-82C

Johnson Controls P32AC-2C Pressure Switch .05-5" WC

Johnson Controls P32AC-2C

Johnson Controls P32AF-1 Closed Differential Adjustable Set Point Sensitive Pressure Switch 24 - 277 VAC, SPDT, 0.05 - 5" WC, 0.018 - 0.12" WC Differential

Johnson Controls P32AF-1

Johnson Controls Penn P170DA-1C Single Pressure Control, 50 - 500 psi, SPST, 1/4" Male SAE

Johnson Controls P170DA-1C

Johnson Controls P545NCB-22 Oil Failure Control 120 Second W/Alarm Contacts

Johnson Controls P545NCB-22

Johnson Controls P66AAB-1C Electronic Fan Speed Control, 208 - 240/277/480 VAC, 60 Hz, 190 - 250 psig, 60" L Capillary

Single input sensor model
• Start voltage - 10% of supply voltage
• Electronic fan speed controls are refrigerant pressure actuated, electronic motor-speed controllers
• Provide condenser pressure control by directly sensing condenser refrigerant pressure and automatically adjusting the condenser fan motor speed according to the sensed pressure
• Provides an alternative to fan cycling control in many small and medium size refrigeration and heating, ventilating and air conditioning (HVAC) applications
• Pressure transducer responds quickly to condenser pressure changes and condenser air delivery requirements
• Soft start capability provides a smooth fan startup, which reduces motor-starting noise and abrupt changes in motor speed
• Built-in voltage surge protection, radio frequency interference (RFI) suppression and ground terminal screw
  
  

  Johnson Controls P66AAB-1C

Johnson Controls P170MA-1C Dual Pressure Control W/Manual Reset, LS 20-100 psi, HS 100-425 PSI

Johnson Controls P170MA-1C

Johnson Controls P100AP-2C Low Pressure Switch Open 35 Close 60

Johnson Controls P100AP-2C

Johnson Controls Penn P70AA-400C Single Pressure Control, 100 - 470 psi, SPST, 1/4" Flare Nut

Johnson Controls P70AA-400C