Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

JB Industries CCLE-60 Refrigerant Charging Hose Set 1/4"x 60" Red/Yellow/Blue

JB Industries Kobra CCLV-60 Kevlar High Pressure Charging Hose Set with CLV series hoses feature a ball valve 6" whip end that opens to full flow. Our patent pending design of the fittings features a hood that locks the gasket into the fitting with a straight edge to straight edge force that eliminates the blowout of the gasket. The barbed depressor locks into the gasket, exuding more outward force and pushing the gasket further into place. This depressor is precisely machined for maximum flow and has a dimple that guides the valve core into place. Kobra high pressure hoses are made from Kevlar - the same material that stops bullets in bullet-proof vests. Kevlar makes our hoses strong and flexible, while the nitrile cover extends the life of the hoses better than neoprene. Kobra hoses are made in the USA.

JB Industries Kobra CCLV-72 High Pressure Charging Hose Set, 1/4, 72" L, 800 psi, Red/Blue/Yellow

5 to 1 safety factor
• 1/4 turn lever style ball valve on 6" whip end
• Use rebuild kit 90514
• Use P511 as a replacement gasket
• Use P90514 as replacement depressor
  

JB Industries Kobra CCLS-72 High Pressure Charging Hose Set, 1/4" FNPT, 72" L, 800 psi, Red/Blue/Yellow

5 to 1 safety factor
• Rebuildable
• Opens to full flow
• Stainless steel thrust washer insures free rotation even under high pressure
• 3-point contact on depressor
• Low loss fitting adapters available
• These hoses are suitable for R-410A and can be used with all common refrigerants except ammonia
• JB also uses a common crimp that grips the full circumference of the hose yielding a maximum hold and uniform seal that prevents leaks and bursts
• Kobra hoses feature a nitrile cover which is better than neoprene because it is more resistant to oil, giving the hoses a longer life
• Use P90022 as replacement o-ring
  

JB Industries Kobra CCLV-48 High Pressure Charging Hose Set, 1/4, 48" L, 800 psi, Red/Blue/Yellow

5 to 1 safety factor
• 1/4 turn lever style ball valve on 6" whip end
• Use rebuild kit 90514
• Use P511 as a replacement gasket
• Use P90514 as replacement depressor
  

Instrument Type R ,

JB Industries DV-22 Digital Vacuum Gauge 10-10000 Micron

JB Industries DV-T1 JB Industries Vacuum Pump Oil Caddy,
JB Industries DV-T1

Features

A2L Compatible

1/2 HP DC motor with broad operating voltage range

Dual-voltage 115/230V DC motor with sliding voltage switch

Angled easy access 1/4", 3/8" or 1/2" intake tee

Ergonomic 1/2" NPT handle and lift ring for easier hoisting

Check oil level at any time with LED back-lit sight glass

IEC 10' Locking Cord

One-shot, full quart oil fill - Integrated bottle seal piercing spike for quick oil changes

Drains oil 3x faster with 1/4 turn ball valve drain

Blank-off isolation valve isolatesthe pump from the system

Gas ballast for extended oil life

Wide, four point stablebase for better balance with cap storage

100% Factory Tested

Premium all metal construction with heavy-duty finned aluminum housing,

American-manufactured brass fittings and stainless steel valving

100% Field Repairable

2-Year Warranty

JB Industries DS-20000 Electronic Refrigerant Charging Scale, 220 lb, Digital Display

Solid state load cell accurate to 1/4 oz/10 g without need of cylinder directly on center of weighing platform
• LCD screen on a handheld can be read from a distance or in direct sunlight
• Pieces are modularized so parts are easily replaced without need to purchase entirely new unit
• Displays weight in decimal pounds, pounds and ounces and kilograms
• Auto shut-off after 30 min to preserve battery and can be disabled
• Optional charging module (DS-MOD) turns the Atlas into a charging station without the cylinder ever leaving the weighing platform, transfers up to 999 lb in charging increments of 1/4 oz (10 g)
• Carrying Case, Battery and Instructions
  

12-quart bottles of Black Gold Vacuum Pump Oil. Black Gold Vacuum Pump Oil is the gold standard in vacuum pump care. For use in any vacuum pump, Black Gold is extremely pure and non-detergent. Our Black Gold is hydro processed, meaning it goes through a series of catalytic steps rendering the oil extremely refined, more viscous, and more stable. The result is clear mineral oil which will alert you to contamination sooner as it becomes cloudy or milky. In extreme temperatures, the oil will be more resistant to contaminants. We still recommend, however, that the oil be changed after every evacuation for maximum performance and pump efficiency.
The best test to see if your oil is contaminated is through a micron gauge. With a leak-free system, if your DV-22N micron gauge is still not reading a deep vacuum, the oil is too contaminated and should be changed. If the micron gauge pulls down to about 50 microns the oil is good."

Base: Mineral Oil
• Size: 1 qt.
• 12 in. long
• SAE Grade: 15
• ISO Viscosity Grade: 46
• Flash Point: 444.2 Degrees F
• Specific Gravity: 0.877
• Temp. Range: -29 Degrees to 514 Degrees F
• Viscosity @ 100C: 6.395 cSt
• Viscosity @ 40C: 41.54 cSt
• Viscosity Index: 102
• Application: For Use In Any Vacuum Pump
• Standards: ABB G12106, AGMA Grade 3 Non-EP, ASTM D4304 Type 1 Turbine Oil, Dennison Hyd HF-1, GEK 101941K-GEK46506e-GEK 27070, Solar Turbines ES9-224 II, Mil Spec MIL-L-17672D, US Steel 128