Home  > JB INDUSTRIES(x)
|◀ 13 - 24 of 174 ▶|
View:
JB Industries A31160 Access Elbow 90 Degree 5/8" OD
Item#:
A31160
Manufacturer Item:
A31160
Manufacturer:
JB INDUSTRIES
JB Industries A31164 Access Elbow 90 Degree 7/8" OD
Item#:
A31164
Manufacturer Item:
A31164
Manufacturer:
JB INDUSTRIES
JB Industries MR-BVK Ball Valve Manifold Repair Kit, for Use With 4-Valve
Item#:
MR-BVK
Manufacturer Item:
MR-BVK
Manufacturer:
JB INDUSTRIES
JB Industries MR-596 Gauge Boot Set, for Use With 3-1/8" Gauge,
Item#:
MR-596
Manufacturer Item:
MR-596
Manufacturer:
JB INDUSTRIES
JB Industries Black Gold DVO-24 VAC uum Pump Oil, 6 Gallon Bottle, Petroleum, Liquid, Clear - Yellow
  • Black gold VAC uum pump oil is the gold standard in VAC uum pump care
  • For use in any VAC uum pump, black gold is extremely pure and non-detergent
  • Black gold is hydro processed which means it goes through a series of catalytic steps rendering the oil extremely refined, more viscous and more stable
  • Result is clear mineral oil which will alert to contamination sooner as it becomes cloudy or milky
  • In extreme temperatures, the oil will be more resistant to contaminants
  • Oil be changed after every evacuation for maximum performance and pump efficiency
  • Best test to see oil is contaminated is through a micron gauge, with a leak free system
  • Viscosity is a measure of the weight of the oil
  • For industrial oil, the viscosity is an ISO grading at 40 deg C
  • Black gold VAC uum pump oil is an ISO 41, special to this type of application
  • 21 cSt at 104 deg F
Sid Harvey Item #:DVO-24: Replaces Part #:'s : 41227
Item#:
DVO-24
Manufacturer Item:
DVO-24
Manufacturer:
JB INDUSTRIES
JB Industries 96823 Black Paint Marker
Item#:
96823
Manufacturer Item:
96823
Manufacturer:
JB INDUSTRIES
JB Industries MR-595 Protective Gauge Boot, for use with M2-860 3-1/8"
Item#:
MR-595
Manufacturer Item:
MR-595
Manufacturer:
JB INDUSTRIES
JB Industries M2-5-410A Brass 2-Valve Manifold Gauge, 800 psi High Side, An industry standard for countless years, the JB M2 series of manifolds features our full flow design for faster evacuation/charging. Coupled with an angled bar for better knuckle clearance in rotating the hand wheels and the original free flowing dual O-ring sealing system, the M2 is the classic American made manifold. All of JB's brass manifolds are equipped with heavy-duty metal gauge cases for added durability.
Item#:
M2-5-410A
Manufacturer Item:
M2-5-410A
Manufacturer:
JB INDUSTRIES
JB Industries The Shield SHLD-BIT Brass Bit Key for Shield Refrigerant Locking Caps
  • Tamperproof
Item#:
SHLD-BIT
Manufacturer Item:
SHLD-BIT
Manufacturer:
JB INDUSTRIES
JB Industries A31727-100 Brass Bulk-Head Access Fitting 1/4" Flare x 3/16" x 3/8" OD
Item#:
A31727-100
Manufacturer Item:
A31727
Manufacturer:
JB INDUSTRIES
Holyoke Fittings W2-48 Brass Gasket 3/4" Flare

Holyoke distributes fittings to the plumbing, heating, air-conditioning and refrigeration industries. It specializes in tube, hose and pipe fittings and also inventories some plumbing specialties. Holyoke's state of the art manufacturing facility and MRP system insures the highest industry fill rate and rapid order turn-around time.
Item#:
W2-48
Manufacturer Item:
B2-12
Manufacturer:
JB INDUSTRIES
JB Industries M17-22 Brass Multi-Step Access Fitting 1/4" Flare x 1/4"-3/8" OD
JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Our access fittings have generous counter bores to allow for the removal of the core if the flare becomes damaged. All tees and crosses are tapped to receive an access core in all 1/4" SAE flare ends. All pipe connections have internal braze cups for dip tube applications. All valves are equipped with cap and one valve core (braze type, loosely assembled). Temperature range -40 degrees to +250 degrees Fahrenheit (-40 to 121.1 degrees Celsius). Valve core is stainless steel and brass for use with all refrigerants including R-410A. Resistant to oils, alkalites, and diluted mineral acids.
Item#:
M17-22
Manufacturer Item:
A31724
Manufacturer:
JB INDUSTRIES
|◀ 13 - 24 of 174 ▶|
View: