Honeywell ARD14TZ

Honeywell ARD14TZ

• Features dual purpose mixing or diverting values
• Offers constant water temperature under changing operating conditions
• Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
• Designed to increase the amount of usable hot water
• Tamper-resistant design with nickel-plated brass construction and EPDM O-rings
• Designed for easy maintenance and Teflon coating prevents mineral build-up and extends life
• Lockable hand wheel for accurate temperature control
• Straight-through design (hot and cold at same level)
• Free thermostrip included to make temperature setting easy for one person to handle
• Teflon coated brass shuttle, EPDM rubber O-ring
• 1 year limited warranty
• Includes check valves on hot and cold port

Resideo Braukmann AM100-UT-1LF

Resideo Braukmann AM100-UT-1LF

Honeywell ARD12TZ

Honeywell ARD12TZ

• Features dual purpose mixing or diverting values
• Offers constant water temperature under changing operating conditions
• Temperature is limited at any point and if cold water supply is interrupted, flow reduction occurs in seconds
• Provides reliable performance at minimum flow of 5 gpm and proportional valve for simultaneous control of hot and cold
• Tamper-resistant design with nickel-plated brass construction and EPDM o-rings
• Designed for easy maintenance and Teflon coating prevents mineral build-up and extends life
• Teflon-coated shuttle, EPDM rubber o-ring

Resideo Braukmann AM100-US-1LF

Resideo Braukmann AM100-US-1LF

HONEYWELL AT175A1008

HONEYWELL AT150A1007

AT140A1042

HONEYWELL AT140A1018

HONEYWELL AT175F1023

HONEYWELL AT150F1022

HONEYWELL AT150F1030

On-off low Voltage valves consist of an actuator and valve assembly for controlling the flow of hot water
• Manual opener for valve operation on power failure, valve returns to automatic position when power is restored
• All models may be installed without disassembling the valve
• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
• 15 sec open time
• 18" lead electric connection
• Spring return to close valve action
• 50 VA pilot duty at 24 VAC , 4.4 amp running with 26.4 amp inrush at 120 VAC end switch rating
• NO SPST auxillary end switch
• Buna-N (NBR) rubber ball plug/ball/disc material
• EPDM rubber packing material
• Mounted in any position on a vertical line
  
  

  B163