The JADE economizer system is an expandable economizer control system, which includes a W7220 economizer module (controller) with an LCD and keypad. The W7220 can be configured for 4 different economizer strategies: referential or differential dry bulb, referential or differential enthalpy. The W7220 economizer module can be used as a standalone economizer module wired directly to a commercial set back space thermostat and sensors to provide Outdoor Air dry-bulb economizer control. The W7220 economizer module can be connected to optional sylk bus sensors for single or differential enthalpy control. The W7220 economizer module provides power and communications on the sylk bus for the sylk bus sensors. The W7220 economizer module automatically detects sensors by polling to determine which sensors are present. If a sensor loses communications after it has been detected, the W7220 economizer indicates a device fail error on the display or through the AUX 1 OUT terminal programmed to SYS.

,
,

Honeywell W7220A1000

Honeywell Home YERM5220R8321/U Programmable Equipment Remote Module with Thermostat, Up to 2 Heat/2 Cool Heat Pump or Conventional, 24 VAC

• The Honeywell Home ERM is like a new cordless tool in your toolbox, pull it out whenever it's too costly or time-consuming to run wires from a condensing unit or boiler to control devices
• There are fewer holes to drill and wires to run, just faster, easier installation that gives you more profit per job, make the Honeywell Home ERM your go-to choice for fast, easy equipment installation
• Eliminates the need to run additional wires to your equipment, for example during a heat pump upgrade
• Suitable for outdoor use
• Temperature sensor terminals for outdoor temp sensors or indoor freeze protection
• LED for easy installation checkout
• May reduce damage to homes since wiring/drilling is eliminated
• Attach the ERM to the wall near the compressor or boiler, the location should be at least 3 feet above ground and oriented with the 2-wire exits facing downward mounting
• ERM compressor, boiler connected LEDs

,
,

Honeywell YERM5220R8321

Honeywell Home W8150A1001 Fresh Air Ventilation Control,
,

Honeywell W8150A1001

Equipment Interface Module controls up to 4-stages of heat and 2-stages of cool in a heat pump system and up to 3-stages of heat and 2-stages of cool in a conventional system. Three sets of Universal IAQ contacts to control humidification, dehumidification, and ventilation. Four sensor inputs for wired sensors or dry contact devices.,
,

Honeywell YTHM5421R1010

Thermostat works standalone or with the THM5421R1021 Equipment Interface Module or with the TrueZONE Wireless Adapter.Smart Schedule - programs in seconds for any lifestyle.Patented interview based programming and installer setup.RedLINK wireless communication.Increase profit per job by including RedLINK accessories that provide comfort and convenience. RedLINK accessories include the RedLINK Internet Gateway, Portable Comfort Control (PCC), Wireless Outdoor Sensor, Wireless Indoor Sensor, Wireless Entry/Exit Remote, Wireless Vent and Filter Boost Remote, TrueSTEAM humidifier with Wireless Adapter and TrueZONE zoning panel with Wireless Adapter.

Selectable for residential and light commercial applications. Meets commercial code and is title 24 compliant.

Light commercial - commercial language (occupied and unoccupied), schedule holidays and custom events, remote setback, economizer and time of day. Remote Setback requires the

THM5421R1021 Equipment Interface Module.

Plain language setup, no manual needed.

Alerts and User Interactions Log - Keeps a searchable history of alerts and setting changes to the thermostat to determine if there is a system malfunction or if the issue was caused by a user error. Saves time in troubleshooting and points the technician in the right direction. The Alert and User Interaction Logs are viewable on a computer after you download them from the thermostat to a microSD card.

Customizable Service Reminders allow dealers to remind their customers when its time to call for service, when their warranty is expiring and to provide customized alerts.

MicroSD port for copying the Installer Setup, Customizable Reminders, Custom Events and Holidays to multiple thermostats.

MicroSD port for adding the dealer's contact information on the screen.

1 assignable output on the TH8321 model to control humidification, dehumidification, ventilation or a stage of heating/cooling.

3 assignable outputs on the Equipment Interface Module to control humidification, dehumidification, ventilation or a stage of heating/cooling. The TH8110 and TH8320 models require the use of a Wireless Indoor Sensor to control humidification and dehumidification.

1 assignable input can be used with a wired outdoor, indoor or discharge sensor.

4 assignable inputs on the Equipment Interface Module can be used with wired outdoor, indoor or discharge sensors, occupancy sensor for remote setback and dry contact devices to

trip pre-packaged or custom alerts such as a full drain pan or water leak.

Extend wireless range of the Equipment Interface Module by connecting a THM4000R1000

Wireless Adapter to the ABCD terminals.

Dual powered - battery or hardwired (C wire).

Precise temperature control (+/- 1° F) for reliable and consistent temperature.

Multiple staging options to provide comfort or energy savings.

TH8110R1008, TH8320R1003, and TH8321R1001 are ENERGY STAR Certified,
,

Honeywell YTH8321R1002

Honeywell Home YTH5320R1025 Wireless Zoning Adapter
,
,

Honeywell YTH5320R1025

Resideo Y8610U6006 Spark Ignition Retrofit Kit,
,

Honeywell Y8610U6006