Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ 997 - 1008 of 1200 ▶|
View:
  • Quiet performance (as low as 70 decibels)
  • Multi-speed blower motor for improved temperature and humidity control
  • Build to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • R-454B refrigerant continues our legacy of dedication to environmental stewardship. This refrigerant achieves a remarkable 75% reduction in global warming potential while preserving the non-ozone depleting properties of our previous refrigerant.
  • 3-Year No Hassle Replacement Limited Warranty+
  • 10-Year Parts Limited Warranty

    International Comfort Products PHB442000L000B

  • Item#:
    PHB442000L000B
    Manufacturer Item:
    PHB442000L000B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Quiet performance (as low as 70 decibels)
  • Multi-speed blower motor for improved temperature and humidity control
  • Build to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • R-454B refrigerant continues our legacy of dedication to environmental stewardship. This refrigerant achieves a remarkable 75% reduction in global warming potential while preserving the non-ozone depleting properties of our previous refrigerant.
  • 3-Year No Hassle Replacement Limited Warranty+
  • 10-Year Parts Limited Warranty

    International Comfort Products PHB436000L000B

  • Item#:
    PHB436000L000B
    Manufacturer Item:
    PHB436000L000B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • REFRIGERATION CIRCUIT
  • Environmentally balanced R- 410A refrigerant
  • Copper tube/aluminum fin condenser and evaporator coils
  • Scroll compressor standard on all models
  • Short- cycling protection for the compressor is built into the defrost control board
  • Dehumidification mode (airflow reduction) on all models
  • EASY TO INSTALL AND SERVICE
  • Installs easily on a rooftop or at ground level
  • Easy three- panel accessibility for maintenance and installation
  • Easily converts to down discharge applications
  • Combination electric heating and cooling

    International Comfort Products PHD460000H000K

  • Item#:
    PHD460000H000K
    Manufacturer Item:
    PHD460000H000K
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    REFRIGERATION CIRCUIT
  • Environmentally sound R410A refrigerant
  • Scroll compressor standard on all models
  • Copper tube/aluminum fin condenser and evaporator coils
  • Dehumidification mode (airflow reduction) on all models EASY TO INSTALL AND SERVICE
  • Installs easily on a rooftop or at ground level
  • Easy threepanel accessibility for maintenance and installation
  • Easily converts to down discharge applications
  • Combination gas heating, heat pump heating, and electric cooling
  • Low NOx units available BUILT TO LAST
  • Hail guard (3/8 spacing) wire grilles standard on PDS models (2 spacing wire grilles on PDD models)
  • Induceddraft combustion and venting
  • Prepainted steel cabinet
  • Aluminized steel tubular heat exchanger on PDD4 models, Stainless Steel tubular heat exchanger on PDS4 models
  • Direct spark ignition
  • High efficiency ECM indoor blower motor on all models
  • Vertical condenser fan discharge
  • Full perimeter steel base rails
  • High and low pressure switches provide added reliability for the compressor
  • PDS4 models come with tincoated copper evaporator coil standard

    PGD460115H000K

  • Item#:
    PGD460115H000K
    Manufacturer Item:
    PGD460115H000K
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • R-454B is the latest choice of refrigerant to help meet the 2025 GWP requirement. This unit is designed and tested with R-454B and contains a dissipation system.
  • EASY TO INSTALLThe units are lightweight, compact single package units that are easy to handle. Every size unit has an identical 32 by 51-in. (813 by 1295 mm) footprint to make job site planning simple. The efficient design uses less sheet metal and makes this unit lighter than competitive units. The unit can be easily positioned on the job site with the hand-holds built into the unit basepan. AERODYNAMIC FAN BLADE DESIGN reduces overall sound by up to 3dBA; as low as 70dBA.
  • SERVICE ACCESSThe units are designed to be serviced from both front and side. Routine maintenance tasks, such as coil cleaning, are sped up with the multiple side panels design.
  • CORROSION PROOF UNIT BASEThe unit features a tough, high-tech, single-piece composite material unit base with an integrated drain. The composite material eliminates the potential problem of rust and premature replacement which are common with standard metal pans. Each unit base is sloped to eliminate standing water. This feature minimizes the amount of standing water inside the unit, which limits mold and mildew growth.
  • DURABLE STEEL CABINETThe watertight construction and corrosion-resistant finish will keep it looking like new for years. A specialized paint treatment process ensures quality protection against the elements. A compact, low-profile design utilizes a louvered coil enclosure for maximum protection against hail damage and vandalism.
  • SCROLL COMPRESSORSEach unit comes standard with a scroll compressor. Each scroll compressor is hermetically sealed against contamination to help promote longer life and dependable operation. All scroll compressors have internal high-pressure and overcurrent protection.
  • COIL EFFICIENCYIndoor and outdoor coils are computer designed for optimum heat transfer and cooling efficiency. DEFROST SYSTEMThe system provides time/ temperature-based defrost cycles to maintain unit efficiency. This highly reliable system monitors coil temperature and initiates a defrost cycle only if it is required. The defrost cycle ends as soon as defrosting is complete.
  • ACCESSORY ELECTRIC HEATERSA variety of accessory electric heaters are available for these units. These heaters are comprised of a separate heater module mounted on the blower inlet and remote mounted controls located in the unit control box. Single point electrical connections are provided for powering both the heater and the unit.
  • START COLLARSStart collars are provided with each unit to provide easy connection to the structure ductwork.
  • DEPENDABLE COMPONENTSDirect-drive, multi-speed blower motor is standard on all models.
  • DIRECT-DRIVE, PSC OUTDOOR-FAN MOTORS are designed to help reduce energy consumption and provide for cooling operation down
  • Item#:
    PHM424000K000B
    Manufacturer Item:
    PHM424000K000B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Quiet performance (as low as 70 decibels)
  • Multi-speed blower motor for improved temperature and humidity control
  • Build to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • R-454B refrigerant continues our legacy of dedication to environmental stewardship. This refrigerant achieves a remarkable 75% reduction in global warming potential while preserving the non-ozone depleting properties of our previous refrigerant.
  • 3-Year No Hassle Replacement Limited Warranty+
  • 10-Year Parts Limited Warranty

    International Comfort Products PHB436000K000B

  • Item#:
    PHB436000K000B
    Manufacturer Item:
    PHB436000K000B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • R-454B is the latest choice of refrigerant to help meet the 2025 GWP requirement. This unit is designed and tested with R-454B and contains a dissipation system.
  • EASY TO INSTALLThe units are lightweight, compact single package units that are easy to handle. Every size unit has an identical 32 by 51-in. (813 by 1295 mm) footprint to make job site planning simple. The efficient design uses less sheet metal and makes this unit lighter than competitive units. The unit can be easily positioned on the job site with the hand-holds built into the unit basepan. AERODYNAMIC FAN BLADE DESIGN reduces overall sound by up to 3dBA; as low as 70dBA.
  • SERVICE ACCESSThe units are designed to be serviced from both front and side. Routine maintenance tasks, such as coil cleaning, are sped up with the multiple side panels design.
  • CORROSION PROOF UNIT BASEThe unit features a tough, high-tech, single-piece composite material unit base with an integrated drain. The composite material eliminates the potential problem of rust and premature replacement which are common with standard metal pans. Each unit base is sloped to eliminate standing water. This feature minimizes the amount of standing water inside the unit, which limits mold and mildew growth.
  • DURABLE STEEL CABINETThe watertight construction and corrosion-resistant finish will keep it looking like new for years. A specialized paint treatment process ensures quality protection against the elements. A compact, low-profile design utilizes a louvered coil enclosure for maximum protection against hail damage and vandalism.
  • SCROLL COMPRESSORSEach unit comes standard with a scroll compressor. Each scroll compressor is hermetically sealed against contamination to help promote longer life and dependable operation. All scroll compressors have internal high-pressure and overcurrent protection.
  • COIL EFFICIENCYIndoor and outdoor coils are computer designed for optimum heat transfer and cooling efficiency. DEFROST SYSTEMThe system provides time/ temperature-based defrost cycles to maintain unit efficiency. This highly reliable system monitors coil temperature and initiates a defrost cycle only if it is required. The defrost cycle ends as soon as defrosting is complete.
  • ACCESSORY ELECTRIC HEATERSA variety of accessory electric heaters are available for these units. These heaters are comprised of a separate heater module mounted on the blower inlet and remote mounted controls located in the unit control box. Single point electrical connections are provided for powering both the heater and the unit.
  • START COLLARSStart collars are provided with each unit to provide easy connection to the structure ductwork.
  • DEPENDABLE COMPONENTSDirect-drive, multi-speed blower motor is standard on all models.
  • DIRECT-DRIVE, PSC OUTDOOR-FAN MOTORS are designed to help reduce energy consumption and provide for cooling operation down
  • Item#:
    PHM436000K000B
    Manufacturer Item:
    PHM436000K000B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single-stage cooling capacity control on 072 models
  • Two-stage/two circuit cooling capacity control on 090-180 models
  • Two-stage/single circuit cooling capacity control on 089, 100, 119 models
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed refrigerant metering system
  • Fully insulated cabinet
  • Cooling operating range from 40°F up to 115°F
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Standard belt drive, constant torque motor
  • Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
  • Field Convertible from vertical to horizontal airflow configuration on all models. No special kit required on 072-150 models.
  • Field accessory supply duct kit required for 180 size models only.
  • Provisions for thru-the-bottom power entry capability
  • Single point electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Scroll compressors with internal line-break overload protection Copper tube, aluminum fin coils
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Permanently lubricated, totally enclosed condenser-fan motors
  • Low pressure, freeze protection, and high-pressure switches
  • Liquid line filter drier standard

    International Comfort Products Commercial RAS119H0CA0AAA

  • Item#:
    RAS119H0CA0AAA
    Manufacturer Item:
    RAS119H0CA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single-stage cooling capacity control on 072 models
  • Two-stage/two circuit cooling capacity control on 090-180 models
  • Two-stage/single circuit cooling capacity control on 089, 100, 119 models
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed refrigerant metering system
  • Fully insulated cabinet
  • Cooling operating range from 40°F up to 115°F
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Standard belt drive, constant torque motor
  • Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
  • Field Convertible from vertical to horizontal airflow configuration on all models. No special kit required on 072-150 models.
  • Field accessory supply duct kit required for 180 size models only.
  • Provisions for thru-the-bottom power entry capability
  • Single point electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Scroll compressors with internal line-break overload protection Copper tube, aluminum fin coils
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Permanently lubricated, totally enclosed condenser-fan motors
  • Low pressure, freeze protection, and high-pressure switches
  • Liquid line filter drier standard

    International Comfort Products Commercial RAV060L0EA0AAA

  • Item#:
    RAV060L0EA0AAA
    Manufacturer Item:
    RAV060L0EA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single-stage cooling capacity control on 072 models
  • Two-stage/two circuit cooling capacity control on 090-180 models
  • Two-stage/single circuit cooling capacity control on 089, 100, 119 models
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed refrigerant metering system
  • Fully insulated cabinet
  • Cooling operating range from 40°F up to 115°F
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Standard belt drive, constant torque motor
  • Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
  • Field Convertible from vertical to horizontal airflow configuration on all models. No special kit required on 072-150 models.
  • Field accessory supply duct kit required for 180 size models only.
  • Provisions for thru-the-bottom power entry capability
  • Single point electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Scroll compressors with internal line-break overload protection Copper tube, aluminum fin coils
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Permanently lubricated, totally enclosed condenser-fan motors
  • Low pressure, freeze protection, and high-pressure switches
  • Liquid line filter drier standard

    International Comfort Products Commercial RAV120L02A0AAA

  • Item#:
    RAV120L02A0AAA
    Manufacturer Item:
    RAV120L02A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single-stage cooling capacity control on 072 models
  • Two-stage/two circuit cooling capacity control on 090-180 models
  • Two-stage/single circuit cooling capacity control on 089, 100, 119 models
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed refrigerant metering system
  • Fully insulated cabinet
  • Cooling operating range from 40°F up to 115°F
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Standard belt drive, constant torque motor
  • Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
  • Field Convertible from vertical to horizontal airflow configuration on all models. No special kit required on 072-150 models.
  • Field accessory supply duct kit required for 180 size models only.
  • Provisions for thru-the-bottom power entry capability
  • Single point electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Scroll compressors with internal line-break overload protection Copper tube, aluminum fin coils
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Permanently lubricated, totally enclosed condenser-fan motors
  • Low pressure, freeze protection, and high-pressure switches
  • Liquid line filter drier standard

    International Comfort Products Commercial RAV180H02A0AAA

  • Item#:
    RAV180H02A0AAA
    Manufacturer Item:
    RAV180H02A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single-stage cooling capacity control on 072 models
  • Two-stage/two circuit cooling capacity control on 090-180 models
  • Two-stage/single circuit cooling capacity control on 089, 100, 119 models
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fixed refrigerant metering system
  • Fully insulated cabinet
  • Cooling operating range from 40°F up to 115°F
  • Access panels with easy grip handles and no-strip screw feature
  • Two-inch disposable return air filters
  • Tool-less filter access door
  • Standard belt drive, constant torque motor
  • Advanced terminal board for simple safety circuit troubleshooting and control box arrangement
  • Field Convertible from vertical to horizontal airflow configuration on all models. No special kit required on 072-150 models.
  • Field accessory supply duct kit required for 180 size models only.
  • Provisions for thru-the-bottom power entry capability
  • Single point electric connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Scroll compressors with internal line-break overload protection Copper tube, aluminum fin coils
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Permanently lubricated, totally enclosed condenser-fan motors
  • Low pressure, freeze protection, and high-pressure switches
  • Liquid line filter drier standard

    International Comfort Products Commercial RAV060H0FA0AAA

  • Item#:
    RAV060H0FA0AAA
    Manufacturer Item:
    RAV060H0FA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    |◀ 997 - 1008 of 1200 ▶|
    View: