Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 949 - 960 of 1371 ▶ ▶|
View:

Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
    • Item#:
    N92MSN0601412A
    Manufacturer Item:
    N92MSN0601412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    Up to 92% Standard NOX Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Singlestage gas valve and fixedspeeds, constant torque ECM
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOX emissions requirement.
  • Flame rollout sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosionresistant, prepainted steel cabinet
    • Item#:
    N92ESN0601714A
    Manufacturer Item:
    N92ESN0601714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92ESN-Care_Misc
    N92ESN_Install
    N92ESN_Spec

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 14-3/16" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
    • Item#:
    N80MSN0451412A
    Manufacturer Item:
    N80MSN0451412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    95% Standard NOX Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 96% AFUE in upflow and horizontal positions up to 95% AFUE in downflow position
  • FixedSpeeds, Constant Torque ECM blower motor
  • Supports singlestage cooling units
  • Insulated heat exchanger compartment
  • Approved for Twinning application (0601714 through 1002120) with accessory (order separately)
  • Approved for Manufactured Housing/Mobile Home applications (0401410 through 1202422) with accessory (order separately)
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
    • Item#:
    N95ESN0801716A
    Manufacturer Item:
    N95ESN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N95ESN-Care_Misc
    N95ESN_Install
    N95ESN_Spec

    Air Conditioning Condensing Unit 1-Stage 5 Ton 15 SEER R454B

    Efficiency
  • 13.8 - 17.0 SEER2 / 11.2  14.5 EER2
  • Indoor air quality accessories available
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-ozone depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
    Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
    • Item#:
    N5A5S60CKAWA
    Manufacturer Item:
    N5A5S60CKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5A5S-Series_Spec

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
    • Item#:
    N92MSN0401712A
    Manufacturer Item:
    N92MSN0401712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    Package Residential A/C Unit 5 Ton 60K BTU 208/230/1 13.4 SEER R454B

    Durability and Reliability
    With its tin-coated copper evaporator coil, it is durable enough to withstand general wear-and-tear. Moreover, the unit also has safety switches to prevent damage from malfunctions, as well as the base has integrated full perimeter steel base rails to further secure the unit in place. Along with other system features, these give you the peace of mind that this system can be relied upon when you need it most.
  • Installation and Maintenance
    It can be installed on your roof or next to your home, as it has two outlet options that can be used. For easy service access, there are multiple control panels and maintenance access panels to make sure you can fix your unit should the need arise.
  • The Warranty is covered by a standard 10-year parts warranty, as well as an exceptional 5-year no hassle replacement warranty, giving you the peace of mind that if you have a problem, they have a plan.
    • Item#:
    PAM460000K000B
    Manufacturer Item:
    PAM460000K000B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    PAM4_SPEC

    Air Conditioning Condensing Unit 3 Ton 18 SEER 2 Stage 230/1 R454B

    DESIGNED TO FIT YOUR HOME - AND YOUR BUDGET Tempstar has real solutions for your home cooling needs. Our selection of air conditioners have been designed to fit virtually any home and a variety of budgets. From our innovative variable speed Ion Series Air Conditioner Systems with SmartSense Technology...to Performance Series two-stage and single-stage choices, our air conditioners offer summertime comfort you can depend on.
  • Two-stage with high-stage at 100% capacity and low-stage at 75% capacity
  • Sound Level 69 dBA
  • Small Footprint 31" x 31" x 35"
  • Cabinet Design Solid, durable sheet metal construction with baked-on powder paint to protect again dings, dents and weather-based threats. Dense wire grille to protect the coil.
    • Item#:
    N5A8T36CKAWA
    Manufacturer Item:
    N5A8T36CKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5A8T36CKAWA_Spec

    ICP Heat Pump Condensing Unit 2 Ton 14.3 SEER 1 Stage 230/1 R454B

    Efficiency
  • 13.8 - 17.0 SEER2 / 11.2  14.5 EER2
  • Indoor air quality accessories available
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-ozone depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
    Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
    • Item#:
    N5H5S24CKAAA
    Manufacturer Item:
    N5H5S24CKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5H5S-Series-ICP_Spec
    N5H5S_SPEC

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
    • Item#:
    N80MSN0702116A
    Manufacturer Item:
    N80MSN0702116A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 17-1/2" x 29 D

    Quiet performance
  • Variable 25-speed constant torque blower motor and single-stage gas valve also provide enhanced levels of temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving
  • heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • 10-Year Parts Limited Warranty upon timely registration
  • 20-Year Heat Exchanger Limited Warranty
    • Item#:
    N80VSL0701716B
    Manufacturer Item:
    N80VSL0701716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80VSL-ICP-Care_Misc
    N80VSL-ICP_Install

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 24-1/2" W x 29" D

  • Flame roll-out sensors standard
  • 24 VAC humidifier terminal and electronic air cleaner terminal
  • Certified to leak 2% or less of nominal air conditioning CFM delivered when pressurized to 1" water gauge with all present air inlets, air outlets and condensate drain port(s) sealed
  • Tougher - ECM blower motor, adjustable heating blower off delay, factory set blower on delay, RPJ aluminized steel heat exchanger, high temperature limit control prevents overheating, direct ignition with silicon nitride igniter, 1-piece preprinted steel cabinet
  • Quieter - in-shot burners, insulated blower compartment
  • Innovative knobs for easy door removal and secure attachment
  • Through the casing flue pipe for counterflow or horizontal applications with accessory
  • 4-position - upflow/downflow/horizontal installation
  • 3-position inducer elbow capability
  • Masonry chimney adapter available
  • Self diagnostics
  • Slide out blower assembly
  • ECM blower motor
  • 20 years heat exchanger and 10 years parts limited warranty with timely registration, 5 years parts limited warranty if not registered within 90 days of original installation
  • 4.5 - 13.6" WC inlet gas pressure
  • Low NOX>
    • Item#:
    N8MXL1352420A
    Manufacturer Item:
    N8MXL1352420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N8MXL1352420A-Care_Misc
    N8MXL1352420A_Install
    N8MXL1352420A_Spec
    |◀ ◀ 949 - 960 of 1371 ▶ ▶|
    View: