Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 901 - 912 of 1371 ▶ ▶|
View:

Package Residential Heat Pump/Dual Fuel 5 Ton 115K BTU 230/1 R454B 14 SEER

REFRIGERATION CIRCUIT
  • Environmentally sound R410A refrigerant
  • Scroll compressor standard on all models
  • Copper tube/aluminum fin condenser and evaporator coils
  • Dehumidification mode (airflow reduction) on all models EASY TO INSTALL AND SERVICE
  • Installs easily on a rooftop or at ground level
  • Easy threepanel accessibility for maintenance and installation
  • Easily converts to down discharge applications
  • Combination gas heating, heat pump heating, and electric cooling
  • Low NOx units available BUILT TO LAST
  • Hail guard (3/8 spacing) wire grilles standard on PDS models (2 spacing wire grilles on PDD models)
  • Induceddraft combustion and venting
  • Prepainted steel cabinet
  • Aluminized steel tubular heat exchanger on PDD4 models, Stainless Steel tubular heat exchanger on PDS4 models
  • Direct spark ignition
  • High efficiency ECM indoor blower motor on all models
  • Vertical condenser fan discharge
  • Full perimeter steel base rails
  • High and low pressure switches provide added reliability for the compressor
  • PDS4 models come with tincoated copper evaporator coil standard
    • Item#:
    PDD460115K000K
    Manufacturer Item:
    PDD460115K000K
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 24-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
    • Item#:
    N80MSN1102420A
    Manufacturer Item:
    N80MSN1102420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    Air Conditioning Condensing Unit 1-Stage 5 Ton 15 SEER R454B

    Efficiency
  • 13.8 - 17.0 SEER2 / 11.2  14.5 EER2
  • Indoor air quality accessories available
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-ozone depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
    Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
    • Item#:
    N5A5S60AKAWA
    Manufacturer Item:
    N5A5S60AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5A5S-Series_Spec

    Air Conditioning Condensing Unit 3 Ton 18 SEER 2 Stage 230/1 R454B

    DESIGNED TO FIT YOUR HOME - AND YOUR BUDGET Tempstar has real solutions for your home cooling needs. Our selection of air conditioners have been designed to fit virtually any home and a variety of budgets. From our innovative variable speed Ion Series Air Conditioner Systems with SmartSense Technology...to Performance Series two-stage and single-stage choices, our air conditioners offer summertime comfort you can depend on.
  • Two-stage with high-stage at 100% capacity and low-stage at 75% capacity
  • Sound Level 69 dBA
  • Small Footprint 31" x 31" x 35"
  • Cabinet Design Solid, durable sheet metal construction with baked-on powder paint to protect again dings, dents and weather-based threats. Dense wire grille to protect the coil.
    • Item#:
    N5A8T36AKAWA
    Manufacturer Item:
    N5A8T36AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5A8T36AKAWA_Spec

    Air Conditioning Condensing Unit 5 Ton 13.4 SEER 2 Stage R454B

    Efficiency
  • 13.4 - 16.0 SEER2 / 11.0  13.5 EER2
  • Indoor air quality accessories available Comfort
  • System supports programmable or standard thermostat controls Reliability
  • Non-ozone depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier Durability
    Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard Applications
  • Longline  up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.4 m) evaporator above condenser (See Long Line Guide for more information.)
  • Low ambient cooling (down to 0°F / -18°C ) with approved low ambient accessory kits.
    • Item#:
    N5A4S60AKANA
    Manufacturer Item:
    N5A4S60AKANA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5A4S_SPEC

    80% Standard NOX Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet
    • Item#:
    N80ESN0701716A
    Manufacturer Item:
    N80ESN0701716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN0701716A_Spec

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
    • Item#:
    N92MSN1002120A
    Manufacturer Item:
    N92MSN1002120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    Package Residential A/C Unit 4 Ton 115K BTU 208/230/1 13.4 SEER R454B

    Features/Benefits
  • One-piece heating and cooling units with low sound levels, easy installation, low maintenance, and dependable performance.
  • R-454B is the latest choice of refrigerant to help meet the 2025 GWP requirement. This unit is designed and tested with R-454B and contains a dissipation system.
  • Easy Installation.
  • Factory-assembled package is a compact, fully self-contained, combination gas heating/electric heating and cooling unit that is prewired, pre-piped, and pre-charged for minimum installation expense. These units are available in a variety of standard and optional heating/ cooling size combinations with voltage options to meet residential and light commercial requirements. Units are lightweight and install easily on a rooftop or at ground level. The high tech composite base eliminates rust problems associated with ground level applications. Innovative Unit Base Design
  • On the inside a high-tech composite material will not rust and incorporates a sloped drain pan which improves drainage and helps inhibit mold, algae and bacterial growth. On the outside metal base rails provide added stability as well as easier handling and rigging.
    Convertible Duct Configuration
  • Unit is designed for use in either downflow or horizontal applications.
  • Each unit is converted from horizontal to downflow and includes horizontal duct covers. Downflow operation is provided in the field to allow vertical ductwork connections. The basepan seals on the bottom openings to ensure a positive seal in the vertical airflow mode.
  • Energy-saving, direct spark ignition saves gas by operating only when the room thermostat calls for heating. Standard units are furnished with natural gas controls. A low-cost field installed kit for propane conversion is available for all units.
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement. Durable, dependable components
  • Scroll Compressors are designed for high efficiency. Each compressor is hermetically sealed against contamination to help promote longer life and dependable operation. Each compressor also has vibration isolation to provide quieter operation. All compressors have internal high pressure and overcurrent protection.
  • Monoport inshot burners produce precise air-to-gas mixture, which provides for clean and efficient combustion. The large monoport on the inshot (or injection type) burners seldom, if ever, requires cleaning. All gas furnace components are accessible in one compartment.
  • Turbo-tubular heat exchangers are constructed of stainless steel for corrosion resistance and optimum heat transfer for improved efficiency. The tubular design permits hot gases to make multiple passes across the path of the supply air.
  • In addition, dimples located on the heat exchanger walls force the hot gases to stay in close contact with the walls, improving heat transfer. ECM Motor is standard on all models.
  • Direct-drive, PSC (Permanent Split Capacitor) condenser-fan motors are designed to help reduce energy consumption and provide for cooling operation down to 40°F (4.4°C) outdoor temperature. Low ambient kit is available as a field installed accessory.
  • Refrigerant system is designed to provide dependability. Liquid filter driers are used to promote clean, unrestricted operation. Each unit leaves the factory with non-ozone depleting and low global warming potential R-454B refrigerant charge. Refrigerant service connections make checking operating pressures easier. Factory-installed leak detection dissipation system for added safety High and Low Pressure Switches provide added reliability for the compressor.
  • Indoor and Outdoor coils are computer-designed for optimum heat transfer and efficiency. The indoor coil is fabricated from aluminum indoor coils and aluminum fins and is located inside the unit for protection against damage. The outdoor coil is internally mounted on the top tier of the unit
    • Item#:
    PDB448115K000B
    Manufacturer Item:
    PDB448115K000B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    PDB4_SPEC
    PGB4-Owners-Maniual-Misc

    80% Standard NOX Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet
    • Item#:
    N80ESN1102120A
    Manufacturer Item:
    N80ESN1102120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN1102120A_Spec

    ICP Heat Pump Condensing Unit 1-Stage

    Efficiency
  • 13.8 - 17.0 SEER2 / 11.2  14.5 EER2
  • Indoor air quality accessories available
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-ozone depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
    Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
    • Item#:
    N5H5S60AKAAA
    Manufacturer Item:
    N5H5S60AKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5H5S-Series-ICP_Spec

    Air Conditioning Condensing Unit 5 Ton 18 SEER 2 Stage 230/1 R454B

    DESIGNED TO FIT YOUR HOME - AND YOUR BUDGET Tempstar has real solutions for your home cooling needs. Our selection of air conditioners have been designed to fit virtually any home and a variety of budgets. From our innovative variable speed Ion Series Air Conditioner Systems with SmartSense Technology...to Performance Series two-stage and single-stage choices, our air conditioners offer summertime comfort you can depend on.
  • Two-stage with high-stage at 100% capacity and low-stage at 75% capacity
  • Sound Level 69 dBA
  • Small Footprint 31" x 31" x 35"
  • Cabinet Design Solid, durable sheet metal construction with baked-on powder paint to protect again dings, dents and weather-based threats. Dense wire grille to protect the coil.
    • Item#:
    N5A8T60CKAWA
    Manufacturer Item:
    N5A8T60CKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5A8T60CKAWA_Spec

    Package Roof Top Unit 3 Ton 36K BTU 13.4 SEER 230/1

  • Refrigerant R410A
  • SEER 13.4
  • Low Sound level
  • Dense Wire Condenser Grille Cover
  • Cabinet Air Lerakage less then 2%

    • Item#:
    PAD436000K000K
    Manufacturer Item:
    PAD436000K000K
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    PAD436000K000K_Install
    PAD436000K000K_Spec
    |◀ ◀ 901 - 912 of 1371 ▶ ▶|
    View: