S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation.
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric heating and cooling unit that is
prewired, pre-piped, and pre-charged for minimum installation expense.
These units are available in a variety of standard and optional heating/
cooling size combinations with voltage options to meet residential and
light commercial requirements. Units are lightweight and install easily
on a rooftop or at ground level. The high tech composite base eliminates
rust problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible Duct Configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units are designed for California installations and meet 40
ng/J NOx emissions. Can be installed in air quality management districts
with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Scroll Compressors are designed for high efficiency. Each compressor
is hermetically sealed against contamination to help promote longer life
and dependable operation. Each compressor also has vibration isolation
to provide quieter operation. All compressors have internal high pressure
and overcurrent protection.
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive, PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooling operation down to 40°F (4.4°C) outdoor temperature. Low
ambient kit is available as a field installed accessory.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-ozone depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety
High and Low Pressure Switches provide added reliability for the
compressor.
Indoor and Outdoor coils are computer-designed for optimum heat
transfer and efficiency. The indoor coil is fabricated from aluminum
indoor coils and aluminum fins and is located inside the unit for
protection against damage. The outdoor coil is internally mounted on the
top tier of the unit
Convertible Duct Configuration
Item#:
PDB430060K000B
Manufacturer Item:
PDB430060K000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired, pre-piped,
and pre-charged for minimum installation expense. These units are
available in a variety of standard and optional heating/ cooling size
combinations with voltage options to meet residential and light
commercial requirements. Units are lightweight and install easily on a
rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes two
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal
Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel
Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooing operation down to 40°F (4.4°C) outdoor temperature.
Motormaster® II low ambient kit is available as a field-installed
accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate
thermostat without anti-short cycle protection is used the Time Guard II
field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-ozone depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Item#:
PGB442060H000B
Manufacturer Item:
PGB442060H000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
PGD436090KTP0G
Item#:
PGD436090KTP0G
Manufacturer Item:
PGD436090KTP0G
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired, pre-piped,
and pre-charged for minimum installation expense. These units are
available in a variety of standard and optional heating/ cooling size
combinations with voltage options to meet residential and light
commercial requirements. Units are lightweight and install easily on a
rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes two
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal
Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel
Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooing operation down to 40°F (4.4°C) outdoor temperature.
Motormaster® II low ambient kit is available as a field-installed
accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate
thermostat without anti-short cycle protection is used the Time Guard II
field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-ozone depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Item#:
PGB460115H001B
Manufacturer Item:
PGB460115H001B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired, pre-piped,
and pre-charged for minimum installation expense. These units are
available in a variety of standard and optional heating/ cooling size
combinations with voltage options to meet residential and light
commercial requirements. Units are lightweight and install easily on a
rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes two
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal
Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel
Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooing operation down to 40°F (4.4°C) outdoor temperature.
Motormaster® II low ambient kit is available as a field-installed
accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate
thermostat without anti-short cycle protection is used the Time Guard II
field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-ozone depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Item#:
PGB436060L001B
Manufacturer Item:
PGB436060L001B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
International Comfort Products Fast Parts OCA24 Adapter for EPD/ExM/EPM/ExD and EED"J22" Series Cased Coil
- #8-18 x 1/2" screw
OCA24
Item#:
OCA24
Manufacturer Item:
OCA24
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired, pre-piped,
and pre-charged for minimum installation expense. These units are
available in a variety of standard and optional heating/ cooling size
combinations with voltage options to meet residential and light
commercial requirements. Units are lightweight and install easily on a
rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes two
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal
Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel
Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooing operation down to 40°F (4.4°C) outdoor temperature.
Motormaster® II low ambient kit is available as a field-installed
accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate
thermostat without anti-short cycle protection is used the Time Guard II
field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-ozone depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Item#:
PGB460115H000B
Manufacturer Item:
PGB460115H000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired, pre-piped,
and pre-charged for minimum installation expense. These units are
available in a variety of standard and optional heating/ cooling size
combinations with voltage options to meet residential and light
commercial requirements. Units are lightweight and install easily on a
rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes two
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal
Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel
Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooing operation down to 40°F (4.4°C) outdoor temperature.
Motormaster® II low ambient kit is available as a field-installed
accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate
thermostat without anti-short cycle protection is used the Time Guard II
field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-ozone depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Item#:
PGB436060L000B
Manufacturer Item:
PGB436060L000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired, pre-piped,
and pre-charged for minimum installation expense. These units are
available in a variety of standard and optional heating/ cooling size
combinations with voltage options to meet residential and light
commercial requirements. Units are lightweight and install easily on a
rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes two
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal
Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel
Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooing operation down to 40°F (4.4°C) outdoor temperature.
Motormaster® II low ambient kit is available as a field-installed
accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate
thermostat without anti-short cycle protection is used the Time Guard II
field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-oz.one depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
PGB430060K000B
Item#:
PGB430060K000B
Manufacturer Item:
PGB430060K000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired, pre-piped,
and pre-charged for minimum installation expense. These units are
available in a variety of standard and optional heating/ cooling size
combinations with voltage options to meet residential and light
commercial requirements. Units are lightweight and install easily on a
rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes two
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal
Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel
Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooing operation down to 40°F (4.4°C) outdoor temperature.
Motormaster® II low ambient kit is available as a field-installed
accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate
thermostat without anti-short cycle protection is used the Time Guard II
field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-ozone depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Item#:
PGB460130L000B
Manufacturer Item:
PGB460130L000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features/Benefits
One-piece heating and cooling units with low sound levels, easy
installation, low maintenance, and dependable performance.
R-454B is the latest choice of refrigerant to help meet the 2025 GWP
requirement. This unit is designed and tested with R-454B and contains
a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained,
combination gas heating/electric cooling unit that is prewired, pre-piped,
and pre-charged for minimum installation expense. These units are
available in a variety of standard and optional heating/ cooling size
combinations with voltage options to meet residential and light
commercial requirements. Units are lightweight and install easily on a
rooftop or at ground level. The high tech composite base eliminates rust
problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and
incorporates a sloped drain pan which improves drainage and helps
inhibit mold, algae and bacterial growth. On the outside metal base rails
provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications.
Each unit is converted from horizontal to downflow and includes two
horizontal duct covers. Downflow operation is provided in the field to
allow vertical ductwork connections. The basepan seals on the bottom
openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal
Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel
Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when
the room thermostat calls for heating. Standard units are furnished with
natural gas controls. A low-cost field installed kit for propane
conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air
quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which
provides for clean and efficient combustion. The large monoport on the
inshot (or injection type) burners seldom, if ever, requires cleaning. All
gas furnace components are accessible in one compartment.
Turbo-tubular heat exchangers are constructed of stainless steel for
corrosion resistance and optimum heat transfer for improved efficiency.
The tubular design permits hot gases to make multiple passes across the
path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot
gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan
motors are designed to help reduce energy consumption and provide for
cooing operation down to 40°F (4.4°C) outdoor temperature.
Motormaster® II low ambient kit is available as a field-installed
accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate
thermostat without anti-short cycle protection is used the Time Guard II
field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter
driers are used to promote clean, unrestricted operation. Each unit leaves
the factory with non-ozone depleting and low global warming potential
R-454B refrigerant charge. Refrigerant service connections make
checking operating pressures easier. Factory-installed leak detection
dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Item#:
PGB436090K001B
Manufacturer Item:
PGB436090K001B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Durability and Reliability
With its tin-coated copper evaporator coil, it is durable enough to withstand general wear-and-tear. Moreover, the unit also has safety switches to prevent damage from malfunctions, as well as the base has integrated full perimeter steel base rails to further secure the unit in place. Along with other system features, these give you the peace of mind that this system can be relied upon when you need it most.Installation and Maintenance
It can be installed on your roof or next to your home, as it has two outlet options that can be used. For easy service access, there are multiple control panels and maintenance access panels to make sure you can fix your unit should the need arise.
The Warranty is covered by a standard 10-year parts warranty, as well as an exceptional 5-year no hassle replacement warranty, giving you the peace of mind that if you have a problem, they have a plan.
With its tin-coated copper evaporator coil, it is durable enough to withstand general wear-and-tear. Moreover, the unit also has safety switches to prevent damage from malfunctions, as well as the base has integrated full perimeter steel base rails to further secure the unit in place. Along with other system features, these give you the peace of mind that this system can be relied upon when you need it most.
It can be installed on your roof or next to your home, as it has two outlet options that can be used. For easy service access, there are multiple control panels and maintenance access panels to make sure you can fix your unit should the need arise.
Item#:
PAM436000K000B
Manufacturer Item:
PAM436000K000B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS