Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 673 - 684 of 985 ▶ ▶|
View:

80% Standard NOX Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet

    International Comfort Products N80ESN0701712A

    • Item#:
    N80ESN0701712A
    Manufacturer Item:
    N80ESN0701712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN0701712A_Spec

    80% Standard NOX Gas Heating Furnace 33-1/3" H x 24-1/2" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet

    International Comfort Products N80ESN1352420A

    • Item#:
    N80ESN1352420A
    Manufacturer Item:
    N80ESN1352420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN1352420A_Spec

    Air Conditioning Condensing Unit 1.5 Ton 13.4 SEER 2 Stage R454B Filter Drier Scroll Compressor

  • Efficiency 13.4 - 16.0 SEER2 / 11.0-13.5 EER2
  • Indoor air quality accessories available Comfort
  • System supports programmable or standard thermostat controls Reliability
  • Non-ozone depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload Filter drier Durability Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard Applications
  • Long line up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.4 m) evaporator above condenser (See Long Line Guide for more information.)
  • Low ambient cooling (down to 0°F / -18°C ) with approved low ambient accessory kits.

    International Comfort Products N5A4S18AKANA

    • Item#:
    N5A4S18AKANA
    Manufacturer Item:
    N5A4S18AKANA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5A4S_SPEC

    96% Direct Vent 2-Pipe Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartmen
    t
  • All sizes can be installed in air quality management districts with a 40 ng/J
  • NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422, 1402422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products N96MSN0802120A

    • Item#:
    N96MSN0802120A
    Manufacturer Item:
    N96MSN0802120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96MSN-Care_Misc
    N96MSN_Install

    Air Conditioning Condensing Unit 4 Ton 18 SEER 2 Stage 230/1 R454B

  • Efficiency 13.4 - 16.0 SEER2 / 11.0-13.5 EER2
  • Indoor air quality accessories available
  • System supports programmable or standard thermostat controls
  • Non-ozone depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
  • Solid, durable sheet metal construction
  • Dense wire coil guard

    International Comfort Products N5A8T48AKAWA

    • Item#:
    N5A8T48AKAWA
    Manufacturer Item:
    N5A8T48AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5A8T48AKAWA_Spec

    Air Conditioning Condensing Unit 1-Stage 1.5 Ton 15 SEER

  • Efficiency 13.4 - 16.0 SEER2 / 11.0-13.5 EER2
  • Indoor air quality accessories available
  • System supports programmable or standard thermostat controls
  • Non-ozone depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
  • Solid, durable sheet metal construction
  • Dense wire coil guard

    International Comfort Products N5A5S18AKAWA

    • Item#:
    N5A5S18AKAWA
    Manufacturer Item:
    N5A5S18AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5A5S-Series_Spec

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN0901714A

    • Item#:
    N80MSN0901714A
    Manufacturer Item:
    N80MSN0901714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    96% Gas Heating Furnace

  • Up to 97.0% AFUE in upflow and horizontal positions, 95% AFUE in downflow position
  • Variable-speed, constant torque ECM blower motor
  • Supports single-stage and two-stage cooling units
  • Dehumidification feature in cooling
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
  • Cabinet air leakage less than 2.0%
    at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Control of continuous fan speed from a compatible thermostat

    International Comfort Products N96VSN0601716B

    • Item#:
    N96VSN0601716B
    Manufacturer Item:
    N96VSN0601716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96VSN0601716B_Spec

    Air Conditioning Condensing Unit 2 Ton 18 SEER 2 Stage 230/1 R454B

    Efficiency
  • 13.8 - 17.0 SEER2 / 11.2  14.5 EER2
  • Indoor air quality accessories available
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-oz.one depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
    Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
    • Item#:
    N5A8T24AKAWA
    Manufacturer Item:
    N5A8T24AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5A8T24AKAWA_Spec

    96% Direct Vent 2-Pipe Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartmen
    t
  • All sizes can be installed in air quality management districts with a 40 ng/J
  • NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422, 1402422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products N96MSN0801716A

    • Item#:
    N96MSN0801716A
    Manufacturer Item:
    N96MSN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96MSN-Care_Misc
    N96MSN_Install

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 24-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN1102420A

    • Item#:
    N80MSN1102420A
    Manufacturer Item:
    N80MSN1102420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    Air Conditioning Condensing Unit 1-Stage 5 Ton 15 SEER R454B

  • Efficiency 13.4 - 16.0 SEER2 / 11.0-13.5 EER2
  • Indoor air quality accessories available
  • System supports programmable or standard thermostat controls
  • Non-ozone depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
  • Solid, durable sheet metal construction
  • Dense wire coil guard

    International Comfort Products N5A5S60AKAWA

    • Item#:
    N5A5S60AKAWA
    Manufacturer Item:
    N5A5S60AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5A5S-Series_Spec
    |◀ ◀ 673 - 684 of 985 ▶ ▶|
    View: