Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 445 - 456 of 986 ▶ ▶|
View:

Electric Strip Heater 208/230/1 9 KW Non-Fused

International Comfort Products EHC09BKCN Electric Strip Heater 9 KW 230/1 VAC

International Comfort Products EHC09BKCN

Item#:
EHC09BKCN
Manufacturer Item:
EHC09BKCN
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
 
EHC-Heater_Install

Evaporator Coil Cased 5 Ton W/Power-V Technology Upflow/Downflow 21" R454B

  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV.
  • All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 2100 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating application.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.
  • All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation

    International Comfort Products EVD5X60M21A

    • Item#:
    EVD5X60M21A
    Manufacturer Item:
    EVD5X60M21A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVD5X_SPEC

    Electric Strip Heater 208/230/1 9 KW

    Internatinoal Comfort Products EHC09AKCN Electric Heater Kit, 208 - 230 volt, 9 kw, 1 PH, 60 Hz
    • Field convertible to 3 PH
    ,

    International Comfort Products EHC09AKCN

    Item#:
    EHC09AKCN
    Manufacturer Item:
    EHC09AKCN
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EHC-Heater_Install

    Evaporator Coil Cased 5 Ton W/Power-V Technology Upflow/Downflow 24" R454B

  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV.
  • All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 2100 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating application.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.
  • All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation

    International Comfort Products EVD5X60M24A

    • Item#:
    EVD5X60M24A
    Manufacturer Item:
    EVD5X60M24A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVD5X_SPEC

    Electric Heater 7.5 KW

    International Comfort Products Fast Heating Parts EHK308B Electric Heater 7.5 KW

      International Comfort Products Fast Heating Parts EHK308B

    Item#:
    EHK308B
    Manufacturer Item:
    EHK308B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Electric Strip Heater 208/230/1 15 KW W/Breaker 47,100 BTU

    International Comfort Products EHC20BKB Electric Strip Heater 208/230/1 15 KW W/Breaker 47,100 BTU

    International Comfort Products EHC20BKB

    Item#:
    EHC20BKB
    Manufacturer Item:
    EHC20BKB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EHC-Heater_Install

    Air Handler 15 Ton 460/3 R454B

    International Comfort Products FAL180H1AA2AUA

    Item#:
    FAL180H1AA2AUA
    Manufacturer Item:
    FAL180H1AA2AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Air Handler 10 Ton 460/3 R454B

    International Comfort Products FAL120H2AA0AUA

    Item#:
    FAL120H2AA0AUA
    Manufacturer Item:
    FAL120H2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Air Handler 6 Ton Dual Circuit 230/3 CFM 2250-3750 4'-8" L x 2'-4" H x 3'-6-3/4" D

    Multi-position design for horizontal or vertical installation without modification
  • Two sloped condensate pans on each unit for horizontal or vertical applications
  • Standard sloped drain pans and cleanable insulation treatedwith Environmental Protection
    Agency (EPA) registered antimicrobial agent improves indoor air quality
  • High-static design meets a wider range of applications thancompetitive packaged air handler lines
  • Ultra low leak economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities
  • Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120-336 sizes
  • Dual circuit can be field modified for use on single circuit condensers
  • Cooling coils with mechanically bonded fins provide peak heat transfer
  • Optional 2-speed indoor fan with VFD controller
  • Standard factory-installed thermostatic expansion valve (TXV) with removable power element
  • Easy maintenance - removal of single panel allows access to virtually all components
  • Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available
  • 24-volt terminal block for control wiring connection
  • Hot water coil, steam coil, and electric heat accessories are available

    International Comfort Products FAS072HAAA2A0A

    • Item#:
    FAS072HAAA2A0A
    Manufacturer Item:
    FAS072HAAA2A0A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FAS072HAAA2A0A_Spec

    Evaporator Coil Cased Multi-Positional 2 Ton W/Power-V Technology 17-1/2" R454B

  • Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
  • All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube once the pipe swages are cut offto accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating applications.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

    International Comfort Products EVM5X25M17A

    • Item#:
    EVM5X25M17A
    Manufacturer Item:
    EVM5X25M17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVM5X_SPEC

    Air Handler 7-1/2 Ton 460/3 R454B

    International Comfort Products FAL091H2AA0AUA

    Item#:
    FAL091H2AA0AUA
    Manufacturer Item:
    FAL091H2AA0AUA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Evaporator Coil Cased Multi-Positional Cased 4 Ton W/Power-V Technology 21" R454B

  • Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
  • All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube once the pipe swages are cut offto accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating applications.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

    International Comfort Products EVM5X48M21A

    • Item#:
    EVM5X48M21A
    Manufacturer Item:
    EVM5X48M21A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVM5X_SPEC
    |◀ ◀ 445 - 456 of 986 ▶ ▶|
    View: