Evaporator Coil Cased 1.5 Ton W/Power-V Technology Upflow/Downflow 14" R454B

The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.

The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV.

All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.

Meets or exceeds burst pressure of 2100 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating application.

This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation

International Comfort Products EVD4X61M21A

Item#:

EVD5X18M14A

Manufacturer Item:

EVD5X18M14A

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

EVD5X_SPEC

Electric Strip Heater 208/230/1 15 KW W/Breaker 47,100 BTU

International Comfort Products EHC15BKB Electric Strip Heater 208/230/1 15 KW W/Breaker 47,100 BTU

International Comfort Products EHC15BKB

Item#:

EHC15BKB

Manufacturer Item:

EHC15BKB

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

EHC-Heater_Install

Electric Heater 5 KW

International Comfort Products Fast Heating Parts EHK05AKB Electric Heater 5 KW

International Comfort Products Fast Heating Parts EHK05AKB

Item#:

EHK05AKB

Manufacturer Item:

EHK05AKB

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

Electric Heater 5 KW

International Comfort Products Fast Heating Parts EHK05AKN Electric Heater 5 KW

International Comfort Products Fast Heating Parts EHK05AKN

Item#:

EHK05AKN

Manufacturer Item:

EHK05AKN

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

Evaporator Coi Cased Multi-Positional Cased 2.5 Ton W/Power-V Technology 17-1/2" R454B

Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.

All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.

The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.

The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube once the pipe swages are cut offto accommodate braze-less compression fittings.

Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating applications.

This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

International Comfort Products EVM5X31M17A

Item#:

EVM5X32M17A

Manufacturer Item:

EVM5X32M17A

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

EVM5X_SPEC

Evaporator Coil Cased 2.5 Ton W/Power-V Technology Upflow/Downflow 17" R454B

The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.

The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV.

All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.

Meets or exceeds burst pressure of 2100 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating application.

This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation

International Comfort Products EVD5X30M17A

Item#:

EVD5X31M17A

Manufacturer Item:

EVD5X31M17A

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

EVD5X_SPEC

Evaporator Coil Uncased Upflow/Downflow W/TXV 3 Ton R410A Aluminum

Tin Coated Copper Tube Upflow/Downflow (Vertical) Uncased N Evaporator Coil with TXV Metering,

Copper tube/aluminum fin"N" coil with latest high - tech fin design
Bolt on TXV metering device factory installed on all models
(2) condensate drain connections
5 years limited parts warranty
Sweat refrigerant line connection
All coils 2-slab"A" configuration, lanced sine wave bare aluminum fin
Aluminum hairpin
Sales digit (major revision)
International Comfort Products ENA4X30L17

Item#:

ENA4X36L21

Manufacturer Item:

ENA4X36L21A

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

ENA4X-END4X_Spec

ENA4X-ICP_Spec

Evaporator Coil Cased 3 Ton W/Power-V Technology Upflow/Downflow 17-1/2" R454B

The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.

The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV.

All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.

Meets or exceeds burst pressure of 2100 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating application.

This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation

International Comfort Products EVD5X36M21A

Item#:

EVD5X38M17A

Manufacturer Item:

EVD5X38M17A

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

Evaporator Coil Cased Multi-Positional 2 Ton W/Power-V Technology 14" R454B

Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.

All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.

The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.

The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections.

Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube once the pipe swages are cut offto accommodate braze-less compression fittings.

Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating applications.

This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights.

Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

Item#:

EVM5X24M14A

Manufacturer Item:

EVM5X24M14A

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

EVM5X_SPEC

Evaporator Coil Uncased Upflow/Downflow W/TXV 5 Ton R410A Aluminum

Tin Coated Copper Tube Upflow/Downflow (Vertical) Uncased N Evaporator Coil with TXV Metering,

Copper tube/aluminum fin"N" coil with latest high - tech fin design
Bolt on TXV metering device factory installed on all models
(2) condensate drain connections
5 years limited parts warranty
Sweat refrigerant line connection
All coils 2-slab"A" configuration, lanced sine wave bare aluminum fin
Aluminum hairpin
Sales digit (major revision)
International Comfort Products ENA4X36L21

Item#:

ENA4X60L24

Manufacturer Item:

ENA4X60L24A

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

ENA4X-END4X_Spec

ENA4X-ICP_Spec

Evaporator Coil Cased 2.5 Ton W/Power-V Technology Upflow/Downflow 14" R454B

The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.

The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV.

All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.

Meets or exceeds burst pressure of 2100 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating application.

This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.

All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation

International Comfort Products EVD5X24M14A

Item#:

EVD5X30M14A

Manufacturer Item:

EVD5X30M14A

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

EVD5X_SPEC

Evaporator Coil Cased 2-1/2 Ton W/Power-V Technology Multipoise