Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 397 - 408 of 986 ▶ ▶|
View:

Electric Strip Heater 208/230/1 5 KW No Breaker 15,700 BTU

International Comfort Products EHC05CKN Electric Strip Heater 208/230/1 5 KW No Breaker 15,700 BTU,
,

International Comfort Products EHC05CKN

Item#:
EHC05CKN
Manufacturer Item:
EHC05CKN
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
 
EHC-Heater_Install

Electric Strip Heater 208/230/1 5 KW W/Breaker 15,700 BTU

International Comfort Products EHC05CKB Electric Strip Heater Kit 5 KW

International Comfort Products EHC05CKB

Item#:
EHC05CKB
Manufacturer Item:
EHC05CKB
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
 
EHC05CKB_Install

Evaporator Coil Cased Mult-Position A-Coil 3 Ton R410A >>LIMITED STOCK CLEARANCE ITEM<<

ALL MODELS:
  • 11/2 thru 5 Tons
  • Copper tube / aluminum fin A coil with latest hightech fin design
  • Bolton TXV metering device factory installed on all models (equalizer tube brazed in)
  • TXV and manifold positioned to the side for easier cleaning
  • Innovative drain pan design for complete water removal
  • Two condensate drain connections (EDM has additional two for horizontal installation)
  • 2piece delta plate for easier removal and cleaning CASED COILS
  • Upflow cabinet widths and horizontal cabinet depths match flush with ICP gas furnaces
  • Removable front access panel
  • Easy slideout coil for inspection
  • Hemmed flanges for safer handling
  • Foil faced insulation
  • Nonsweat cabinet, even at extreme conditions
  • Cabinets meet or exceed 2% air leakage codes
  • Sturdy, 22 gauge, prepainted steel cabinet EDM
  • Multiposition installation  upflow, downflow, or horizontal
  • Available for R410A (EDM tincoated available for R22 systems)
  • Two UV light knockouts provided on cabinet
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection EDD
  • Upflow or downflow installation
  • Available for R410A
  • Two UV light knockouts provided on cabinet
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection UNCASED ACOILS
    EDA
  • Upflow or downflow installation
  • Available for R410A systems
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection

    International Comfort Products EDM4X36FAL

    • Item#:
    EDM4X36FAL
    Manufacturer Item:
    EDM4X36FAL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EDM4X-ICP_Spec

    Evaporator Coil Cased 2 Ton W/Power-V Technology Upflow/Downflow 17-1/2" R454B

  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV.
  • All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 2100 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating application.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.
  • All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation

    International Comfort Products EVD5X24M17A

    • Item#:
    EVD5X24M17A
    Manufacturer Item:
    EVD5X24M17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVD5X_SPEC

    Evaporator Coil Cased 2.5 Ton W/Power-V Technology Upflow/Downflow 17" R454B

  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV.
  • All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 2100 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating application.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.
  • All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation

    International Comfort Products EVD5X30M17A

    • Item#:
    EVD5X30M17A
    Manufacturer Item:
    EVD5X30M17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVD5X_SPEC

    Evaporator Coil Cased Upflow/Downflow W/TXV 2.5 Ton R410A Aluminum

  • Tin Coated Copper Tube Upflow/Downflow (Vertical) Uncased N Evaporator Coil with TXV Metering,
    • Copper tube/aluminum fin"N" coil with latest high - tech fin design
    • Bolt on TXV metering device factory installed on all models
    • (2) condensate drain connections
    • 5 years limited parts warranty
    • Sweat refrigerant line connection
    • All coils 2-slab"A" configuration, lanced sine wave bare aluminum fin
    • Aluminum hairpin
    • Sales digit (major revision)

      International Comfort Products END4X30L14

    • Item#:
    END4X30L14
    Manufacturer Item:
    END4X30L14A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    ENA4X-END4X_Spec

    Evaporator Coil Cased 3.5 Ton W/Power-V Technology Upflow/Downflow 21" R454B

  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV.
  • All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 2100 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating application.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.
  • All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation

    International Comfort Products EVD5X42M21A

    • Item#:
    EVD5X42M21A
    Manufacturer Item:
    EVD5X42M21A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVD5X_SPEC

    Evaporator Coil Cased 3 Ton W/Power-V Technology Upflow/Downflow 21" R454B

  • The corrosion-resistant drain pan is designed of a Polybutylene terephthalate material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
  • The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections. Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV.
  • All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.
  • Meets or exceeds burst pressure of 2100 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating application.
  • This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights. Comes with a no delta plate for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.
  • All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation

    International Comfort Products EVD5X36M21A

    • Item#:
    EVD5X36M21A
    Manufacturer Item:
    EVD5X36M21A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EVD5X_SPEC

    Evaporator Coil Cased Mult-Position A-Coil 4 Ton R410A >>LIMITED STOCK CLEARANCE ITEM<<

    ALL MODELS:
  • 11/2 thru 5 Tons
  • Copper tube / aluminum fin A coil with latest hightech fin design
  • Bolton TXV metering device factory installed on all models (equalizer tube brazed in)
  • TXV and manifold positioned to the side for easier cleaning
  • Innovative drain pan design for complete water removal
  • Two condensate drain connections (EDM has additional two for horizontal installation)
  • 2piece delta plate for easier removal and cleaning CASED COILS
  • Upflow cabinet widths and horizontal cabinet depths match flush with ICP gas furnaces
  • Removable front access panel
  • Easy slideout coil for inspection
  • Hemmed flanges for safer handling
  • Foil faced insulation
  • Nonsweat cabinet, even at extreme conditions
  • Cabinets meet or exceed 2% air leakage codes
  • Sturdy, 22 gauge, prepainted steel cabinet EDM
  • Multiposition installation  upflow, downflow, or horizontal
  • Available for R410A (EDM tincoated available for R22 systems)
  • Two UV light knockouts provided on cabinet
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection EDD
  • Upflow or downflow installation
  • Available for R410A
  • Two UV light knockouts provided on cabinet
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection UNCASED ACOILS
    EDA
  • Upflow or downflow installation
  • Available for R410A systems
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection

    International Comfort Products EDM4X48L

    • Item#:
    EDM4X48L
    Manufacturer Item:
    EDM4X48LAL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EDM4X-ICP_Spec

    Evaporator Coil Cased Upflow/Downflow W/TXV 3.5 Ton R410A Aluminum

  • Tin Coated Copper Tube Upflow/Downflow (Vertical) Uncased N Evaporator Coil with TXV Metering,
    • Copper tube/aluminum fin"N" coil with latest high - tech fin design
    • Bolt on TXV metering device factory installed on all models
    • (2) condensate drain connections
    • 5 years limited parts warranty
    • Sweat refrigerant line connection
    • All coils 2-slab"A" configuration, lanced sine wave bare aluminum fin
    • Aluminum hairpin
    • Sales digit (major revision)

      International Comfort Products END4X42L21

    • Item#:
    END4X42L21
    Manufacturer Item:
    END4X42L21A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    ENA4X-END4X_Spec

    Evaporator Coil Cased Upflow/Downflow W/TXV 3.5 Ton R410A Aluminum

  • Tin Coated Copper Tube Upflow/Downflow (Vertical) Uncased N Evaporator Coil with TXV Metering,
    • Copper tube/aluminum fin"N" coil with latest high - tech fin design
    • Bolt on TXV metering device factory installed on all models
    • (2) condensate drain connections
    • 5 years limited parts warranty
    • Sweat refrigerant line connection
    • All coils 2-slab"A" configuration, lanced sine wave bare aluminum fin
    • Aluminum hairpin
    • Sales digit (major revision)

      International Comfort Products END4X42L17

    • Item#:
    END4X42L17
    Manufacturer Item:
    END4X42L17A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    ENA4X-END4X_Spec

    Electric Strip Heater 208/230/1 15 KW Non-Fused

    International Comfort Products EHC15BHN Electric Strip Heater 15 KW 230/1 VAC

    International Comfort Products EHC15BHN

    Item#:
    EHC15BHN
    Manufacturer Item:
    EHC15BHN
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    EHC-Heater_Install
    |◀ ◀ 397 - 408 of 986 ▶ ▶|
    View: