S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
Hart & Cooley 050850 Grille 22" x 10" W/Bar
050850
Item#:
050850
Manufacturer Item:
050850
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 054117-10 Radial Damper 10"
Hart & Cooley 054117-10
Item#:
054117-10
Manufacturer Item:
054117-10
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 2000153 Smart filter seal is a durable yet flexible high-strength film designed to fit tightly over the air filter slot on the return air plenum and prevent air from bypassing the filter and thus improve indoor air quality. Magnets surrounding the perimeter hold it tight against the plenum to prevent air leakage. It can be easily removed to change out dirty air filters and replaced again. The 2009 edition of the International Energy Conservation Code (IECC), section 403.2.2 states,"sealing all ducts, air handlers, filter boxes, and building cavities used as ducts shall be sealed." The smart filter seal fulfills that requirement. Both the U.S. Department of energy and energy star recommend sealing the furnace slot.
Hart & Cooley 2000153
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
3REA60
Item#:
3REA60
Manufacturer Item:
011395
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
Hart & Cooley 3RP3
Item#:
3RP3
Manufacturer Item:
016003
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
3RRA
Item#:
3RRA
Manufacturer Item:
018996
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
Hart & Cooley 3RF
Item#:
3RF
Manufacturer Item:
016019
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
Hart & Cooley 3RPA
Item#:
3RPA
Manufacturer Item:
016008
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
3RT3
Item#:
3RT3
Manufacturer Item:
016011
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
3RDH
Item#:
3RDH
Manufacturer Item:
016018
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
Hart & Cooley 3RS
Item#:
3RS
Manufacturer Item:
016021
Manufacturer:
HART & COOLEY, LLC.
Hart & Cooley 0.012" Aluminum Inner and 0.018" G90 Galvanized Steel
- Deep locking groove assures solid joint and secure lock
- Corrosion resistant aluminum inner wall for rapid warm-up
- Unique locking band provides 360 deg turning radius of the pipe and fittings
- Locking band slides over tabs easily, locks firmly without twisting
- Locking tabs hold pipe securely together, can be easily unlocked
- Positive stop provides proper alignment and positive fit for mating end of pipe or fitting
- Reinforced ends curled bead on end of outer pipe for rigidity and strength
- The allowable minimum clearance to combustibles is 1"
- A full set of installation instructions are supplied with caps and supports Hart & Cooley 10RP3 B-Vent Pipe 10" x 36" Natural Gas Aluminum Inner & Galvanized Steel Outer,
Hart & Cooley 3RN4
Item#:
3RN4
Manufacturer Item:
016013
Manufacturer:
HART & COOLEY, LLC.
