Home  > EMERSON-SWAN INC(x)
View:
The SuperStor ultra storage tanks are manufactured with long lasting, quality 316L stainless steel construction. This durable material resists corrosion and eliminates the need for anode rods. These tanks are laser welded with the most advance automated welding techniques to allow for more precise welding, providing a concentrated heat source. The SSU storage tanks have 2" thick environmentally safe foam insulation, reducing standby losses and increasing efficiency. The aesthetically pleasing and durable silver plastic jacket ensures a rustproof finish, even in moist environments.
  • Tank constructed of type 316L stainless steel for tolerance of high temperatures and superior corrosion resistance
  • Insulated with approximately 2" of environmentally safe, CFC free, water-blown, extra thick foam insulation
  • Allows less than 1/2 deg F per hr heat loss
  • Outer shell constructed of silver finished durable plastic for rust and impact resistance
  • NPT stainless steel inlet and outlet domestic connections for all models side tappings
  • Temperature and pressure relief valve port
  • Stainless steel control well for accurate current temperature measurement inside vessel
Item#:
CBU45
Manufacturer Item:
CBU45
Manufacturer:
EMERSON-SWAN INC
Item#:
62077
Manufacturer Item:
62077
Manufacturer:
EMERSON-SWAN INC
HTP 7350P-020 Boiler Spark Gap Ignitor for 80M/140M/199M Munchkin Boilers
  • Generates the electric spark that begins combustion within many HTP boilers
Item#:
7350P-020
Manufacturer Item:
7350P-020
Manufacturer:
EMERSON-SWAN INC
Item#:
7450P-026
Manufacturer Item:
7450P-026
Manufacturer:
EMERSON-SWAN INC
Part of the Keen Home smart zoning system. Monitor the temperature and humidity of any room in your home. Temp Sensors work together with smart vents to control individual room temperature by allowing you to set specific temperature goals using the Keen Home app.
Item#:
KH-TS
Manufacturer Item:
KH-TS
Manufacturer:
EMERSON-SWAN INC
Smiths Profile series fan convectors (PSU) are slim, attractive surface mounted units with a base skirt which allows them to be wall mounted or floor mounted. All units feature a two position max-off-min switch with internal aquastat for individual heater control. A BTU/hr range from 3000 BTU/hr - 40000 BTU/hr gives a fast, efficient way to heat a room while using a minimum of wall space. A pleasing neutral light grey paint finish is ideal for many decors. This high grade finish may be used as is or may be field painted, wall papered or marbleized.
  • Constructed of an internal heatpack section mounted to a well designed back chassis
  • A highly efficient, headered coil, made of copper tubes expanded into smooth aluminum plate fins (10 FPI), tested at 300 psi, and sealed for quality heat exchanger
  • The heat exchanger is positioned in each PSU unit for maximum heat transfer over the coil
  • High spec tangential EBM fan and motor assembly consists of high static fan wheel and scroll, detachable motor, replaceable easy glide sleeve bearings fan and motor assembly
  • All PSU units have integral two speed, maximum to minimum, and switches
  • Supply and return connections are 3/4" sweat connections located on the left hand side of the unit as you face the grille water connection
  • A water vent with wide convenient screwdriver slot is accessible on the left of the unit underneath the cover
  • Quiet, efficient operation
  • Three position fan switch for maximum control
  • Features the e-z hanger mounting bracket
Item#:
PSU-30
Manufacturer Item:
PSU-30
Manufacturer:
EMERSON-SWAN INC
Item#:
UFS-050T
Manufacturer Item:
UFS-050T
Manufacturer:
EMERSON-SWAN INC
Smith'S Environmental Products Quiet-One KS2008 Brown Zinc-Coated Steel Hydronic Toe Kickspace Heater, 10020 BTU/hr at 210 deg F, 120 VAC Kickspace Heaters from Smiths Environmental Products are designed to provide a unique yet purposeful solution to those "hard-to-heat" areas. With 4-sizes to choose from, the Quiet-One 2000 Series offers great flexibility and units can be matched more precisely to the demands of the job site. The Quiet-One 2000 offers high BTU output at low decibel levels. Maximum BTU output from a small footprint is the hallmark of the Quiet-One 2000 products. This ensures maximum utilization of floor and wall space in such rooms as kitchens and baths where space is at a premium.
  • 4-sizes for increased diversity as well as more effective sizing from job to job
  • Small and compact, will fit in most tight spaces or hard to heat areas, just use your imagination
  • Highly efficient, provides enhanced energy savings, increased heat transfer capability and ensures quiet reliable delivery of comfort
  • Whisper quiet, low noise, low vibration fan system with easy glide bearings, along with the famous coanda component means quiet comfort delivered time after time after time
  • Highly efficient header type coil, fully oriented to the air stream, this coil arrangement has proven its high capacity BTU/hr yield with quick heat up response under all kinds of certified conditions
  • Installer friendly, the friendliest in the industry, no need to screw our 2000 series to the floor as it comes with integral antislip antivibration floor mountings
  • Water vent is accessible through the front grille for ease of bleeding
  • Quality product with an, all new, 5 years warranty
  • The grille and exposed parts of the chassis are painted with a copper/brown baked enamel finish
  • Heat exchanger - a highly efficient, headered coil, made of copper tubes expanded into smooth aluminum plate fins (10 fins/Inch), tested at 300 psi and sealed for quality
  • High spec tangential SEL fan and motor assembly consists of high static fan wheel and scroll, detachable motor, replaceable easy glide sleeve bearings and the fan and motor cut out are protected to UL/CSA specifications
  • The KS units have integral 2-speed, max-off-min, fan switches, the LTC - low limit aquastat is also a high spec item with a close tolerance designed to close on a rise to 130 deg F and open at 110 deg F
  • 3-speed switch, 1-piece chassis, removable grill and can be converted to a wall heater
  • 650 BTU/feet at 14.5 linear feet Kickspace Heaters from Smiths Environmental Products are designed to provide a unique yet purposeful solution to those "hard-to-heat" areas. With 4-sizes to choose from, the Quiet-One 2000 Series offers great flexibility and units can be matched more precisely to the demands of the job site. The Quiet-One 2000 offers high BTU output at low decibel levels. Maximum BTU output from a small footprint is the hallmark of the Quiet-One 2000 products. This ensures maximum utilization of floor and wall space in such rooms as kitchens and baths where space is at a premium.
Item#:
KS2008
Manufacturer Item:
KS2008
Manufacturer:
EMERSON-SWAN INC
Item#:
59903
Manufacturer Item:
59903
Manufacturer:
EMERSON-SWAN INC
Kickspace Heaters from Smiths Environmental Products are designed to provide a unique yet purposeful solution to those "hard-to-heat" areas. With 4-sizes to choose from, the Quiet-One 2000 Series offers great flexibility and units can be matched more precisely to the demands of the job site. The Quiet-One 2000 offers high BTU output at low decibel levels. Maximum BTU output from a small footprint is the hallmark of the Quiet-One 2000 products. This ensures maximum utilization of floor and wall space in such rooms as kitchens and baths where space is at a premium.
  • 4-sizes for increased diversity as well as more effective sizing from job to job
  • Small and compact, will fit in most tight spaces or hard to heat areas, just use your imagination
  • Highly efficient, provides enhanced energy savings, increased heat transfer capability and ensures quiet reliable delivery of comfort
  • Whisper quiet, low noise, low vibration fan system with easy glide bearings, along with the famous coanda component means quiet comfort delivered time after time after time
  • Highly efficient header type coil, fully oriented to the air stream, this coil arrangement has proven its high capacity BTU/hr yield with quick heat up response under all kinds of certified conditions
  • Installer friendly, the friendliest in the industry, no need to screw our 2000 series to the floor as it comes with integral antislip antivibration floor mountings
  • Water vent is accessible through the front grille for ease of bleeding
  • Quality product with an, all new, 5 years warranty
  • The grille and exposed parts of the chassis are painted with a copper/brown baked enamel finish
  • Heat exchanger - a highly efficient, headered coil, made of copper tubes expanded into smooth aluminum plate fins (10 fins/Inch), tested at 300 psi and sealed for quality
  • High spec tangential SEL fan and motor assembly consists of high static fan wheel and scroll, detachable motor, replaceable easy glide sleeve bearings and the fan and motor cut out are protected to UL/CSA specifications
  • The KS units have integral 2-speed, max-off-min, fan switches, the LTC - low limit aquastat is also a high spec item with a close tolerance designed to close on a rise to 130 deg F and open at 110 deg F
  • 3-speed switch, 1-piece chassis, removable grill and can be converted to a wall heater
  • 650 BTU/feet at 6.97 linear feet
Item#:
KS2004
Manufacturer Item:
KS2004
Manufacturer:
EMERSON-SWAN INC
The SuperStor Ultra indirect water heat is a culmination of over 30 years of indirect system manufacturing experience. The 316L stainless steel tank resists corrosion and eliminates the need for anode rods, allowing for the system to be virtually maintenance free. The heater draws energy from a boiler and thus does not need its own heat source. Hot boiler water flows through an internal heat exchanger in the tank, heating the domestic water. The SuperStor boasts three to five times more recovery than conventional gas-fired or electric water heaters.
  • Stainless steel internal bent hot water outlet tube
  • Attractive silver finish cover that resists dents and corrosion
  • High output finned cupronickel heat exchanger provides maximum efficiency 11 fins per"
  • 316L stainless steel tank for high temperatures and corrosion resistance
  • Environmentally safe, CFC free water blown, 2" thick foam insulation allows less than 1/2 deg F heat loss per hour
  • Immersion type stainless steel control well
Item#:
SSU80
Manufacturer Item:
SSU-80
Manufacturer:
EMERSON-SWAN INC
Fernox TF1 Glass Fiber Reinforced Nylon Plastic Inline Total Filter, 50
Item#:
60003
Manufacturer Item:
60003
Manufacturer:
EMERSON-SWAN INC
View: