S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
Diversitech SGC-12 Big Shot Gun Cartidge Refill,
Diversitech PF-16
Diversitech Designed for use on 3/4 in PVC condensate drain line. Snaps easily over existing drain line tubing and can be glued in place using PVC cement. The SOS electronically senses water near the inside wall of the PVC drain tubing. By locating the SOS with its body away from the normal flow, it can be used to detect a possible overflow condition when the PVC drain line becomes full with water. Like a culvert, the condensate drain line is normally mostly empty with a small amount of water flowing in the lower parts of the horizontal run. Since the sensor component of the SOS only covers part of the tubing, a low volume of flowing water does not activate the switch. The pipe must be full or near full to activate the switch. Mount SOS horizontally, vertically, or at any angle. Works with 24 VAC control circuits and typical contactors. When not detecting water, the SOS is normally closed and allows normal air conditioner operation. When water approaches the SOS's sensor, the switch triggers, and the control circuit is opened. The LED indicator lights to show that there may be system trouble, and the SOS is doing its job. Includes press to test switch. Furnished complete with switch, 5 feet (1.5 m) 18 AWG, 2 wire lead, and a 3/4" PVC male fitting adapter for direct coupling to a primary pan drain line connection. Now available with Push to Test button.Sid Harvey Item #:SOS-1: Replaces Part #:'s : 32964,
,
,
Diversitech SOS-1
MMF ST75 A/C Easy Tee Service Tool Kit With 3 Fittings, Domestic
Mitco P129
Item#:
TUV-APCOX-MAG15-ER3
Manufacturer Item:
TUV-APCOX-MAG15-ER3
Manufacturer:
DIVERSITECH CORP.
Item#:
TUV-APCOX-MAG15-ST3
Manufacturer Item:
TUV-APCOX-MAG15-ST3
Manufacturer:
DIVERSITECH CORP.
Diversitech TT-24 Tattle Tale 24 VAC/VDC (3 Pack)
Identifies open controls in seconds. A single use monitoring device for determining which, safety control has opened in response to a malfunction. Saves wasted hours tracing a safety control shutdown, even if intermittent. A quick, inexpensive way to visually spot where the problem is. Simply install in parallel with each safety control. When a control opens, the red indicator flag pops up. You will know immediately which area of the system is experiencing problems. Disposable, safe, simple to use, and pocket sized. Monitors safety controls, fuses, overload relays, motor Protectors, freeze controls, limit controls, safety switches, fusible links, or steam control.,
,
Identifies open controls in seconds. A single use monitoring device for determining which, safety control has opened in response to a malfunction. Saves wasted hours tracing a safety control shutdown, even if intermittent. A quick, inexpensive way to visually spot where the problem is. Simply install in parallel with each safety control. When a control opens, the red indicator flag pops up. You will know immediately which area of the system is experiencing problems. Disposable, safe, simple to use, and pocket sized. Monitors safety controls, fuses, overload relays, motor Protectors, freeze controls, limit controls, safety switches, fusible links, or steam control.,
,
Diversitech TT-24
Triatomic Environmental TUV-APCOx-SI3-P Fresh Aire System UV Duct Mounted,
,
,
Triatomic TUV-APCOX-SI3-P
Item#:
TUV-APCOX-SI3-P
Manufacturer Item:
TUV-APCOX-SI3-P
Manufacturer:
DIVERSITECH CORP.
Diversitech T645-20 Nylon 6-Piece Fin Comb Set 8 - 14 Fins Per Inch
Conveniently straightens and cleans condenser and evaporator fins. Each nylon head slides into the master handle and tightens in place. Heads are designed to fit units with fin spacing of 4-24 fins per". Each head is engraved with its own size and is color coded for fast identification. Heads are angled so that when inserted in the handle, the hand is a safe distance from the sharp fins. Heads may also be reversed in the handle so that combing with an upward stroke (recommended method) may be done easily with proper leverage. The master handle rests comfortably in a man-size grip, is rigid and long lasting.
,
Conveniently straightens and cleans condenser and evaporator fins. Each nylon head slides into the master handle and tightens in place. Heads are designed to fit units with fin spacing of 4-24 fins per". Each head is engraved with its own size and is color coded for fast identification. Heads are angled so that when inserted in the handle, the hand is a safe distance from the sharp fins. Heads may also be reversed in the handle so that combing with an upward stroke (recommended method) may be done easily with proper leverage. The master handle rests comfortably in a man-size grip, is rigid and long lasting.
- (1) handle and (6) 8, 9, 10, 11, 12, 14 heads
,
Fujitsu A/C Parts UTP-AX180A
Diversitech SuperComb T-418 Nylon Fin Tool, Red, 25/Case
Henry Technologies T645-9
Item#:
T645-9
Manufacturer Item:
T-418
Manufacturer:
DIVERSITECH CORP.
Diversitech SuperComb T-417 Nylon Fin Tool, Lime, 25/Case
Diversitech T645-8
Item#:
T645-8
Manufacturer Item:
T-417
Manufacturer:
DIVERSITECH CORP.
Diversitech SuperComb T-412 Nylon Fin Tool, 7-1/2" L x 2-1/4" W, 2-1/4" W, Green, 25/Case
Diversitech T644-50
Item#:
T645-7
Manufacturer Item:
T-412
Manufacturer:
DIVERSITECH CORP.
Diversitech ULTRACP-22 Condensate Pump 22" Lift 120 VAC W/O Tubing
