Nu-Calgon 4155-01 Injector Hose Kit,

Nu-Calgon 4155-01

Cal-Blast is a high performance aerosol with excellent solvency and blasting spray, to powerfully separate undesirable materials from the surface, offering maximum cleaning of finned coils. Cal-Blast condenser coil cleaner quickly dissolves those stubborn, resistive deposits and oils that are found to plug coils, particularly those located in kitchens. It contains a quick drying solvent with a pleasant scent. The high dielectric strength and non-flammable formula in Cal-Blast is great for most applications and will not short out electrical equipment.

• No rinse required high solvency cleaning power that evaporates completely
• Most effective on coils found in kitchens
• Quick drying leaves no residue
• Pleasant citrus scent
• Works great on all soils
• Contains no ozone depleters

Nu-Calgon 4132-20

A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil. The A/C EasySeal circulates through the system with the refrigerant seeking out leaks rather than migrating slowly with the oil keeping in mind that only a small portion of the system oil actually migrates with the refrigerant through the system. A/C EasySeal will react with moisture or air that is naturally present at a leak, forming a secure seal. A/C EasySeal is compatible with the refrigerant, oil and all system materials and it will not react until it comes into contact with the air and moisture at the leak, forming a permanent seal. A/C EasySeal is a time saver. It finds leaks quickly and seals them, saving the time and money required in searching for the smallest leaks. With A/C EasySeal, the contractor is able to just add a can to the system and be confident the leak has been fixed and move on to the next job.Sid Harvey Item #:4050-02: Replaces Part #:'s : 39782,
,

Nu-Calgon 4050-02

A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil. The A/C EasySeal circulates through the system with the refrigerant seeking out leaks rather than migrating slowly with the oil keeping in mind that only a small portion of the system oil actually migrates with the refrigerant through the system. A/C EasySeal will react with moisture or air that is naturally present at a leak, forming a secure seal. A/C EasySeal is compatible with the refrigerant, oil and all system materials and it will not react until it comes into contact with the air and moisture at the leak, forming a permanent seal. A/C EasySeal is a time saver. It finds leaks quickly and seals them, saving the time and money required in searching for the smallest leaks. With A/C EasySeal, the contractor is able to just add a can to the system and be confident the leak has been fixed and move on to the next job.

• Treats fractional to 1.5 Ton
• Prevents refrigerant leaks and seals existing leaks in air conditioning and refrigeration systems permanently
• Eliminates expensive leak search and repair
• Travels with refrigerant to find leaks fast
• Utilizes a reusable hose

,
,

Nu-Calgon 4050-01

Nu-Calgon EasySeal 4050-08 Direct Inject Refrigerant Leak Sealant, Clear EasySeal direct inject is the strongest sealant on the market, with over a million leaks sealed. With this new injection system, pumping down the unit is a thing of the past. And now the industry's leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal direct inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of the UV Leak Detection Kit (4050-15).,
,

Nu-Calgon 4050-08

EasySeal direct inject is a new generation of sealants. Its patent pending injection method makes it easier to install than other sealants. With this new injection system, pumping down the unit is a thing of the past. And now the industry's leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal direct inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of a UV light.

• Strongest sealant on the market
• Made in the U.S.A.
• Installs in seconds
• Precise formula that creates a permanent seal
• Polymer free
• OEM approved not to clog manifold gauges
• Works with all oils and refrigerants
• Proven not to plug TxVs, cap tubes or pisTons
• Concentrated formula means less material in system
• Clear tube so you can see the sealant go in
• No need to pump down R-410A units
• No injection hose or caulk gun needed
• 1-time use
• Treats 1-1/2 - 5 Ton

,
,

Nu-Calgon 4050-07

Nu-Calgon Freez-Kontrl 4188-02 Propylene Glycol, 55 Gallon Drum, Light Blue Freez-Kontr'l is a formulation of propylene glycol, dipotassium phosphate corrosion inhibitor and de-ionized water. The fluid is colored blue to aid in leak detection. It has an operating temperature range from below -60 to 230 deg F and solutions in water provide freeze protection to below -60 deg F and burst protection to below -100 deg F. Freez-Kontr'l is nearly odorless and the product of choice when contact with potable water is possible. The ingredients used in its manufacture are GRAS (generally recognized as safe), under title 21, part 182 of the US code of Federal regulations, where accidental or incidental contact with potable water could occur.

• Provides greater than -60 deg F freeze protection and greater than -100 deg F burst protection
• Complete solubility in water
• 371 deg C auto-ignition temperature
• Formulated for chilled water, hydronic and other closed systems
• Fully inhibited to prevent corrosion
• Non-flammable
• Non-toxic
• Low in acute oral toxicity Freez-Kontr'l is a formulation of propylene glycol, dipotassium phosphate corrosion inhibitor and de-ionized water. The fluid is colored blue to aid in leak detection. It has an operating temperature range from below -60 to 230 deg F and solutions in water provide freeze protection to below -60 deg F and burst protection to below -100 deg F. Freez-Kontr'l is nearly odorless and the product of choice when contact with potable water is possible. The ingredients used in its manufacture are GRAS (generally recognized as safe), under title 21, part 182 of the US code of Federal regulations, where accidental or incidental contact with potable water could occur.,
  ,
  

  Nu-Calgon 4188-02

Nu-Calgon EasySeal 4050-06 Refrigerant Leak Sealant, 3 oz Pressurized Can, A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil. The A/C EasySeal circulates through the system with the refrigerant seeking out leaks rather than migrating slowly with the oil keeping in mind that only a small portion of the system oil actually migrates with the refrigerant through the system. A/C EasySeal will react with moisture or air that is naturally present at a leak, forming a secure seal. A/C EasySeal is compatible with the refrigerant, oil and all system materials and it will not react until it comes into contact with the air and moisture at the leak, forming a permanent seal. A/C EasySeal is a time saver. It finds leaks quickly and seals them, saving the time and money required in searching for the smallest leaks. With A/C EasySeal, the contractor is able to just add a can to the system and be confident the leak has been fixed and move on to the next job.Sid Harvey Item #:4050-06: Replaces Part #:'s : 39783,
,

Nu-Calgon 4050-06

EasySeal direct inject is a new generation of sealants. Its patent pending injection method makes it easier to install than other sealants. With this new injection system, pumping down the unit is a thing of the past. And now the industry's leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal direct inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of a UV light.

• Concentrated formula means less material in system
• Clear tube so you can see the sealant go in
• No need to pump down R-410A units
• No injection hose or caulk gun needed
• 1-time use
• Treats fractional to 1.5 Ton
• Strongest sealant on the market
• Installs in seconds
• Precise formula that creates a permanent seal
• Polymer free
• OEM approved not to clog manifold gauges
• Works with all oils and refrigerants
• Proven not to plug TxVs, cap tubes or pisTons
• New UV dye formula available for detection of larger leaks

,
,

Nu-Calgon 4050-05

Freez-Kontr'l is a formulation of propylene glycol, dipotassium phosphate corrosion inhibitor and de-ionized water. The fluid is colored blue to aid in leak detection. It has an operating temperature range from below -60 to 230 deg F and solutions in water provide freeze protection to below -60 deg F and burst protection to below -100 deg F. Freez-Kontr'l is nearly odorless and the product of choice when contact with potable water is possible. The ingredients used in its manufacture are GRAS (generally recognized as safe), under Title 21, Part 182 of the US Code of Federal Regulations, where accidental or incidental contact with potable water could occur.

• Optimum freeze or burst protection
• Fully inhibited to prevent corrosion
• Non-flammable
• Uses renewable resourced propylene glycol
• Low in acute oral toxicity
• Colored blue for easy leak detection
• The complete heat transfer fluid and antifreeze

,
,

Nu-Calgon 4188-05

Nu-Calgon Drain Solve 4165-24 Drain Opener, 1 qt Bottle, Odorless, Clear, Drain Solve is an alkaline-based drain opener which removes grease, hair, vegetable and other organic matter. It is non-fuming and it will clean and clear drains quickly. Simply pour it down the drain and let it work without fear of noxious fumes or reactions that may squirt corrosive chemicals into face and eyes. This product is NSF registered.,
,

Nu-Calgon 4165-24

CleanVu is a highly effective aerosol cleaner for glass and all hard, non-porous surfaces. Its fast-drying, non-filming formula cleans dirt and grime, providing streak-free shine.,
,

Nu-Calgon 4081-85