Nu-Calgon 4050-15 UV Leak Detection Kit for 4050-11, 4050-12 EasySeal

Nu-Calgon 4050-15

Nu-Calgon 4060-56 A/C Inject

Nu-Calgon 4060-56

Nu-Calgon 4050-21 EasySeal Ultimate SS/UV Systems W/UV Dye Up to 2 Tons

Nu-Calgon 4050-21

Nu-Calgon 4084-03 It sprays a perfect non-stick surface on ice machine surfaces, vending machines, coin slots, slicing machines, dairy machinery and other food processing and packaging equipment. An excellent lubricant that prevents binding and sticking. This ultra fast drying silicone spray is formulated specifically for the needs of the ice machine and food industries. This medium viscosity formula provides light lubrication for ice machines, coin slots, guides, belts, slicing machines, ovens, mixers, grinders and other processing equipment. Applicable areas include those such as knives, cutting tables and blades, conveyor system maintenance, bottling and canning machinery, bakery equipment, dairy equipment, feed racks, in bars and restaurants, and virtually any equipment or machinery in or near food related areas. In addition, this product meets requirements for use in federally inspected meat and poultry plants. This silicone meets 21 CFR 175.300 for Resinous and Polymeric Coatings intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting or holding food. The silicone is colorless, odorless, heat stable and nonstaining. This hexane-free and low VOC formula contains no ozone droplets, carcinogens or chlorinated solvents. In addition, the fan spray pattern reduces overspray and waste.

Nu-Calgon 4084-03

Nu-Calgon 4050-02 A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil. The A/C EasySeal circulates through the system with the refrigerant seeking out leaks rather than migrating slowly with the oil keeping in mind that only a small portion of the system oil actually migrates with the refrigerant through the system. A/C EasySeal will react with moisture or air that is naturally present at a leak, forming a secure seal. A/C EasySeal is compatible with the refrigerant, oil and all system materials and it will not react until it comes into contact with the air and moisture at the leak, forming a permanent seal. A/C EasySeal is a time saver. It finds leaks quickly and seals them, saving the time and money required in searching for the smallest leaks. With A/C EasySeal, the contractor is able to just add a can to the system and be confident the leak has been fixed and move on to the next job.

4050-02

Nu-Calgon 4050-01 A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil. The A/C EasySeal circulates through the system with the refrigerant seeking out leaks rather than migrating slowly with the oil keeping in mind that only a small portion of the system oil actually migrates with the refrigerant through the system. A/C EasySeal will react with moisture or air that is naturally present at a leak, forming a secure seal. A/C EasySeal is compatible with the refrigerant, oil and all system materials and it will not react until it comes into contact with the air and moisture at the leak, forming a permanent seal. A/C EasySeal is a time saver. It finds leaks quickly and seals them, saving the time and money required in searching for the smallest leaks. With A/C EasySeal, the contractor is able to just add a can to the system and be confident the leak has been fixed and move on to the next job.

Treats fractional to 1.5 Ton
• Prevents refrigerant leaks and seals existing leaks in air conditioning and refrigeration systems permanently
• Eliminates expensive leak search and repair
• Travels with refrigerant to find leaks fast
• Utilizes a reusable hose
  
  

  4050-01

Nu-Calgon 4050-08 EasySeal Direct Inject Refrigerant Leak Sealant, Clear EasySeal direct inject is the strongest sealant on the market, with over a million leaks sealed. With this new injection system, pumping down the unit is a thing of the past. And now the industry's leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal direct inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of the UV Leak Detection Kit (4050-15).

Nu-Calgon 4050-08

Nu-Calgon 4050-07 EasySeal direct inject is a new generation of sealants. Its patent pending injection method makes it easier to install than other sealants. With this new injection system, pumping down the unit is a thing of the past. And now the industry's leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal direct inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of a UV light.

Strongest sealant on the market
• Made in the U.S.A.
• Installs in seconds
• Precise formula that creates a permanent seal
• Polymer free
• OEM approved not to clog manifold gauges
• Works with all oils and refrigerants
• Proven not to plug TXVs, cap tubes or pistons
• Concentrated formula means less material in system
• Clear tube so you can see the sealant go in
• No need to pump down R-410A units
• No injection hose or caulk gun needed
• 1-time use
• Treats 1-1/2 - 5 Ton
  
  

  Nu-Calgon 4050-07

Nu-Calgon 4050-06 EasySeal Refrigerant Leak Sealant, 3 oz. Pressurized Can, A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil. The A/C EasySeal circulates through the system with the refrigerant seeking out leaks rather than migrating slowly with the oil keeping in mind that only a small portion of the system oil actually migrates with the refrigerant through the system. A/C EasySeal will react with moisture or air that is naturally present at a leak, forming a secure seal. A/C EasySeal is compatible with the refrigerant, oil and all system materials and it will not react until it comes into contact with the air and moisture at the leak, forming a permanent seal. A/C EasySeal is a time saver. It finds leaks quickly and seals them, saving the time and money required in searching for the smallest leaks. With A/C EasySeal, the contractor is able to just add a can to the system and be confident the leak has been fixed and move on to the next job.

Nu-Calgon 4050-06

Nu-Calgon 4050-05 EasySeal direct inject is a new generation of sealants. Its patent pending injection method makes it easier to install than other sealants. With this new injection system, pumping down the unit is a thing of the past. And now the industry's leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal direct inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of a UV light.

Concentrated formula means less material in system
• Clear tube so you can see the sealant go in
• No need to pump down R-410A units
• No injection hose or caulk gun needed
• 1-time use
• Treats fractional to 1.5 Ton
• Strongest sealant on the market
• Installs in seconds
• Precise formula that creates a permanent seal
• Polymer free
• OEM approved not to clog manifold gauges
• Works with all oils and refrigerants
• Proven not to plug TXVs, cap tubes or pistons
• New UV dye formula available for detection of larger leaks
  
  

  Nu-Calgon 4050-05

Nu-Calgon 4081-85 CleanVu is a highly effective aerosol cleaner for glass and all hard, non-porous surfaces. Its fast-drying, non-filming formula cleans dirt and grime, providing streak-free shine.

Nu-Calgon 4081-85

Nu-Calgon 4057-99 The A/C Re-New Injector was designed to inject A/C Re-New into air conditioning and refrigeration systems. It has a capacity of 4 fl. oz. and can be used for other injectable products as well, including amounts less than the 4 fl. oz. capacity. It is constructed of rugged aluminum and has a maximum working pressure of 600 psi. It has a Schrader fitting at one end and a short length of hose with a ball valve on the other end.

4057-99