The NAVAC NRS2i01 series Bluetooth wireless electronic refrigerant scale is designed and reinforced with advanced technology, providing more precise and portable refrigerant charging technology. Through the Bluetooth connection between handheld device and electronic charging scale, you can perform other tasks while charging. While real-time refrigerant charge is transmitted to the handheld device, it will buzz when the charge is within 2 oz. of the setting, and alert the operator to stop the charging once the setting is reached. The magnesium alloy weighing pan and ergonomic, one-piece, portable design make it lighter and easier to carry

NRS2I01

NAVAC NP7DP Vacuum Pump 7 CFM 120/240 VAC,
,

NAVAC NP7DP

NAVAC NP7DP

With sharp cutting blade, ball bearings and aluminum alloy body, it makes tube cutting easy and efficient.

NTC12

NAVAC NTC15 Tubing Cutter 1/4"-1-5/8"
With sharp cutting blade, ball bearings and aluminum alloy body, it makes tube cutting easy and efficient.
,

NAVAC NTC15

NAVAC NTC15

The NRC62D smart charging machine, featuring a high-performance vacuum pump with increased efficiency and high ultimate vacuum, a Digital manifold, and a wireless refrigerant scale. It comes with temperature probes and 3-color refrigerant hoses. There is only one tool you need for your next charging task! The integrated smart control system is highlighted by automatic operation, built-in leak detection, real-time status display and warning notifications and a weigh-in or SH/SC charge options. Every tool you need is in one place with NAVAC!

NRC62D

NAVAC NP5DP
The NP5DP features twin cylinder for high ultimate vacuum, integrated cylinder structure for high performance and reliability and forced oil circulation for improved efficiency and durability.

Power Supply 115V/60Hz

Flow Rate CFM 5

RLA 4.3

Ultimate Vacuum 15 Micron

Pump Design Dual-Stage AC Motor

Motor Power 3/4 HP

Inlet Port 1/4, 3/8,1/2 Flare

Oil Capacity 17 oz.

Dimensions 14" × 5" × 11.3"

Weight 24.3 lbs.

Warranty 1 Year

NP5DP

NP5DP

The NAVAC NTBRK is a reverse bending kit that allows you to make reverse bends with your NTB7L and NTB7 Tube Bender.

NAVAC NTBRK

The NAVAC NTB7L It is a tough and frustrating job for HVAC Service Techs when bending large diameter tubes, which consumes tremendous labor work while needs precise focus on bending angles. Furthermore, to get the tube out of a traditional bender mandrel is another frustrating moment. Suitable for tubing sizing 1/4 to 7/8 OD, NAVAC NTB7L saves tons of your time and labor, and makes the job much easier. By pressing a single controller switch, you can bend the tube to any desired angle. When a bend is completed, the baffle will push the tube out automatically while tool resets, helping you to remove the tube effortlessly. Its large capacity lithium battery makes over 100 bends each charge and can be fully charged in 30 minutes.

NAVAC NTB7L

NAVAC NML1 Rechargeable Leak Detector

With semiconductor sensor, it is precise and has a long service life.

Equipped with a high-performance, rechargeable lithium battery, it is easy to carry and easy to use.

Refrigerants CFC, HCFC, HFC refrigerants and blends. R32 & R454B Compatible.

Minimum of leakage 0.1 oz/year (R-134a)

Response time 3s (depending on the size and location of leak)

Battery life 8 hours

System pressure 50 psi

Sensor life 1 year under normal usage (1500 h)

Length of probe 15.7 in

Weight 0.77 lbs

Calibration Auto

Warranty 1 year

,

NAVAC NML1

NAVAC NML1

NAVAC NHB2 High Flow Refrigerant Hose 1/2" x 6'
Fast and Efficient:

1/2 large diameter for fast evacuation

3200 psi burst pressure, 640 psi working pressure

4-layer construction for low permeation

Vacuum rated to 20 micron
,

NAVAC NHB2

NAVAC NHB2

NAVAC NHB1 Evacauation Hose High Flow 1/4" 3/8" 1/2" Diameter Black

NAVAC NHB1