Fujitsu FH3017TPSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

• 42K BTU 3-1/2 Ton
• 208/230/1 VA
• 21" Wide
• PSC Motor
• Multi-Position,
  

  Fujitsu FH4221TPSJSN

Features

New composite base pan  dampens sound, secures wire grille, eliminates corrosion and reduces number of fasteners needed

Improved tubing design  reduces vibration and stress, making unit quieter and reducing opportunity for leaks

Optimized defrost characteristics - decrease defrosting and provide better home comfort

Powder coat paint finish  for a long lasting professional finish

Optimized reversing valve sizing  improves shifting performance for quieter unit operation and increased life of the system

Enhanced mufflers  help to dissipate vibration energy for quieter unit operation

Scroll compressor  a sound abating feature added to the compressor significantly reduces noise when system transitions in and out of defrost mode

Modern cabinet aesthetics  increased curb appeal with visually appealing design

Louver panels  provide ultimate coil protection, enhance cabinet strength and increase cabinet rigidity

Optimized fan orifice  optimizes airflow and reduces unit sound

Rust resistant screws  confirmed through 1500-hour salt spray testing

Service valve has between  3"-4"-5" valve space  provides a minimum working area of 27-square inches for easier access

Integrated heat pump lift receptacle  allows standard CPVC stands to be inserted into the base

15" wide, industry leading corner service access  makes repairs easier and faster.

External gauge port access  allows easy connection of low-loss gauge ports

Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance

Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal

Service trays  hold fasteners or caps during service calls

QR code  provides technical information on demand for faster service calls

Fan motor harness with extra-long wires  allows unit top to be removed without disconnecting fan wire

Fujitsu FO4815RSJNAA

Features

New composite base pan  dampens sound, secures wire grille, eliminates corrosion and reduces number of fasteners needed

Improved tubing design  reduces vibration and stress, making unit quieter and reducing opportunity for leaks

Optimized defrost characteristics - decrease defrosting and provide better home comfort

Powder coat paint finish  for a long lasting professional finish

Optimized reversing valve sizing  improves shifting performance for quieter unit operation and increased life of the system

Enhanced mufflers  help to dissipate vibration energy for quieter unit operation

Scroll compressor  a sound abating feature added to the compressor significantly reduces noise when system transitions in and out of defrost mode

Modern cabinet aesthetics  increased curb appeal with visually appealing design

Louver panels  provide ultimate coil protection, enhance cabinet strength and increase cabinet rigidity

Optimized fan orifice  optimizes airflow and reduces unit sound

Rust resistant screws  confirmed through 1500-hour salt spray testing

Service valve has between  3"-4"-5" valve space  provides a minimum working area of 27-square inches for easier access

Integrated heat pump lift receptacle  allows standard CPVC stands to be inserted into the base

15" wide, industry leading corner service access  makes repairs easier and faster.

External gauge port access  allows easy connection of low-loss gauge ports

Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance

Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal

Service trays  hold fasteners or caps during service calls

QR code  provides technical information on demand for faster service calls

Fan motor harness with extra-long wires  allows unit top to be removed without disconnecting fan wire

Fujitsu FO4215RSJNAB

Features

New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed

Powder coat paint system  for a long lasting professional finish

Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability

Modern cabinet aesthetics  increased curb appeal with visually appealing design

Curved louver panels  provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity

Optimized fan orifice  optimizes airflow and reduces unit sound

Rust resistant screws  confirmed through 1500-hour salt spray testing

3"-4"-5" service valve space  provides a minimum working area of 27-square inches for easier access

15" wide, industry leading corner service access  makes repairs easier and faster

External gauge port access  allows easy connection of low-loss gauge ports

Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance

Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal

Service trays  hold fasteners or caps during service calls

QR code  provides technical information on demand for faster service calls

Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.

Fujitsu FO6014CSDNB

Fujitsu Heating Parts FP-15-1PK Conversion Kit Natural to LP

fujitsu heating parts fp-15-1pk

Fujitsu Heating Parts FP-38 LP Conversion Kit

fujitsu heating parts fp-38

Rheem Parts FP-34 Conversion Kit

Rheem Heating Parts FP-34

Features

New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed

Powder coat paint system  for a long lasting professional finish

Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability

Modern cabinet aesthetics  increased curb appeal with visually appealing design

Curved louver panels  provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity

Optimized fan orifice  optimizes airflow and reduces unit sound

Rust resistant screws  confirmed through 1500-hour salt spray testing

3"-4"-5" service valve space  provides a minimum working area of 27-square inches for easier access

15" wide, industry leading corner service access  makes repairs easier and faster

External gauge port access  allows easy connection of low-loss gauge ports

Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance

Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal

Service trays  hold fasteners or caps during service calls

QR code  provides technical information on demand for faster service calls

Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.

Fujitsu FO1814RSJNAB

Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort

Fujitsu A/C Parts K9309997011

Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort

Fujitsu A/C Parts K0600424039