Features

95% residential gas furnace CSA certified

4 way multi-poise design

7-Segment LED all units

Ignition System  Direct Spark Ignition for reliability and longevity

Water Management System with patented Blocked Drain Sensor

Heat exchanger is removable for improved serviceability. Aluminized steel primary and stainless steel secondary construction provide maximum corrosion resistance and thermal fatigue reliability.

Low profile 34 inch cabinet ideal for space constrained installations.

Blower Shelf design  serviceable in all furnace orientations

Pre marked hoses  insures proper system drainage

Vent with 2" or 3" PVC

Replaceable Collector box

Hemmed edges on cabinet and doors

Constant Torque electrically commutated motor

Quarter turn fasteners for tool less access

Integrated control boards feature dip switches for easy system set up

Self priming condensate trap

Solid bottom included

Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

Fujitsu FF95ST508521M4SNAAS

Features:

Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].

Constructed of aluminum fins bonded to internally grooved aluminum tubing.

Coils are tested at the factory with an extensive refrigerant leak check.

Coils have copper sweat refrigerant connections.

Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.

Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).

Approved for system application with variety of Fujitsu outdoor units.

Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.

Compatible with Germicidal Light System (UV resistant)

Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.

Unique drain pan design maximizes application flexibility and condensate removal.

N-Coil design maximizes performance and minimizes height required at installation.

Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

Fujitsu Unitary FCCN4921SZTA

Features:

Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].

Constructed of aluminum fins bonded to internally grooved aluminum tubing.

Coils are tested at the factory with an extensive refrigerant leak check.

Coils have copper sweat refrigerant connections.

Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.

Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).

Approved for system application with variety of Fujitsu outdoor units.

Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.

Compatible with Germicidal Light System (UV resistant)

Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.

Unique drain pan design maximizes application flexibility and condensate removal.

N-Coil design maximizes performance and minimizes height required at installation.

Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

Fujitsu Unitary FCC2417TSA

Features:

Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].

Constructed of aluminum fins bonded to internally grooved aluminum tubing.

Coils are tested at the factory with an extensive refrigerant leak check.

Coils have copper sweat refrigerant connections.

Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.

Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).

Approved for system application with variety of Fujitsu outdoor units.

Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.

Compatible with Germicidal Light System (UV resistant)

Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.

Unique drain pan design maximizes application flexibility and condensate removal.

N-Coil design maximizes performance and minimizes height required at installation.

Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

Fujitsu Unitary FCC4824TSA

Fujitsu FF40173TS92M Gas Furnace 40K BTU 92% AFUE Constant Torque Motor Multi-Pos Not Down-Flow 17"W,
,

Fujitsu FF40173TS92M

Fujitsu FH3017TPSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

• 42K BTU
• 3-1/2 Ton
• 115/1 VAC
• 21" Wide
• PSC Motor
• Multi-Position,
  ,
  

  Fujitsu FH4221TPSASN

Fujitsu FH4821TPSASN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

• 48K BTU 4 Ton
• 115/1 VAC
• 21" Wide
• PSC Motor
• Multi-Position,
  ,
  

  Fujitsu FH4821TPSJSN