Fujitsu FO3617CTJCBA A/C Condensing Unit Non-Communicating No Pressure Switch 17 SEER 208/230/1 R410A 3 Ton

New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
• Better coat paint system  for a long lasting professional finish.
• Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability.
• Modern cabinet aesthetics  increased curb appeal with visually appealing design.
• Covered louver panels  provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
• Optimized fan orifice  optimizes airflow and reduces unit sound.
• Rust resistant screws  confirmed through 1500-hour salt spray testing.
• 3"-4"-5" service valve space  provides a minimum working area of 27-square"es for easier access.
• 15" wide, industry leading corner service access makes repairs easier and faster.
• External gauge port access  allows easy connection of low-loss gauge ports.
• Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
• Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal.
• Service trays  hold fasteners or caps during service calls.
• QR code  provides technical information on demand for faster service calls.
• Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire
  
  

  FO3617CTJCBA

Rheem A/C RSPMA036JK000 Packaged Air Conditioner Dedicated Horizonta 3 Ton 208/230/1 14 SEER

Name Rheem RSPM-A036JK000 - Classic 3 Ton, 14 SEER, Packaged Air Conditioner - Dedicated Horizontal, 208-230 V, 1 Ph, 60 Hz
• Weight 333Lbs.s
• Length 59.9"
• Width 34.0"
• Height 33.5"
• SEER 14
• EER 12.2
• Refrigerant R-410A
• CFM 3,400
• Cooling Capacity 36,000 BTU
• Air Flow Horizontal
• Voltage 208/230 VAC
• Phase Single
• Minimum Circuit Amps 22.6
• Maximum Fuse Size 40
• Blower Motor HP 1/2 HP
• Condenser Motor HP 1/3 HP
• Drive Type Direct Drive
• Energy Star Rated Yes
  
  

  RSPMA036JK000

New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed

Powder coat paint system  for a long lasting professional finish

Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability

Modern cabinet aesthetics  increased curb appeal with visually appealing design

Louver panels  provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity

Optimized fan orifice  optimizes airflow and reduces unit sound

Rust resistant screws  confirmed through 1500-hour salt spray testing

3"-4"-5" service valve space  provides a minimum working area of 27-square inches for easier access

15" wide, industry leading corner service access  makes repairs easier and faster

External gauge port access  allows easy connection of low-loss gauge ports

Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance

Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal

Service trays  hold fasteners or caps during service calls

QR code  provides technical information on demand for faster service calls

Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.

Fujitsu FH6024TTSASN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

Fujitsu FH6024TTSASN

Features

Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].

Constructed of aluminum fins bonded to internally grooved aluminum tubing.

Coils are tested at the factory with an extensive refrigerant leak check.

Coils have copper sweat refrigerant connections.

Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.

Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).

Approved for system application with variety of Fujitsu outdoor units.

Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.

Compatible with Germicidal Light System (UV resistant)

Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.

Unique drain pan design maximizes application flexibility and condensate removal.

N-Coil design maximizes performance and minimizes height required at installation.

Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

Fujitsu Unitary FCCN3621SZTA