Home  > DIVERSIFIED HEAT TRANSFER INC.(x)
View:
Diversified Heat Transfer TX-80 Indirect Water Heater 80 Gallon Stainless Steel

PROTECTION AGAINST CORROSION The DHT TX Series of stainless steel water heaters are manufactured from 1.4521 Niobium-Titanium stabilized steel, which offers protection against corrosion.

REDUCED ENERGY COST

The TX Series Water Heaters offer rapid recovery rates and an industry leading heat loss performance of less than 239 btu/h. This can reduce energy costs by up to 15 %. This is achieved by injecting high density CFC free and fire retardant polyurethane foam insulation.

REDUCED MAINTENANCE COST

Unlike glass lined water heaters, an anode is not needed thus reducing maintenance costs for the consumer.

PATENTED AND ENVIRONMENTALLY FRIENDLY

All good quality stainless steel water heaters need pickling to prolong their life. Pickling is essential for products installed in areas where the water has a high chloride or lime value. To avoid the environmental impact of pickling, a patented in-house pickling process was created to reuse up to 95% of the water consumed. All discharged water is also cleaned of chemicals before being released back in to the environment, and the extracted chemicals are treated and recycled.

LEADING WELDING TECHNOLOGY

The DHT TX Series of stainless steel water heaters are TIG welded using a fully automated welding technique,which is clean and smooth to prevent crevice corrosion. The welding technique reduces stress and damage to the integrity of the steel and eliminates product rejections during production. The TX stainless steel water heaters offerthe user excellent performance and service for many years.,

Diversified Heat Transfer TX-80

,

TX-80

Item#:
TX-80
Manufacturer Item:
TX-80
Manufacturer:
DIVERSIFIED HEAT TRANSFER INC.
Diversified Heat Transfer TX-50 Indirect Water Heater 50Gallon Stainless Steel

PROTECTION AGAINST CORROSION The DHT TX Series of stainless steel water heaters are manufactured from 1.4521 Niobium-Titanium stabilized steel, which offers protection against corrosion.

REDUCED ENERGY COST

The TX Series Water Heaters offer rapid recovery rates and an industry leading heat loss performance of less than 239 btu/h. This can reduce energy costs by up to 15 %. This is achieved by injecting high density CFC free and fire retardant polyurethane foam insulation.

REDUCED MAINTENANCE COST

Unlike glass lined water heaters, an anode is not needed thus reducing maintenance costs for the consumer.

PATENTED AND ENVIRONMENTALLY FRIENDLY

All good quality stainless steel water heaters need pickling to prolong their life. Pickling is essential for products installed in areas where the water has a high chloride or lime value. To avoid the environmental impact of pickling, a patented in-house pickling process was created to reuse up to 95% of the water consumed. All discharged water is also cleaned of chemicals before being released back in to the environment, and the extracted chemicals are treated and recycled.

LEADING WELDING TECHNOLOGY

The DHT TX Series of stainless steel water heaters are TIG welded using a fully automated welding technique,which is clean and smooth to prevent crevice corrosion. The welding technique reduces stress and damage to the integrity of the steel and eliminates product rejections during production. The TX stainless steel water heaters offerthe user excellent performance and service for many years.,

diversified heat transfer tx-50

,

TX-50

Item#:
TX-50
Manufacturer Item:
TX-50
Manufacturer:
DIVERSIFIED HEAT TRANSFER INC.
Diversified Heat Transfer TX-40 Indirect Water Heater 42Gallon Stainless Steel

PROTECTION AGAINST CORROSION The DHT TX Series of stainless steel water heaters are manufactured from 1.4521 Niobium-Titanium stabilized steel, which offers protection against corrosion.

REDUCED ENERGY COST

The TX Series Water Heaters offer rapid recovery rates and an industry leading heat loss performance of less than 239 btu/h. This can reduce energy costs by up to 15 %. This is achieved by injecting high density CFC free and fire retardant polyurethane foam insulation.

REDUCED MAINTENANCE COST

Unlike glass lined water heaters, an anode is not needed thus reducing maintenance costs for the consumer.

PATENTED AND ENVIRONMENTALLY FRIENDLY

All good quality stainless steel water heaters need pickling to prolong their life. Pickling is essential for products installed in areas where the water has a high chloride or lime value. To avoid the environmental impact of pickling, a patented in-house pickling process was created to reuse up to 95% of the water consumed. All discharged water is also cleaned of chemicals before being released back in to the environment, and the extracted chemicals are treated and recycled.

LEADING WELDING TECHNOLOGY

The DHT TX Series of stainless steel water heaters are TIG welded using a fully automated welding technique,which is clean and smooth to prevent crevice corrosion. The welding technique reduces stress and damage to the integrity of the steel and eliminates product rejections during production. The TX stainless steel water heaters offerthe user excellent performance and service for many years.,

diversified heat transfer tx-40

,

TX-40

Item#:
TX-40
Manufacturer Item:
TX40
Manufacturer:
DIVERSIFIED HEAT TRANSFER INC.
Diversified Heat Transfer Techtanium TT-40 Powder Coat Painted Steel Jacket Indirect Water Heater, 40 Gallon, 10 gpm, 120000 BTU
  • Extra large heat exchanger surface area - high recovery and continuous flow for abundant hot water
  • Titanium glass lined - high elasticity that adapts to expansion and contraction for added strength and durability, provides a resistant layer of protection against corrosion
  • Exterior steel jacket with powder coat paint - durable and solid for life lasting exterior appearance, polyurethane foam (PUF) insulation reduces standby heat loss
  • Side connections for TT series
  • Works with any hydronic heat source for domestic hot water
  • Environmentally friendly polyurethane insulation limits heat loss and is both CFC and HFC- free
  • Polyurethane foam for outstanding insulation and reduced power consumption- CFC free
  • All models supplied magnesium anti-corrosion anodes
  • TT models - (2) magnesium anti-corrosion anodes
  • Environmentally and Installer friendly
  • Includes - Honeywell L4006A aquastat, immersion well
  • 7 years residential, 3 years commercial warranty
,

diversified heat transfer tt-40

,

TT-40

Item#:
TT-40
Manufacturer Item:
TT-40
Manufacturer:
DIVERSIFIED HEAT TRANSFER INC.
Diversified Heat Transfer AR405579 Anode Rod TT-40/TT-55
Item#:
AR405579
Manufacturer Item:
AR405579
Manufacturer:
DIVERSIFIED HEAT TRANSFER INC.
Item#:
NCG-V1
Diversified Heat Transfer AHCC-2-175 Cased Hot Water 2 Row 17-1/2"

The AHCC Series Cased Hydronic Heating Units are designed to provide exceptional hydronic heating when matched with any residential air handling system and a hot water source. The unit may be mounted upflow, counterflow or horizontally on the return end of the air handler or within the duct system. The coils are designed and tested in accordance with the current AHRI Standard 410 and manufactured with UL listed components.
  • High Performance Aluminum Fins
  • Fully Insulated
  • Embossed Galvanized Casing with Access Panel
  • Simple Installation in Multiple Configurations,

    Diversified Heat Transfer AHCC-2-175

    ,

    AHCC-2-175

Item#:
AHCC-2-175
Manufacturer Item:
AHCC-2-175
Manufacturer:
DIVERSIFIED HEAT TRANSFER INC.
Diversified Heat Transfer AHCC-2-210 Cased Hot Water 2 Row 21"

The AHCC Series Cased Hydronic Heating Units are designed to provide exceptional hydronic heating when matched with any residential air handling system and a hot water source. The unit may be mounted upflow, counterflow or horizontally on the return end of the air handler or within the duct system. The coils are designed and tested in accordance with the current AHRI Standard 410 and manufactured with UL listed components.
  • High Performance Aluminum Fins
  • Fully Insulated
  • Embossed Galvanized Casing with Access Panel
  • Simple Installation in Multiple Configurations,

    Diversified Heat Transfer AHCC-2-210

    ,

    AHCC-2-210

Item#:
AHCC-2-210
Manufacturer Item:
AHCC-2-210
Manufacturer:
DIVERSIFIED HEAT TRANSFER INC.
Diversified Heat Transfer AHCC-2-235 Cased Hot Water Coil 2 Row,

Diversified Heat Transfer AHCC-2-235

,

AHCC-2-235

Item#:
AHCC-2-235
Manufacturer Item:
AHCC-2-235
Manufacturer:
DIVERSIFIED HEAT TRANSFER INC.
Diversified Heat Transfer CP-7.5 Coil Plate 7-1/2" W/1/2" Tapping,

CP-7.5

Item#:
CP-7.5
Manufacturer Item:
LW PLATE W/GASKET
Manufacturer:
DIVERSIFIED HEAT TRANSFER INC.
Diversified Heat Transfer DXMC-1836 Low Profile Heat Pump Evaporator Coil M-Style 3 Ton
  • Heat Pump Evaporator Coil
  • 17" Width x 20-1/2" Depth x 8-1/4"Height
  • Material Aluminum (Fin), Rifled Copper (Tube)
  • Used On Item Refrigerant, Condensing/Heat Pump System
  • Type Upflow/Downflow, Low Profile
  • Refrigerant Type R22, R-410A
  • Capacity 1.5 to 3 Ton
  • Air Flow Rating 600 to 1200 CFM
    ,

    DXMC-1836

Item#:
DXMC-1836
Manufacturer Item:
DXMC-1836
Manufacturer:
DIVERSIFIED HEAT TRANSFER INC.
Diversified Heat Transfer DXMC-3048 Low Profile Heat Pump Evaporator Coil M-Style 4 Ton
  • Heat Pump Evaporator Coil
  • Size 21" Width x 20-1/2" Depth x 10-1/8" Height
  • Material Aluminum (Fin), Rifled Copper (Tube)
  • Used On Item Refrigerant, Condensing/Heat Pump System
  • Type Upflow/Downflow, Low Profile
  • Refrigerant Type R22, R-410A
  • Capacity 2.5 to 4 Ton
  • Air Flow Rating 1,000 to 1,600 CFM,

    DXMC-3048

Item#:
DXMC-3048
Manufacturer Item:
DXMC-3048
Manufacturer:
DIVERSIFIED HEAT TRANSFER INC.
View: