Home  > RUTHERFORD EQUIPMENT INC.(x)
View:
Olympian GM-3X Gas-Match Refillable Flexible Butane Lighter for Fireplaces
Item#:
GM-3X
Manufacturer Item:
GM3X
Manufacturer:
RUTHERFORD EQUIPMENT INC.
The type R232 is an underwriters laboratories listed regulator designed for LP-gas systems. The unit is designed to reduce the tank pressure to an outlet pressure of 11 Inch water column through an integral two-stage system. Designed for installations with small domestic loads. The units compact size makes it ideal for tight fit applications. Screened drip-lip vents are oriented over the outlet as standard.
  • 20 years recommended replacement life - the R232 is designed using rugged time proven design concepts and constructed of corrosion resistant materials, both internally and externally, with proper installation and periodic inspection and maintenance the R232 regulator will meet a 20 years recommended replacement life
  • Dual gauge taps - built-in 1/8 Inch NPT gauge taps orificed to a number 54 drill size on the intermediate and outlet side of the regulator allow for easy gas system checks
  • Durability - design utilizes the same durable valve stem linkage design used in R600 series regulators for reliable lockup performance
  • Improved regulation - a large fabric-reinforced diaphragm delivers accurate and stable regulation
  • Versatile inlet connections - inlet fitting is available in NPT and FPOL configurations
  • Easy installation - the units compact size and easily accessible inlet and outlet wrench flats make installation easy even in the tightest installations
  • Superior overpressure protection - the combination of a high capacity relief valve and large vent provide overpressure protection that exceeds UL standards
  • Corrosion-resistant - added corrosion resistance from an internal and external coating process for all castings prior to painting, stainless steel relief valve spring and retainer and a corrosion resistant relief valve seat
  • Positive draining spring case - when installed properly with the spring case vents pointed down, the design allows moisture formed in the spring case to drain out limiting the problems with corrosion and freezing water in the spring case
  • Designed for installations with small capacity loads
  • 11 Inch WC outlet pressure setting
Item#:
R232BBF
Manufacturer Item:
R232BBF
Manufacturer:
RUTHERFORD EQUIPMENT INC.
Item#:
DLK08
Manufacturer:
RUTHERFORD EQUIPMENT INC.
The type R622 second-stage regulators are underwriters laboratories listed regulators designed for two-stage LP-gas systems. These units are designed to reduce the outlet pressure from a first-stage regulator (usually 10 psig) to 11 Inch water column. The R622 incorporates the standard straight-though flow design while the R652 is designed for back mount installations. Both have screened drip-lip vents are oriented over the inlet as standard.
  • 20 years recommended replacement life - the R622 are designed using rugged time proven design concepts and constructed of corrosion resistant materials, both internally and externally. With proper installation and periodic inspection and maintenance the R622 designs will meet a 20 year recommended replacement life.
  • Improved regulation - Fishers large fabric reinforced diaphragm and spring assisted vent stabilizer deliver accurate and stable regulation
  • Over-pressure protection - the combination of a high capacity relief valve and large vent provide overpressure protection which exceeds UL standards by limiting the downstream pressure to 2 psig even in a double failure situation when used with a R622H
  • Inlet screen - Fishers stainless steel inlet screen reduces the amount of debris that can enter the regulator
  • Gauge taps - built-in 1/8 Inch NPT gauge taps orificed to a number 54 drill size on upstream and downstream for easy gas system checks
  • 11 Inch WC outlet adjustment setting
Sid Harvey Item #:R622-DFF: Replaces Part #:'s : R622-DFF
Item#:
R622-DFF
Manufacturer Item:
R622-DFF
Manufacturer:
RUTHERFORD EQUIPMENT INC.
Rutherford Equipment Fisher R652-DFF Palm Green Propane Gas Regulator, 3/4 Inch, FNPT, 1000000 BTU/hr
  • Large capacity
  • Regulators with full capacity internal relief valve with 3/4 Inch FNPT vent
  • Have built-in 1/8 Inch FNPT gauge taps on both inlet and outlet sides
  • Capacities based on 10 psig inlet and 2 Inch WC droop
Item#:
R652-DFF
Manufacturer Item:
R652-DFF
Manufacturer:
RUTHERFORD EQUIPMENT INC.
Designed for use as a first-stage regulator for domestic applications, the type R122Hs size makes it perfect for tight installations. Stainless steel internal parts and corrosion resistant coatings provide a recommended replacement life of 20 years. Its non-adjustable setpoint makes the unit virtually tamper proof. Inlet and outlet gauge taps allow easy system testing. Large inlet and outlet wrench flats provide for easy installation, even in underground tanks. The outlet pressure setpoint remains at a nominal factory setting of 10 psig. The designs superior relief performance exceeds. UL requirements and provides double failure overpressure protection when used with R600 series second-stage regulator. The units fluorocarbon (FKM) valve disc provides better lockup performance and durability in contaminated gas. The vent is with 3/8 Inch NPT for easy installation of vent piping. A large fabric reinforced diaphragm provides accurate regulation. The large orifice assists in minimizing freeze problems.
  • These first-stage regulators reduce tank pressure to a lower pressure (usually 10 psig) for a second-stage regulator
  • Vents are screened with standard orientation over the outlet
  • Non-adjustable outlet adjustment range
  • 10 psig outlet pressure setting
  • Small, non-adjustable first stage regulator that is factory set at 10 psig, contains a relief valve and large vent
Sid Harvey Item #:R122H-AAJ: Replaces Part #:'s : 0LP001
Item#:
R122H-AAJ
Manufacturer Item:
R122H-AAJ
Manufacturer:
RUTHERFORD EQUIPMENT INC.
Rutherford Equipment Fisher R632A-JFF Integral Regulator, 3/4 Inch Outlet, Female POL x FNPT, 250 psig Inlet, 850000 BTU/hr
  • Integral two-stage units combine a first stage and second stage regulator into one compact unit
  • Recommended for installations where piping distance is short
  • Reduced freezing problems
  • Improved regulation
  • High capacity relief valve
  • First and second stage 1/8 Inch pressure taps
  • 5 years warranty
  • 20 year recommended replacement life
  • Full capacity relief limits delivery pressure to 2 psi with a 20 psi inlet pressure
  • Over outlet vent location
  • 3/4 Inch FNPT vent size
  • Stainless steel inlet screen
  • Gray, straight through design
  • Built-in gauge taps
Item#:
R632A-JFF
Manufacturer Item:
R632A-JFF
Manufacturer:
RUTHERFORD EQUIPMENT INC.
Rutherford Equipment Fisher R622H-JGJ Regulator, 3/4 Inch Outlet, FPOL x FNPT, 2250000 BTU/hr
Sid Harvey Item #:R622H-JGJ: Replaces Part #:'s : R622H-JGJ
Item#:
R622H-JGJ
Manufacturer Item:
R622-JGJ
Manufacturer:
RUTHERFORD EQUIPMENT INC.
The time-proven design, constructed from corrosion-resistant materials, provides a recommended replacement life of 20 years.
  • Designed to reduce the outlet from a first stage regulator 10 psig to an outlet pressure of 11 Inch WC
  • 90 deg body design makes the R642 ideal for metered installations
  • Spring case vent over outlet
  • Capacities based on 10 psig inlet and 2 Inch WC droop
Item#:
R642-DFF
Manufacturer Item:
R642-DFF
Manufacturer:
RUTHERFORD EQUIPMENT INC.
Rutherford Equipment L102-118 Low Pressure Ball Valve, 3/4 x 1/2 Inch,
Item#:
L102-118
Manufacturer:
RUTHERFORD EQUIPMENT INC.
Rutherford Equipment 419-5/8 J Tubing Clip, 5/8 Inch
Item#:
JCL-2
Manufacturer Item:
419-5
Manufacturer:
RUTHERFORD EQUIPMENT INC.
Rutherford Equipment Fisher R632-BCF Integral Regulator, 1/4 x 1/2 Inch, 700000 BTU/hr
  • 11 Inch outer pressure
Item#:
R632-BCF
Manufacturer Item:
R632-BCF
Manufacturer:
RUTHERFORD EQUIPMENT INC.
View: