Fieldpiece Instruments SM380V Wireless 3-Port SMAN Refrigerant Manifold,
,

Fieldpiece Instruments SM380V

Fieldpiece Instruments SRS1 Refrigerant Scale W/Weight Alarm Convenient Features and Heavy Duty Design,
,

Fieldpiece Instruments SRS1

Fieldpiece Instruments SRS1

Fieldpiece Instruments SM480V Charging Hose Set 3 Pack 1/4" x 60" Red,Yello,Blue Seal Right,
,

Fieldpiece Instruments SM480V

Fieldpiece Instruments SM480V

Fieldpiece Instruments SMG5 Digital Megohmmeter, 1000 VDC, Backlit LCD The Fieldpiece digital megohmmeter, model SMG5, is a compact standalone meter designed for checking HVAC compressor insulation. The SMG5 provides a 1000 volt source, monitors current and displays the resistance between the test points. Maximum current output is less than 1 milli-amp. It can be used to determine the condition of insulation from winding to ground in a motor, compressor, or transformer. Includes a case, alligator clip lead tip and leads with removable tips.,
,

Fieldpiece Instruments SMG5

Fieldpiece Instruments SMG5

Fieldpiece Instruments this newly designed SPK2 folding pocket thermometer is great for taking quick air temperatures. It fits directly in your pocket so you're ready for common temperature checking. The folding rod has a hanging hook so you can easily hang it in a duct or on a grille. The large display shows min/max/hold, has measurements in both fahrenheit and celsius, and has a low battery indicator. It also quickly calculates T1-T2, as well as features an auto power off function to save battery power on it's already phenomenal 8000 hr of battery life on one single AA battery.

• Hang on air registers or duct walls
• Large display
• Rod folds into body
• Auto off after 15 min
• Measuring range -58 to 392 deg F

,

,

Fieldpiece Instruments SPK2

Fieldpiece Instruments SPK2

Fieldpiece Instruments SPK1 pocket knife style thermometer features a sharp tip for punching through flex duct and hangs easily from a vent or thermostat. Pull out the probe rod just like you would a pocket knife. 16 detent position grooves hold the rod at virtually at any angle. The probe rod folds away simply with no cover sleeve to lose. One of our most popular instruments for HVAC/R field service.

• Convenient probe tip protection and storage
• Easily fits in shirt pocket
• Easily hangs from vent or register
• Min/Max function
• Hold function
• Auto off after 10 min

,

,

Fieldpiece Instruments SPK1

Fieldpiece Instruments SPK1

Fieldpiece Instruments SPK3 Folding ROD Pocket Thermometer, 32 - 14 deg F, Plus/Minus 4 deg F IR, Bright Backlight, (2) AAA Battery

• The SPK3 temperature pocket tool has convenient two-way temperatures with both a folding in-duct Rod temperature and an infrared 8:1 gun
• The IR takes quick surface temperature readings and the rod measures in the duct easily with a hanging hook for hands-free testing
• The SPK3 temperature tool also features max/min/hold functions, a backlight and a display that flips depending on what temperature mode is chosen
• Plus, the SPK3 quickly calculates T1-T2 and it works across both the IR and rod modes
• Great to quickly assess a system
• 8:1 IR for register and ambient temps
• Hands free in-duct measurements
• Battery life - 4 hr (IR), 75 hr (ROD)
• Auto-off - 3 min, 15 min (T1-T2 mode)
• 8:1 field of view
• .5 sec (IR), 2 sec (ROD) response time
• 8 - 14 micro-m wavelength
• .95 emissivity
• Plus/Minus 1 deg F accuracy
• 3-3/4" probe length

,
,

Fieldpiece Instruments SPK3

Fieldpiece Instruments SPK3

Fieldpiece Instruments SOx3 Combustion Checker With Auto Pump, 0 - 25%, The SOx3 Combustion Check is a great tool to easily tune furnaces when a full combustion analysis isn't necessary. Designed specifically for HVACR pros, the SOx3 provides all the essential measurements needed to tune most combustion equipment. It directly measures %O2 and flue temperature, and calculates %CO2, %Excess Air, and combustion efficiency. Like all Fieldpiece products, the SOx3 Combustion Check Tool was designed to help HVACR professionals do more with their tools. From custom fuels to field-replaceable oxygen sensors, the SOx3 can be trusted to measure up for any furnace tuning job.,

,

Fieldpiece Instruments SOX3

Fieldpiece Instruments SOX3

Fieldpiece Instruments STA2 is a Hot-wire Anemometer built for the HVACR professionals' air balancing needs. The compact probe tip makes measuring air velocity directly in the duct a breeze. It's great for traversing a duct and automatically calculating CFM without the hassle and expense of a bulky hood. The 38" telescoping probe's laser etched ruling and flattened edges allows techs to locate proper measurement points within a duct, and ensures that the probe is properly aligned. This in duct hot-wire anemometer quickly calculates CFM from air velocity and free area. And with the intuitive interface, the STA2 makes it easy to capture the correct data.

• Measures air velocity and temperature
• Calculates cfm air volume
• Slim 38" telescoping probe for in duct traversing
• Fast response time
• Dual display for combo of real-time cfm, air velocity or temperature
• Depth and direction indicators
• Minimizes turbulence effect with time/test point averages
• Hands-free testing with stabilizing cone and magnetic hanger
• In-duct air balancing with fast response time

,
,

STA2

STA2

Fieldpiece Instruments ST4 Ruggedized Rubber Digital Display Dual The Fieldpiece dual-temperature meter, model ST4, measures 2 temperatures simultaneously using the included k-type, wrap tab beaded thermocouples. The technology inside the ST4 provides superior temperature compensation in rapidly changing environments commonly found while performing field service. Use the ST4 to find delta T and just about any temperature split you want to measure. Displays T1, T2 and T1-T2 in big numbers on the LCD screen. Features 2 front face calibration pots and comes in our clear front case with magnetic hanger model ANC6. Use with our optional ATWB1 wet bulb thermocouple to help you find target superheat or with our pipe clamp T/Cs to check for blocked dryer filters. Because of the technology employed inside the ST4, it offers superior temperature compensation in rapidly changing environments commonly found while performing field service. Meters with thermocouple adapters often take a long time to stabilize due to transfer of ambient heat. The ST4, as with all of our k-type thermometers and meters, stabilizes rapidly so you can take it from the rooftop to the walk-in and get more accurate readings faster than the competition. Plus it includes the rugged rubber boot and the hanging bag for easy, hands-free testing, while you're working on the rest of your call.,
,

Fieldpiece Instruments ST4

Fieldpiece Instruments ST4