Fieldpiece Instruments SC640 Loaded Clamp Meter, 400 amp, 50 mili-ohm, 50 The SC640 clamp meter is packed with more features and measurements than any clamp meter in the HVACR industry. The loaded SC640 features lead storage, a swivel head, test lead holder, heavy duty magnetic strap, jaw flashlight, and a backlight on the dial so you can easily choose the right measurement in poorly lit spaces. Plus the SC640 hosts all the electrical measurements HVACR pros use everyday, along with features like True RMS, Inrush current, capacitance, temperature, duty cycle, and uA DC.

Fieldpiece Instruments SC640

Fieldpiece Instruments SC440 Essential Clamp Meter, 600 VAC/VDC, 400 amp The mid-size essential clamp meter has virtually every parameter for electrical and thermal HVACR testing in one meter. This auto and manual ranger includes a host of safety features including a high-voltage LED and beeper, a continuity warning, push butTon non-contact voltage (NCV), a lead holder with detachable leads and alligator probe tips for easy one-handed testing. As far as ranges go, it has temperature, capacitance, microamps DC for flame diode tests and everyday electrical ranges for HVACR

Fieldpiece Instruments SC440

Fieldpiece Instruments SC480 Wireless Clamp Meter True RMS Compatible with Job Link mobile app

Fieldpiece Instruments SC480

Fieldpiece Instruments The SDMN5 is a portable, rugged dual-port manometer designed especially for HVACR field service technicians. Measures gas pressure, static pressure and pressure differential. The SDMN5 includes a zero adjust button of the face of the meter, a rugged rubber boot, a magnet on the back for hanging the meter during service, and the Auto Power-Off (APO) function conserves battery life. The SDMN5 measures pressure between -6inWC and 6inWC ("es of water column) and -15. to 15. mBar. The SDMN5 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements using the resolution mode of .1 in WC or .1 mBar. Includes 3/16 to 5/16 in adapter for measuring gas inlet and outlet pressures. The SDMN5 evolved as a result of testing pressures in the field for 2 years. Its range and resolution allow you to measure the HVAC applications you run into everyday in HVAC/R field service. Measure gas pressure on the inlet and outlets with the standard 3/16 in fittings or the included adapters for 5/16 in ports, take static pressure measurements across a blower and get the pressure differential with the push of a button to check drafts. Whether you're holding the ergonomic standalone shape in your hand or hang the SDMN5 on the unit with the magnetic hanger to fill out a work order, the SDMN5 make HVAC/R field service easier and faster, with less fatigue than the other guys.

Measures duct pressures to balance air flow
• Resolution down to .1" WC for static pressure measurement
• .1" WC resolution
• 15 min auto power off
• Over range - OL or -OL is displayed
• 2 hr battery life with low battery LED indicator on displayed
• Battery - single standard 9 volt, NEDA 164, JIS 6P, IEC 6F22
• Compatible media - dry and non-corrosive gases
• SDMN5 Dual-Port Manometer, 2-3/16" Tubes with Brass Fittings, RMA316 2-3/16 - 5/16" Tube Adapters, 9 volt Battery (Installed), Operator's Manual, (2) 5/16" Adapters for Measuring Inlet and Outlet Pressures
  
  

  Fieldpiece Instruments SDMN5

Fieldpiece Instruments SRS3 Heavy Duty Premium Performance Wireless Fieldpiece's SRS2C Wireless Refrigerant Scale is the only scale of its kind. The SRS2C delivers accurate measurements in a heavy duty design and eliminates clumsy wires that normally connect the display to the scale platform. The SRS2C features a wireless remote with a bright blue backlight and a flip-up magnetic hat for easy reading. The heavy duty platform is constructed of solid aluminum with rugged rubber bumpers. A recessed tank cradle and diamond plate pad hold refrigerant cylinders firmly. The remote stores conveniently in the bottom of the platform. The SRS2C features push butTon zeroing (tare) and syncing between the remote and the platform and a 33 feet range.

Fieldpiece Instruments SRS3

Fieldpiece Instruments this newly designed SPK2 folding pocket thermometer is great for taking quick air temperatures. It fits directly in your pocket so you're ready for common temperature checking. The folding rod has a hanging hook so you can easily hang it in a duct or on a grille. The large display shows min/max/hold, has measurements in both fahrenheit and celsius, and has a low battery indicator. It also quickly calculates T1-T2, as well as features an auto power off function to save battery power on it's already phenomenal 8000 hr of battery life on one single AA battery.

Hang on air registers or duct walls
• Large display
• Rod folds into body
• Auto off after 15 min
• Measuring range -58 to 392 deg F
  
  

  Fieldpiece Instruments SPK2

Fieldpiece Instruments SRS1 Refrigerant Scale W/Weight Alarm Convenient Features and Heavy Duty Design

Fieldpiece Instruments SRS1

Fieldpiece Instruments SPK1 pocket knife style thermometer features a sharp tip for punching through flex duct and hangs easily from a vent or thermostat. Pull out the probe rod just like you would a pocket knife. 16 detent position grooves hold the rod at virtually at any angle. The probe rod folds away simply with no cover sleeve to lose. One of our most popular instruments for HVAC/R field service.

Convenient probe tip protection and storage
• Easily fits in shirt pocket
• Easily hangs from vent or register
• Min/Max function
• Hold function
• Auto off after 10 min
  
  

  Fieldpiece Instruments SPK1

Fieldpiece Instruments SRH3 In-Duct Diagnostic Psychrometer, 0 - 100% RH, The SRH3 In-duct Psychrometer is a great tool to properly charge fixed restrictor systems by quickly determining the target superheat, and to help determine optimum airflow across the evaporator with a target evaporator exit temperature test. To assist HVACR professionals get the proper measurements, Fieldpiece engineered this in-duct psychrometer to take measurements in the duct where they are supposed to be taken -- near the evaporator! The 38" telescoping probe's laser etched ruling and flattened edges allows techs to locate proper measurement points within a duct, and ensures that the probe is properly aligned. With the quick sensor it's a snap to determine target superheat, and take target evaporator exit temperature tests

Fieldpiece Instruments SRH3

Fieldpiece Instruments STA2 is a Hot-wire Anemometer built for the HVACR professionals' air balancing needs. The compact probe tip makes measuring air velocity directly in the duct a breeze. It's great for traversing a duct and automatically calculating CFM without the hassle and expense of a bulky hood. The 38" telescoping probe's laser etched ruling and flattened edges allows techs to locate proper measurement points within a duct, and ensures that the probe is properly aligned. This in duct hot-wire anemometer quickly calculates CFM from air velocity and free area. And with the intuitive interface, the STA2 makes it easy to capture the correct data.

Measures air velocity and temperature
• Calculates cfm air volume
• Slim 38" telescoping probe for in duct traversing
• Fast response time
• Dual display for combo of real-time cfm, air velocity or temperature
• Depth and direction indicators
• Minimizes turbulence effect with time/test point averages
• Hands-free testing with stabilizing cone and magnetic hanger
• In-duct air balancing with fast response time
  
  

  Fieldpiece Instruments STA2

Fieldpiece Instruments SSx34 Stand-Alone Superheat and Subcooling Meter LCD Display -40 to 400 Degrees

Fieldpiece Instruments SRL2K7 Infrared Refrigerant Leak Detector Kit, 3.7 Like all of Fieldpiece's test instruments, the SRL2 infrared refrigerant leak detector is designed exclusively to make the HVACR Technician's job easier, faster, safer and more efficient. We set out to develop the best refrigerant leak detector for HVACR. We believe the SRL2 is it. It comes in kit form in a rugged, blow-mold case with all of the extras. The ergonomic design fits naturally in your hand. The ruggedized construction stands up to abuse most other leak detectors can't handle. The eight-hour battery life lets you work all day before recharging and the included vehicle and wall chargers help you during overtime. The mute and peak functions allow you to work the way you want to work. The magnetic hanger helps keep the detector out of the way when repairing a leak, but visible enough so you won't leave it on the job.

Fieldpiece Instruments SRL2K7