Home  > NORTEK GLOBAL (INTERTHERM)(x)
View:
Frigidaire P7RE-036K Polyester Urethane Galvanized Steel Round Duct Single Package Air Conditioner, 36000 BTU/hr, 3 ton, 208 - 230 VAC, 60 Hz, 1 PH
  • The P7 series single packaged air conditioners are high efficiency self contained cooling units that can be installed on a slab
  • Quality compressor - state of the art compressor is standard equipment
  • High pressure switches ensure long compressor life
  • Micro-channel coils both indoor and outdoor all aluminum coils are designed to optimize heat transfer, minimize size and cost and increase durability and reliability, eliminates corrosion
  • ECM blower motor fixed torque energy efficient brushless DC ECM motor
  • Permanently lubricated condenser motor - a heavy-duty PSC motor for long lasting reliability and quiet operation
  • Low voltage transformer - includes 3 amp fuse to protect low voltage circuit
  • Liquid line filter drier factory installed at a convenient location for service
  • Designed using galvanized steel with a polyester urethane coat finish, 950 hr salt spray finish is 1.5 mil thick and resists corrosion 50% better than comparable units
  • Compact footprint and profile make the P7 series easy to install and transport
  • 0 Inch clearance to combustibles on duct side of the unit allows for installations in tight areas
  • Wire guard coated with earth friendly epoxy and plastic mesh hail guard that will never rust and protects the units coil from being damaged
  • Raised base pan allows water to drain away from the unit
  • Easy compressor and control access designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from side of the unit
  • Easy access to the evaporator coil for cleaning, blower assembly removal and general maintenance
  • Drain trap design optimizes drainage capabilities
  • Removable top grille assembly - allows ease of service to the fan motor
  • Original design
Item#:
P7RE-036K
Manufacturer Item:
922414
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Nortek 904106 Furnace Vent Transition Kit for M3RL Series Furnaces
Item#:
904106
Manufacturer Item:
904106
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Miller CB-200A Cottage Base for CMF, MGC, MOC, AGC Furnace
  • Base is perfect for when there is no duct work available
Item#:
CB200
Manufacturer Item:
901696
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Nortek 911969A Evaporator Coil Box For M1 Series Furnaces, 20 Inch W x 20
Item#:
911969A
Manufacturer Item:
911969A
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Nortek 103947002 Gas Vent Pipe, 4 Inch, 28 Inch L
  • Chimney should be installed so the bottom extends below the ceiling
  • Then the pipe slides inside the chimney and connects to the furnace
Item#:
103947002
Manufacturer Item:
103947002
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Maytag CMF Housing Oil Furnace, 80% AFUE, 75000 BTU/hr Input, 60000 BTU/hr Output
  • 3-speed custom fit and painted blower for efficient, quiet operation
  • Multi firing technology in gas and oil burner
  • Resized auxiliary limit switch
  • 18 Inch width for tight replacement
Item#:
CMF280PO
Manufacturer Item:
CMF280PO
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Nortek E6EB-015H A/C Ready 4-Speed Electric Furnace, 53000 BTU/hr, 240 VAC , 15.4 watt The E6 series furnace is designed for all sizes of manufactured and modular homes. These units incorporate reliability and low maintenance. Units may be installed free standing in a utility room or enclosed in an alcove or closet. E6 series furnaces are A/C ready, with multiple blower combinations for cooling requirements.
  • Easy open door: secures the door firmly for transit, yet allows easy removal for access
  • Effective air filter: universal disposable filter is readily available and simple to replace
  • Nichrome heating elements - provide long lasting, efficient heating
  • Appliance quality door protects against rust and other corrosion, baked enamel finish allows for easy cleaning
  • Fully insulated cabinet: insures minimized heat loss and quiet operation
  • Safety and dependability: auto reset controls protect unit's electrical circuitry and helps ensure trouble free performance, built-in circuit breakers for extra safety
  • Adaptable: unit can be adapted to provide dependable heating in either downflow or upflow mode
  • Versatile - works with self-contained or split system air conditioners or heat pumps
  • Heating relays: provide quiet operation
  • Control board: eliminates need for additional cooling relay kit
  • Full line of accessories to meet many difficult applications The E6 series furnace is designed for all sizes of manufactured and modular homes. These units incorporate reliability and low maintenance. Units may be installed free standing in a utility room or enclosed in an alcove or closet. E6 series furnaces are A/C ready, with multiple blower combinations for cooling requirements.
Item#:
E6EB-015H
Manufacturer Item:
E6EB-015H
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Nortek 902095 Automatic Shut Off Damper for Use with CMF Series Downflow Furnace
Item#:
902095
Manufacturer Item:
902095
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Frigidaire P7RE-030K Polyester Urethane Galvanized Steel Round Duct Single Package Air Conditioner, 30000 BTU/hr, 2.5 ton, 208 - 230 VAC, 60 Hz, 1 PH
  • The P7 series single packaged air conditioners are high efficiency self contained cooling units that can be installed on a slab
  • Quality compressor - state of the art compressor is standard equipment
  • High pressure switches ensure long compressor life
  • Micro-channel coils both indoor and outdoor all aluminum coils are designed to optimize heat transfer, minimize size and cost and increase durability and reliability, eliminates corrosion
  • ECM blower motor fixed torque energy efficient brushless DC ECM motor
  • Permanently lubricated condenser motor - a heavy-duty PSC motor for long lasting reliability and quiet operation
  • Low voltage transformer - includes 3 amp fuse to protect low voltage circuit
  • Liquid line filter drier factory installed at a convenient location for service
  • Designed using galvanized steel with a polyester urethane coat finish, 950 hr salt spray finish is 1.5 mil thick and resists corrosion 50% better than comparable units
  • Compact footprint and profile make the P7 series easy to install and transport
  • 0 Inch clearance to combustibles on duct side of the unit allows for installations in tight areas
  • Wire guard coated with earth friendly epoxy and plastic mesh hail guard that will never rust and protects the units coil from being damaged
  • Raised base pan allows water to drain away from the unit
  • Easy compressor and control access designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from side of the unit
  • Easy access to the evaporator coil for cleaning, blower assembly removal and general maintenance
  • Drain trap design optimizes drainage capabilities
  • Removable top grille assembly - allows ease of service to the fan motor
  • Original design
Item#:
P7RE-030K
Manufacturer Item:
922413
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Nortek 661135 Inshot Burner for Use with M7RL-045A/060A/072A 1-Stage Condensing Downflow Gas Furnace
Item#:
661135
Manufacturer Item:
661135
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Nortek 1017992 1 PH Cooling Upflow/Downflow Electric Furnace, 240 VAC ,
Item#:
E6EB-012H
Manufacturer Item:
1017992
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Maytag M5SB-086A-AW Baked Enamel Housing Oil Furnace, 83% AFUE, 120 VAC, 86000 BTU/hr Input, 73000 BTU/hr Output, 670 - 1090 cfm without Coil, 660 - 990 cfm with Coil
  • Vents exhaust gas directly outdoors and draws in 100% outside air for the burner
  • Secures the door firmly for transit, yet allows easy removal for access
  • From 2 - 5 tons A/C ready
  • Room air is cleaner with this permanent washable filter
  • Delivers optimum heat transfer with low air resistance
  • Protects against rust and other corrosion
  • Baked enamel finish allows for easy cleaning
  • Insures minimized heat loss and quiet operation
  • With uniform flame pattern extends life of heat exchanger
  • Incorporates high efficiency, reliability, and low maintenance
  • Units may be installed free standing in a utility room or enclosed in an alcove or closet
  • M5 series furnaces are available in A/C adaptable or A/C ready, with or without coil cavity box, multiple blower combinations for cooling requirements, and many burner options
Item#:
M5SB086AAW
Manufacturer Item:
921209
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
View: