RG275H6N

• Intelligent gas control with proven millivolt powered technology and built-in piezo igniter
• Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
• Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
• An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
• Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
• An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas) is fused to the steel surface by firing at a temperature of over 1600 deg F
• Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies, and jacket rigidity
• Temperature and pressure relief valve installed
• Durable tamper proof design low restriction brass drain valve
• Protective magnesium anode rod
• Factory installed heat traps
• Factory installed hydrojet total performance system
• Advanced screenlok technology flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater
• Flashing green LED provides positive indication that pilot is on
• High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
• Pedestal base
• No regular cleaning of air inlet openings or flame arrestor is required under normal conditions
• 6 years limited tank and component parts warranty
• 3 x 4""snap lock" draft diverter
• Less than 40 ng/J NOx emissions
• Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow

RG250T6X

RG250T6X

• Intelligent gas control with proven millivolt powered technology and built-in piezo igniter
• Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
• Micro-processor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
• An exclusive green LED light prompts the installer during start-up and provides 10-different diagnostic codes to assist in troubleshooting
• Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
• An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas) is fused to the steel surface by firing at a temperature of over 1600 deg F
• Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
• Temperature and pressure relief valve included
• Durable tamper proof design low restriction brass drain valve
• Protective magnesium anode rods
• Factory installed heat traps
• Factory installed Hydrojet total performance system
• Advanced ScreenLok technology flame arrestor is designed to prevent ignition of flammable vapors outside of the water heater
• Flashing green LED provides positive indication that pilot is on
• High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
• Pedestal base
• No regular cleaning of air inlet openings or flame arrestor is required under normal conditions
• 6 years limited tank and component parts warranty
• 3 x 4""snap lock" draft diverter
• Less than 40 ng/J NOx emissions
• Proven and reliable bi-metallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow

Bradford White Water Heaters RG250T6N

RG250T6N

• Intelligent gas control with proven millivolt powered technology
• Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
• Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
• An exclusive green LED light prompts the installer during start-up and provides 10-different diagnostic codes to assist in troubleshooting
• Flashing green LED provides positive indication that pilot is on
• High-strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
• Advanced Screenlok technology flame arrestor is designed to prevent ignition of flammable vapors outside of the water heater
• Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow
• Maintenance free - no regular cleaning of air inlet openings or flame arrestor is required under normal conditions
• Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
• Factory installed Hydrojet total performance system
• Tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
• Non-CFC foam insulation covers the sides and top of tank, reducing the amount of heat loss
• Pedestal base, factory installed heat traps
• Protective magnesium anode rods
• 3 x 4""snap lock" draft diverter
• Temperature and pressure relief valve installed
• Durable tamper-proof design low restriction brass drain valve
• 6 or 10 years limited tank and component parts warranties

RG250S6N

RG250S6N

• Intelligent gas control with proven millivolt powered technology and built-in piezo igniter
• Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
• Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
• An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
• Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
• An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas) is fused to the steel surface by firing at a temperature of over 1600 deg F
• Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies, and jacket rigidity
• Temperature and pressure relief valve installed
• Durable tamper proof design low restriction brass drain valve
• Protective magnesium anode rod
• Factory installed heat traps
• Factory installed hydrojet total performance system
• Advanced screenlok technology flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater
• Flashing green LED provides positive indication that pilot is on
• High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
• Pedestal base
• No regular cleaning of air inlet openings or flame arrestor is required under normal conditions
• 6 years limited tank and component parts warranty
• 3 x 4""snap lock" draft diverter
• Less than 40 ng/J NOx emissions
• Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow

RG240T6X

RG240T6X

• Intelligent gas control with proven millivolt powered technology
• Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
• Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
• An exclusive green LED light prompts the installer during start-up and provides 10-different diagnostic codes to assist in troubleshooting
• Flashing green LED provides positive indication that pilot is on
• High-strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
• Advanced Screenlok® technology flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater
• Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow
• Maintenance free - no regular cleaning of air inlet openings or flame arrestor is required under normal conditions
• Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
• Factory-installed Hydrojet® total performance system
• Tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
• Non-CFC foam insulation covers the sides and top of tank, reducing the amount of heat loss
• Pedestal base, factory installed heat traps
• Protective magnesium anode rod
• 3 x 4""snap lock" draft diverter
• Temperature and pressure relief valve included
• Durable tamper-proof design low restriction brass drain valve
• 6 or 10 years limited tank and component parts warranties

Bradford White Water Heaters RG240T6N

RG240T6N

• Intelligent gas control with proven millivolt powered technology
• Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
• Micro-processor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
• An exclusive green LED light prompts the installer during start-up and provides 1 -different diagnostic codes to assist in troubleshooting
• Flashing green LED provides positive indication that pilot is on
• High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
• Advanced ScreenLok technology flame arrestor is designed to prevent ignition of flammable vapors outside of the water heater
• Proven and reliable bi-metallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow
• Maintenance free - no regular cleaning of air inlet openings or flame arrestor is required under normal conditions
• Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
• Factory installed Hydrojet total performance system
• Tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
• Non-CFC foam insulation covers the sides and top of tank, reducing the amount of heat loss
• Pedestal base, factory installed heat traps
• Protective magnesium anode rods
• 3 x 4""snap lock" draft diverter
• Temperature and pressure relief valve included
• Durable tamper proof design low restriction brass drain valve
• 6 or 1 years limited tank and component parts warranty

RG240S6X

RG240S6X

• Intelligent gas control with proven millivolt powered technology
• Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
• Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
• An exclusive green LED light prompts the installer during start-up and provides 10-different diagnostic codes to assist in troubleshooting
• Flashing green LED provides positive indication that pilot is on
• High-strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
• Advanced Screenlok® technology flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater
• Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow
• Maintenance free - no regular cleaning of air inlet openings or flame arrestor is required under normal conditions
• Sight window offers a view into the combustion chamber to observe the operation of the pilot and burner
• Factory-installed Hydrojet® total performance system
• Tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
• Non-CFC foam insulation covers the sides and top of tank, reducing the amount of heat loss
• Pedestal base, factory installed heat traps
• Protective magnesium anode rod
• 3 x 4""snap lock" draft diverter
• Temperature and pressure relief valve included
• Durable tamper-proof design low restriction brass drain valve
• 6 or 10 years limited tank and component parts warranties

RG240S6N

Bradford White Water Heaters RG240S6N

Bradford White 415-46719-00F

415-46719-00F

RE240LN6

RE240LN6

• Transfers heat directly and efficiently to the water, screw-in style
• An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas) is fused to the steel surface by firing at a temperature of over 1600 deg F
• Protective magnesium anode rods provides added protection against corrosion for long, trouble-free service
• Factory installed heat traps design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
• Factory installed Hydrojet total performance system
• Durable tamper proof design low restriction brass drain valve
• Non-simultaneous operation, these heaters are wired inter-locking
• 6 or 10 years limited tank and component parts warranty
• Temperature and pressure relief valve included
• Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety
• Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity

Bradford White Water Heaters RE340S6-1NCWW

RE340S6-1NCWW