Home  > LEGEND VALVE(x)
View:
Legend Valve T-595NL Lead Free Chrome-Plated Forged Brass Ball-Type Quarter-Turn Supply Stop Angle Valve, 5/8 x 1/4", OD Compression
  • Self-cleaning ball valve design resists mineral and scale build-up, assuring positive shutoff and re-opening
  • The ball-seat operation and dual o-ring stem seal features, out-perform traditional multi-turn stop designs
  • Plated carbon steel handle screw, brass stem, compression ferrule, nut, ball and end adapter, NBR stem o-ring
Item#:
114-614NL
Manufacturer Item:
T-595L 114-614NL
Manufacturer:
LEGEND VALVE
All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Gallonvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Gallonvanized steel allows us to create fittings that are rust-resistant and durable.


Southwark 1005430 Elbow 90 Degree Adjustable 4" 30 Gauge

Legend Valve 111-205

Item#:
111-205
Manufacturer Item:
111-205
Manufacturer:
LEGEND VALVE
All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable.


Southwark 1005526 Elbow 90 Degree Adjustable 5" 28 Gauge

Legend Valve 111-206

Item#:
111-206
Manufacturer Item:
111-206
Manufacturer:
LEGEND VALVE
Bock Water Heaters SideKick 40SK Powder Coated Steel Indirect Water Heater, 38 Gallon, 8 gpm, 89000 BTU
  • Single-wall full throat 1-1/2" diameter internal coil heat exchanger
  • Factory installed aquastat on all models
  • Factory installed temperature and pressure relief valve and brass drain valve
  • Robust construction - inner tank is precision built from high quality steel and repetitive pressure testing assures the highest quality
  • All steel construction with an environmentally-friendly powder coat finish providing a tough and attractive exterior
  • Cobalt-enriched porcelain enamel glass lined tank and coil are highly resistant to aggressive water not susceptible to damage due to the presence of chloride in the water
  • Ecomate insulation does not contribute to global warming
  • Two magnesium anode rods - inhibit corrosion and maximize tank life. Electrolysis attacks the anode rods, not the tank
  • Factory installed dielectric nipples on boiler connections - provides greater insulating protection

Amtrol Parts B135-81

Item#:
B135-81
Manufacturer Item:
444
Manufacturer:
LEGEND VALVE
Bock Water Heaters SideKick 30SK Powder Coated Steel Indirect Water Heater, 30 Gallon, 8 gpm, 56000 BTU
  • Single-wall full throat 1-1/2" diameter internal coil heat exchanger
  • Factory installed aquastat on all models
  • Factory installed temperature and pressure relief valve and brass drain valve
  • Robust construction - inner tank is precision built from high quality steel and repetitive pressure testing assures the highest quality
  • All steel construction with an environmentally-friendly powder coat finish providing a tough and attractive exterior
  • Cobalt-enriched porcelain enamel glass lined tank and coil are highly resistant to aggressive water not susceptible to damage due to the presence of chloride in the water
  • Ecomate insulation does not contribute to global warming
  • Two magnesium anode rods - inhibit corrosion and maximize tank life. Electrolysis attacks the anode rods, not the tank
  • Factory installed dielectric nipples on boiler connections - provides greater insulating protection

Amtrol Parts B135-80

Item#:
B135-80
Manufacturer Item:
443
Manufacturer:
LEGEND VALVE
Legend Valve Blue Top T-3100 1-Piece Gas Ball Valve, 1/2", FNPT, Forged Brass, Domestic
  • Patented one piece forged brass body eliminates the possibility of seam leaks common to two-piece body designs
  • Equipped with an integral 1/8" NPT tapped manometer test port and plug, eliminating the need for a separate test port fitting and shut-off valve near the appliance pilot assembly
  • Chrome plated ball and soft seats resist contamination build-up and offer a positive seal in low- or moderate-pressure gas applications
  • Quarter-turn, ball-type, forged brass design is more compact and superior to traditional cast bronze or cast iron gas cocks
  • The 175 psi pressure rating permits high-pressure air tests, without the grease-seal blowout common to plug-type gas cocks
  • Not suitable for steam service
  • CSA certified for use with natural, manufactured, mixed, liquid petroleum and LP gas/air mixtures
  • CSA certified 3-88 for use in 2 or 5 lb house piping systems
  • Side taps
Sid Harvey Item #:102-513L: Replaces Part #:'s : 102-513
Item#:
102-513L
Manufacturer Item:
102-513
Manufacturer:
LEGEND VALVE
Legend Valve T-3000 Forged Brass 2-Piece 1/4 Turn Gas Ball Valve, 3/8", Flare
  • Chrome-plated ball and soft seats resist contamination build-up and offer a positive seal in low- or moderate-pressure gas applications
  • 1/4-turn, ball type, forged brass design is more compact and superior to traditional cast bronze or cast iron gas cocks
  • The 175 psi pressure rating permits high-pressure air tests, without the grease-seal blowout common to plug-type gas cocks
  • 8-different configurations, to accommodate all gas connection types
  • Synthetic fiber thrust washer
  • Forged brass stem retainer bushing
  • Phosphor-bronze wire stem retainer clip
  • Zinc plate steel handle screw
  • Commercial grade, die-cast aluminum coated handle
Item#:
102-312
Manufacturer Item:
102-312
Manufacturer:
LEGEND VALVE
Legend Valve T-3100 Forged Brass Handle 1-Piece 1/4 Turn Gas Ball Valve with Side Tap, 3/4", FNPT
  • Patented 1-piece forged brass body eliminates the possibility of seam leaks common to 2-piece body designs
  • Chrome plated ball and soft seats resist contamination build-up and offer a positive seal in low- or moderate-pressure gas applications
  • 1/4-turn, ball type, forged brass design is more compact and superior to traditional cast bronze or cast iron gas cocks
  • The 175 psi pressure rating permits high-pressure air tests, without the grease-seal blowout common to plug-type gas cocks
  • 2-different configurations, to accommodate all gas connection types
  • Equipped with an integral 1/8" NPT tapped manometer test port and plug, eliminating the need for a separate test port fitting and shut-off valve near the appliance pilot assembly
  • Commercial grade synthetic fiber thrust washer
  • ASTM B-124 UNS C37700 forged brass stem retainer bushing and test port plug
  • ASTM B-159 phosphor bronze wire stem retainer clip
  • ANSI/ASME B18.2.1 IFI C18 zinc plated steel handle screw
  • Commercial grade, die-cast aluminum coated handle
  • Type 7PB496 ASTM D-2000 nitrile (NBR) rubber stem o-ring
Sid Harvey Item #:102-514L: Replaces Part #:'s : 102-514
Item#:
102-514L
Manufacturer Item:
102-514
Manufacturer:
LEGEND VALVE
Legend Valve 107-174 Cast Brass Sillcock Valve, 1/2 x 3/4", FNPT x MGHT
  • Full pattern body, stem and hand wheel construction
  • Electric induction furnace casting process optimizes molten brass temperatures, resulting in superior cast body and bonnet components
  • Equipped with a stem packing and packing nut design, which are superior to packless-bonnet stem seal designs
  • AISI 1010 cadmium plated steel nut handle fastener
  • Commercial grade NBR (buna-N) rubber stem packing and seat washer, AISI grade 304 stainless steel seat retaining screw
  • ASTM B16 C36000 brass packing nut, ASTM B584 C85700 cast brass bonnet
Item#:
107-174
Manufacturer Item:
107-174
Manufacturer:
LEGEND VALVE
Legend Valve 107-175 Cast Brass Sillcock Valve, 3/4", FNPT x MGHT
  • Full pattern body, stem and hand wheel construction
  • Electric induction furnace casting process optimizes molten brass temperatures, resulting in superior cast body and bonnet components
  • Equipped with a stem packing and packing nut design, which are superior to packless-bonnet stem seal designs
  • AISI 1010 cadmium plated steel nut handle fastener
  • Commercial grade NBR (buna-N) rubber stem packing and seat washer, AISI grade 304 stainless steel seat retaining screw
  • ASTM B16 C36000 brass packing nut, ASTM B584 C85700 cast brass bonnet
  • 3/4" GHT (garden hose) outlets accept 3/4" hose-thread-mounted vacuum breakers
Item#:
107-175
Manufacturer Item:
107-175
Manufacturer:
LEGEND VALVE
Legend Valve 110-114 Bronze Radiator Angle Valve, 3/4", FNPT x MNPT
  • Rising stem
  • Each valve is tested twice air under water, in the open and closed position
  • Bronze bonnet, stem, tailpiece, union nut, steel screw handle, brass packing nut, teflon packing, bronze and EPDM disc
Sid Harvey Item #:110114: Replaces Part #:'s : 4294
Item#:
110114
Manufacturer Item:
110-114
Manufacturer:
LEGEND VALVE
Legend Valve 110-164 Bronze Heavy-Duty Union Elbow, 3/4", FNPT x Male
  • 15 psi saturated steam
  • T-433 convector steam angle valve
  • Screw-over bonnet
  • Rising stem
  • Composition disc
Sid Harvey Item #:110-164: Replaces Part #:'s : 4302
Item#:
110-164
Manufacturer Item:
110-164
Manufacturer:
LEGEND VALVE
View: