Home  > MARSHALL EXCELSIOR CO.(x)
View:
Marshall Excelsior ME1669-20 Annealed Copper Pigtail, 1/4 Inch, Male Hard Nose POL x 1/4 Inch MNPT, 20 Inch L
  • 7/8 Inch nut
  • Long nipple
  • 1/4 Inch tube have a pull test rating of 500 lb
Sid Harvey Item #:1669-20: Replaces Part #:'s : 912JS20
Item#:
1669-20
Manufacturer Item:
ME1669-20
Manufacturer:
MARSHALL EXCELSIOR CO.
Bergquist 1701B Brass Manifold Tee Block with 7/8 Inch Hex Nut
  • Multiple cylinder tee block manifolds are designed to connect multiple cylinders to automatic changeover regulators.
  • These manifolds have no check and are primarily for systems requiring more than one cylinder to be in operation at a time
  • The appropriate pigtail must be used to connect the manifold inlet to the service cylinder valve
Item#:
1701B
Manufacturer Item:
1701B
Manufacturer:
MARSHALL EXCELSIOR CO.
Marshall Excelsior ME1662-20 Annealed Copper Pigtail, 1/4 Inch, Male Hard Nose POL, 20 Inch L
  • 7/8 Inch nut
  • Long nipple
  • 1/4 Inch tube have a pull test rating of 500 lb
Sid Harvey Item #:1662-20: Replaces Part #:'s : 912PS20
Item#:
1662-20
Manufacturer Item:
ME1662-20
Manufacturer:
MARSHALL EXCELSIOR CO.
Marshall Excelsior ME1662-48 Annealed Copper Pigtail, 1/4 Inch, Male Hard Nose POL, 48 Inch L
  • 7/8 Inch nut
  • Long nipple
  • 1/4 Inch tube have a pull test rating of 500 lb
Sid Harvey Item #:1662-48: Replaces Part #:'s : 912PS48
Item#:
1662-48
Manufacturer Item:
ME1662-48
Manufacturer:
MARSHALL EXCELSIOR CO.
Bergquist 1703B Brass Manifold Tee Block with 1-1/8 Inch Hex Nut
  • Multiple cylinder tee block manifolds are designed to connect multiple cylinders to automatic changeover regulators.
  • These manifolds have no check and are primarily for systems requiring more than one cylinder to be in operation at a time
  • The appropriate pigtail must be used to connect the manifold inlet to the service cylinder valve
Item#:
1703B
Manufacturer Item:
ME1702B
Manufacturer:
MARSHALL EXCELSIOR CO.
Integral 2-stage regulators combine the first and second stage regulator set-up into one convenient unit converting tank pressure to 11 Inch WC. All MEC integral 2-stage domestic regulators are gray indicating low outlet pressure. Integral 2-stage regulators are recommended for installations with short piping distances, but provide the same advantages of 2-stage regulator on with a single unit. All MEC integral 2-stage regulator vent have tapped ports and our exclusive E-Z Grip screens located over the outlet. The MEGR-1232 series offer optimal relief performance that well exceeds UL test requirements providing over pressure protection of no more than 2 psi downstream pressure.
  • Patent pending anti freeze heat transfer fins
  • Fluorocarbon seat, fabric reinforced NBR/molded lip o-ring bonnet/body seal diaphragm
  • Internal spring loaded relief
  • Standard 3-1/2 Inch center mounting holes
Item#:
MEGR-1232-BBF
Manufacturer Item:
MEGR1232-BBF
Manufacturer:
MARSHALL EXCELSIOR CO.
Offers a compact first stage regulator design perfect for tight applications such as underground tank domes. They feature an adjustment range from 9 - 12 psig (factory set at 10 psig), stainless steel internal components, fluorocarbon (FKM) seat discs, molded lip fabric reinforced diaphragms and large aluminum precision machined orifice to minimize freeze ups while providing superior downstream regulation and maximum corrosion resistance against weather or contaminated gas. These first stage regulators are used to reduce LP gas tank pressures for a second stage regulator (normally 10 psig). All MEC first stage regulators are red indicating high outlet pressure. First stage regulator vents have 3/4 Inch FNPT tapped ports and E-Z grip screens located over the outlet. Both the MEGR-1122H and the MEGR-1622H series offer optimal relief performance that well exceeds UL test requirements providing double failure overpressure protection when used with MEC MEGR-1622, MEGR-1642 and MEGR-1652 series second stage regulators. All MEC Excela-Flo domestic regulators feature a 25 years recommended replacement life and our exclusive tear away leak check adhesive sticker.
  • Fabric reinforced NBR/molded lip o-ring bonnet/body seal diaphragm
  • Internal relief - spring loaded relief type
  • Standard 3-1/2 Inch center mounting holes
  • #54 orifice 1/8 Inch FNPT plugged (2) pressure taps
  • Molded in adjustment cap - black (full size), gray (compact) relief travel stop
  • 10 Inch WC outlet set point
  • 3/8 Inch FNPT vent port
Item#:
MEGR-1122H-AAJ
Manufacturer Item:
MEGR-1122H-AAJ
Manufacturer:
MARSHALL EXCELSIOR CO.
Bergquist VB1 Type B Test Tap Valve, for use with SKVB Gauge
Item#:
VB1
Manufacturer Item:
VB1
Manufacturer:
MARSHALL EXCELSIOR CO.
Fisher P100C Aluminum Bowtie Mounting Bracket for R622, R632, R642 and R622H Regulators
Item#:
1776-25
Manufacturer Item:
P100C
Manufacturer:
MARSHALL EXCELSIOR CO.
Offers all of the same features as the compact MEGR-1122 series but in a full size, high capacity version. Our full size second stage regulators have a large fabric reinforced diaphragm for superior downstream regulation, heavy duty wrench flats, and a large 3/4 Inch FNPT tapped drip lip vent to help prevent relief valve blockage. The MEGR-1622 series have both the inlet and outlet in line where the MEGR-1652 series have a rear discharge back mount outlet for convenient wall mount applications.
  • Fabric reinforced NBR/molded lip o-ring bonnet/body seal diaphragm
  • Internal relief - spring loaded relief type
  • Standard 3-1/2 Inch center mounting holes
  • #54 orifice 1/8 Inch FNPT plugged (2) pressure taps
  • Relief travel stop - molded in adjustment black cap
  • 11 Inch WC outlet set point
  • Back mount configuration
Item#:
MEGR-1652-DFF
Manufacturer Item:
MEGR-1652-DFF
Manufacturer:
MARSHALL EXCELSIOR CO.
Marshall Excelsior Excela-Flo MEGR-1232-HBF Die-Cast Aluminum 2-Stage Integral 2-stage regulators combine the 1 and 2-stage regulator set-up into one convenient unit converting tank pressure to 11 Inch WC. All MEC integral 2-stage domestic regulators are gray indicating low outlet pressure. Integral 2-stage regulators are recommended for installations with short piping distances, but provide the same advantages of 2-stage regulator on with a single unit. All MEC integral 2-stage regulator vent have tapped ports and our exclusive E-Z Grip screens located over the outlet. The MEGR-1232 series offer optimal relief performance that well exceeds UL test requirements providing over pressure protection of no more than 2 psi downstream pressure.
Item#:
MEGR-1232-HBF
Manufacturer Item:
MEGR-1232-HBF
Manufacturer:
MARSHALL EXCELSIOR CO.
Bergquist Kosan Excela-Flo MEGR-1622-DFF Die-Cast Aluminum 2-Stage Full Size Domestic LP Gas Regulator, 3/4 Inch, FNPT, 10 psig, 1300000 BTU/hr
  • Fabric reinforced (NBR) molded lip o-ring bonnet/body seal diaphragm
  • Heavy-duty wrench flats and a large 3/4 Inch FNPT tapped drip lip vent to help prevent relief valve blockage
  • Spring loaded internal relief
  • Standard 3-1/2 Inch center mounting holes
  • #54 orifice 1/8 Inch FNPT plugged (2) pressure taps
  • Relief travel stop - Molded in adjustment black cap
  • Green powder coating Exterior and interior finish
Item#:
MEGR-1622-DFF
Manufacturer Item:
MEGR-1622-DFF
Manufacturer:
MARSHALL EXCELSIOR CO.
View: