Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

Rinnai RL75IP Propane Gas Indoor Forced Combustion Tankless Water Heater, 7.5 gpm, 10300 - 180000 BTU/hr

• Temperature controlled, continuous flow, gas hot water system
• Water flow sensor, electronic water control device and fixed by-pass
• Rinnai Circ-Logic - recirculation program cycles external pump
• Water temperature control - simulation feed forward and feedback
• Controller cable - non-polarized 2-core cable, minimum 22 AWG wire
• Safety devices: flame failure - flame rod, boiling protection, combustion fan rpm check, over current - glass fuse, remaining flame (OHS), thermal fuse, automatic frost protection
• Limited warranty - 12 years heat exchanger for residential, 10 years for residential and space heating, 5 years for commercial, 5 years all other parts, 1 year labor

Thermoplastic Elastomer High Pressure Oil and Gas Hose, 1/4 Inch x 350 - 700 feet Parflex HP hose has a blue, perforated elastomeric cover and is designed for a wide range of hydraulic and pneumatic applications. HP8 has an orange, non-perforated cover and is designed for electrically non-conductive hydraulic applications. HP8 hoses meet SAE J517 specifications for less than 50 micro amps electrical current leakage after aging and test at 75000 volts per foot.

Designed to prevent tampering, product theft and/or accidental discharge of product. This product is perfect for any size tank valve with a POL connection or 1-3/4 Inch Acme connection or gas plumbing, such as a riser. To install, securely screw the plug or cap to the valving or plumbing using the appropriate wrench. Snap locking mechanism into place over plug or cap. Locking mechanism will cover the installation hex or knurl and swivel freely until key is inserted and the lock is removed.

• All brass body construction for maximum durability
• Locking mechanism and key features durable chrome plating
• Locking mechanism swivels 360 deg when installed to prevent tampering or removal
• Locking mechanism cannot be removed without key
• Universal key for all sizes and styles
• Male soft nose POL thread
• (12) plugs and locks, (1) universal key packaging
• ME530-03 additional key

The twin stage regulator is a regulator consisting of 2-regulation levels, which regulates the inlet pressure, coming from the withdrawal cylinder or tank directly to the inlet pressure of the user appliance. Type 988 TW regulators are designed for type B installations. They are to be used outdoors in correct mounting position with vent-hole turned downwards. In the standard version, type 988 TW regulators are delivered with vent-hole turned in line with to the outlet fitting.

• Straight configuration
• Italian design - engineered for the American market
• Reinforced molded diaphragm and large surface GLT Viton seat disc
• Superior performance, 100% tested - dimensionally inter-changeable
• Lower profile for better dome lid clearance - perfect for under ground tanks
• Screened inlets on all second-stage regulators
• 1/8 Inch pressure taps with #54 orifice on the inlets and outlets of all regulators
• Stainless steel screw and internal linkage assemblies
• Seal on body flange to identify tampering
• All aluminum body and cover, corrosion resistant finish
• 5-year warranty

Bergquist 7327 Brass Hose Ferrule

• Ferrule provides fast and semi-permanent attachment of hose barbs and most low pressure general purpose hoses
• Assure the inside diameter (inside diameter) of the ferrule is large enough to fit over the outside diameter (outside diameter) of the hose
• CDR-35 ribbed

Bergquist 42IF SAE 45 deg Reducing Union, 5/8 x 1/2 Inch, Flared

Excela-Flo Green Powder-Coated Die-Cast Aluminum High Capacity Compact 2-Stage Domestic Gas Regulator, 3/4 Inch FNPT, 700000 BTU/hr Offers a compact second stage regulator design perfect for lower to intermediate BTU applications. They feature an adjustable range from 9.5 13 Inch WC (factory set at 11 Inch WC), stainless steel internal components, fluorocarbon (FKM) seat discs, molded lip fabric reinforced diaphragms and large aluminum precision machined orifices providing superior downstream regulation and maximum corrosion resistance against weather or contaminated gas. The MEGR-1222 Series have both the inlet and outlet in line where the MEGR-1252 series have a rear discharge back mount outlet for convenient wall mount applications.

Bergquist AA16 DOT Cylinder Label, 100/Pack

Bergquist US4E Brass Swivel Union, 3/8 Inch, SAE 45 deg Flare

Bergquist ME571H Internal Swivels High Capacity Adapter, 1-3/4 Inch ACME Female x 1-3/4 Inch ACME Male