Home  > ZSI FOSTER HQ AND CLAMP MFG(x)
|◀ ◀ 1 - 11 of 11 ▶ ▶|
View:

Cushion Clamp 3/4" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    ZSI Foster UX3410

    • Item#:
    UX3410
    Manufacturer Item:
    UX3410
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX3410_Broc

    Cushion Clamp 3/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    ZSI Foster UX3810

    • Item#:
    UX3810
    Manufacturer Item:
    UX3810
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX3810_Broc

    Cushion Clamp 5/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    ZSI Foster UX5810

    • Item#:
    UX5810
    Manufacturer Item:
    UX5810
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX5810_Broc

    Cush-A-Glide Pipe Support 1/2" OD Black

  • Cush-A-Glide is designed for fast installation of copper tube or pipe, and can be easily installed in seconds with fasteners of your choice. Just spread the clamp apart placing it over the top of a tube or pipe and fasten one side. Push in the opposite side to the desired tightness, allowing for expansion and contraction, then fasten the other side.
  • Allows for expansion and contraction of copper tube and pipe
  • Excellent alternative to stainless or galvanized clamps
  • Fits tightly and securely against mounting surfaces
  • Made from trusted high quality TPE material
  • One piece molded split ring design
  • Suitable for indoor or outdoor applications
  • Temperature range of -50°F to 275°F (-45°C to 135°C)
  • Will not rust and prevents and eliminates galvanic corrosion
  • Made in the USA

    ZSI Foster CAGB08

    • Item#:
    CAGB08
    Manufacturer Item:
    CAGB08
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    CAGB08_Broc

    Cush-A-Glide Pipe Support 3/8" OD Black

  • Cush-A-Glide is designed for fast installation of copper tube or pipe, and can be easily installed in seconds with fasteners of your choice. Just spread the clamp apart placing it over the top of a tube or pipe and fasten one side. Push in the opposite side to the desired tightness, allowing for expansion and contraction, then fasten the other side.
  • Allows for expansion and contraction of copper tube and pipe
  • Excellent alternative to stainless or galvanized clamps
  • Fits tightly and securely against mounting surfaces
  • Made from trusted high quality TPE material
  • One piece molded split ring design
  • Suitable for indoor or outdoor applications
  • Temperature range of -50°F to 275°F (-45°C to 135°C)
  • Will not rust and prevents and eliminates galvanic corrosion
  • Made in the USA

    ZSI Foster CAGB06

    • Item#:
    CAGB06
    Manufacturer Item:
    CAGB06
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    CAGB06_Broc

    Cush-A-Glide Pipe Support 5/8" OD Black

  • Cush-A-Glide is designed for fast installation of copper tube or pipe, and can be easily installed in seconds with fasteners of your choice. Just spread the clamp apart placing it over the top of a tube or pipe and fasten one side. Push in the opposite side to the desired tightness, allowing for expansion and contraction, then fasten the other side.
  • Allows for expansion and contraction of copper tube and pipe
  • Excellent alternative to stainless or galvanized clamps
  • Fits tightly and securely against mounting surfaces
  • Made from trusted high quality TPE material
  • One piece molded split ring design
  • Suitable for indoor or outdoor applications
  • Temperature range of -50°F to 275°F (-45°C to 135°C)
  • Will not rust and prevents and eliminates galvanic corrosion
  • Made in the USA

    ZSI Foster CAGB10

    • Item#:
    CAGB10
    Manufacturer Item:
    CAGB10
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    CAGB10_Broc

    Cush-A-Glide Pipe Support 7/8" OD Black

  • Cush-A-Glide is designed for fast installation of copper tube or pipe, and can be easily installed in seconds with fasteners of your choice. Just spread the clamp apart placing it over the top of a tube or pipe and fasten one side. Push in the opposite side to the desired tightness, allowing for expansion and contraction, then fasten the other side.
  • Allows for expansion and contraction of copper tube and pipe
  • Excellent alternative to stainless or galvanized clamps
  • Fits tightly and securely against mounting surfaces
  • Made from trusted high quality TPE material
  • One piece molded split ring design
  • Suitable for indoor or outdoor applications
  • Temperature range of -50°F to 275°F (-45°C to 135°C)
  • Will not rust and prevents and eliminates galvanic corrosion
  • Made in the USA

    ZSI Foster CAGB14

    • Item#:
    CAGB14
    Manufacturer Item:
    CAGB14
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    CAGB14_Broc

    Cush-A-Glide Pipe Support 1-3/8" OD Black

  • Cush-A-Glide is designed for fast installation of copper tube or pipe, and can be easily installed in seconds with fasteners of your choice. Just spread the clamp apart placing it over the top of a tube or pipe and fasten one side. Push in the opposite side to the desired tightness, allowing for expansion and contraction, then fasten the other side.
  • Allows for expansion and contraction of copper tube and pipe
  • Excellent alternative to stainless or galvanized clamps
  • Fits tightly and securely against mounting surfaces
  • Made from trusted high quality TPE material
  • One piece molded split ring design
  • Suitable for indoor or outdoor applications
  • Temperature range of -50°F to 275°F (-45°C to 135°C)
  • Will not rust and prevents and eliminates galvanic corrosion
  • Made in the USA

    ZSI Foster CAGB22

    • Item#:
    CAGB22
    Manufacturer Item:
    CAGB22
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    CAGB22_Broc

    Cush-A-Glide Pipe Support 2-1/8" OD Black

  • Cush-A-Glide is designed for fast installation of copper tube or pipe, and can be easily installed in seconds with fasteners of your choice. Just spread the clamp apart placing it over the top of a tube or pipe and fasten one side. Push in the opposite side to the desired tightness, allowing for expansion and contraction, then fasten the other side.
  • Allows for expansion and contraction of copper tube and pipe
  • Excellent alternative to stainless or galvanized clamps
  • Fits tightly and securely against mounting surfaces
  • Made from trusted high quality TPE material
  • One piece molded split ring design
  • Suitable for indoor or outdoor applications
  • Temperature range of -50°F to 275°F (-45°C to 135°C)
  • Will not rust and prevents and eliminates galvanic corrosion
  • Made in the USA

    ZSI Foster CAGB34

    • Item#:
    CAGB34
    Manufacturer Item:
    CAGB34
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    CAGB34_Broc

    Cushion Block W/Steel Channel 10-7/8" x 13/16"

  • CBN-EX Series
  • Support With Raised Channel
  • CBN-BR Extension Rooftop Supports are perfect for supporting natural gas and refrigeration piping systems, cable tray, electrical conduit, multiple lines, HVAC equipment and many other applications.
  • Standard strut mount pipe clamps are used to secure the pipes. Custom lengths are available upon request.

    ZSI Foster CBN1S

    • Item#:
    CBN1S
    Manufacturer Item:
    CBN1S
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    CBN1S_Broc

    Cushion Clamp 1-1/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location

    ZSI Foster UX11810

    • Item#:
    UX11810
    Manufacturer Item:
    UX11810
    Manufacturer:
    ZSI FOSTER HQ AND CLAMP MFG
     
    UX11810_Broc
    |◀ ◀ 1 - 11 of 11 ▶ ▶|
    View: