Home  > NVENT THERMAL LLC(x)  > (x)
View:
Raychem H612250 Self-Regulating WinterGard Wet Heating Cable, 250 feet, 120 VAC, 6 watt/feet
  • Raychem WinterGard self-regulating heating cables provide convenient, reliable freeze protection for a wide variety of professionally installed residential and commercial water-pipe and roof-and-gutter de-icing applications in nonhazardous areas.
  • Automatically adjust heat output
  • Waterproof polyolefin outer jacket over metal shield
  • 8 watt/feet power output in refrigeration condensate drains at 32 deg F
  • 0.415 Inch width x 0.215 Inch thickness cable
Item#:
H612-250
Manufacturer Item:
H612-250
Manufacturer:
NVENT THERMAL LLC
Raychem WinterGard self-regulating heating cables provide convenient, reliable freeze protection for a wide variety of professionally installed residential and commercial water-pipe and roof-and-gutter de-icing applications in nonhazardous areas.
  • Waterproof polyolefin outer jacket over metal shield
Item#:
H622-250
Manufacturer Item:
H622-250
Manufacturer:
NVENT THERMAL LLC
Pentair Raychem H900 Power Connection Kit for Use with H311, H611, H612, H621 and H622 Wintergard Heating Cables
  • For use in pipe freeze protection and roof and gutter de-icing applications
Item#:
H900
Manufacturer Item:
H900
Manufacturer:
NVENT THERMAL LLC
When compressors operate in cold areas, refrigerant can migrate into the crankcase oil whenever the compressor is not running. On start-up, this can cause excessive motor wear and a loss of refrigeration efficiency. Raychem FreezGard self-regulating crankcase heaters provide reliable peak heating during critical cold periods and unlike conventional constant-wattage heaters, reduce their heating once the compressor starts up or the air temperature rises. Also self-regulating heaters can be safely overlapped and closely spaced without burning out, so one size fits all hermetic compressors up to 5 hp that are 40 Inch or less in circumference.
  • Prolongs motor life
  • Installs easily
  • Works effectively and reliably
  • Increases compressor efficiency
  • Modified polyolefin insulation jacket type
  • 185 deg F intermittent maximum exposure temperature
  • 18 AWG cold lead wire gauge
  • 16 AWG nickel-plated copper bus wire gauge
Item#:
CCH-2C
Manufacturer Item:
CCH-2C
Manufacturer:
NVENT THERMAL LLC
Raychem H611050 Self-Regulating WinterGard Plus Heating Cable, 50 feet, 120 VAC, 6 watt/feet
  • Raychem WinterGard self-regulating heating cables provide convenient, reliable freeze protection for a wide variety of professionally installed residential and commercial water-pipe and roof-and-gutter de-icing applications in nonhazardous areas.
  • Automatically adjust heat output
  • Braided metal shield only
  • 0.38 Inch width x 0.18 Inch thickness cable
Item#:
H611050
Manufacturer Item:
H611050
Manufacturer:
NVENT THERMAL LLC
When compressors operate in cold areas, refrigerant can migrate into the crankcase oil whenever the compressor is not running. On start-up, this can cause excessive motor wear and a loss of refrigeration efficiency. Raychem FreezGard self-regulating crankcase heaters provide reliable peak heating during critical cold periods and unlike conventional constant-wattage heaters, reduce their heating once the compressor starts up or the air temperature rises. Also self-regulating heaters can be safely overlapped and closely spaced without burning out, so one size fits all hermetic compressors up to 5 hp that are 40 Inch or less in circumference.
  • Prolongs motor life
  • Installs easily
  • Works effectively and reliably
  • Increases compressor efficiency
  • Modified polyolefin insulation jacket type
  • 185 deg F intermittent maximum exposure temperature
  • 18 AWG cold lead wire gauge
  • 16 AWG nickel-plated copper bus wire gauge
Item#:
CCH-1C
Manufacturer Item:
CCH-1C
Manufacturer:
NVENT THERMAL LLC
The WinterGard H910 Splice and Tee Kit is for use with WinterGard self-regulating heating cables to make splice, tee, and end seal connections. The kit contains materials for one splice and one end seal, or one tee connection and one end seal. This kit does not provide a power connection; use an H900 or H908 power connection kit for a complete installation.
  • Includes (2) Insulated bus wire crimps, (1) uninsulated braid crimps, (3) cable ties, (6) mastic strips, (1) heat-shrinkable cap, (1) heat-shrinkable tube (6 Inch length, 1 Inch diameter), (2) black cloth tape (6 Inch length), (1) clamp tie, (1) end seal
  • Each kit provides materials for one splice or one tee and one end seal
Item#:
H910
Manufacturer Item:
H910
Manufacturer:
NVENT THERMAL LLC
Pentair H912 Gel-Filled End Seal Kit for H311, H611, H612, H621 and H622
Item#:
H912
Manufacturer Item:
H912
Manufacturer:
NVENT THERMAL LLC
View: