Brand Name
Part Type
Category
|◀ 1 - 12 of 365 ▶|
View:
The ND Damper is constructed using Heavy Duty 0.80 extruded aluminum.
  • Nylon Bearings for quiet operation.
  • Overlapping parallel blade design insures low leakage.
  • Designed to operate at static pressures up to 1.5 w.c.
  • The UL Listed Motor Actuator is a 24 vac 3 wire power open/ power close type.
  • The motor actuator is rated at 18lbs. of torque. Superior to low torque Spring type motors.
  • The Motor Actuator housing has a NEMA1 Rating.
  • Integrated End-Stop Adjustment allows for a percentage of Relief Air (Leakage) to be set when the damper is powered to closed and/or you may set a maximum open position as well.
  • Bright green and red LEDs Indicate damper open and closed position.

    EWC Controls ND-16X10

  • Item#:
    ND-16X10
    Manufacturer Item:
    ND16X10
    Manufacturer:
    EWC CONTROLS INC
    RectorSeal NS-UNI 10PK Novent Universal Refrigerant Cap Silver 1/4" 10 Pack

    NS-UNI 10PK

    Item#:
    NS-UNI 10PK
    Manufacturer Item:
    758500
    Manufacturer:
    RECTORSEAL - HOUSTON
    The ND Damper is constructed using Heavy Duty 0.80 extruded aluminum.
  • Nylon Bearings for quiet operation.
  • Overlapping parallel blade design insures low leakage.
  • Designed to operate at static pressures up to 1.5 w.c.
  • The UL Listed Motor Actuator is a 24 vac 3 wire power open/ power close type.
  • The motor actuator is rated at 18lbs. of torque. Superior to low torque Spring type motors.
  • The Motor Actuator housing has a NEMA1 Rating.
  • Integrated End-Stop Adjustment allows for a percentage of Relief Air (Leakage) to be set when the damper is powered to closed and/or you may set a maximum open position as well.
  • Bright green and red LEDs Indicate damper open and closed position.

    EWC Controls ND-24X10

  • Item#:
    ND-24X10
    Manufacturer Item:
    ND-24X10 24V
    Manufacturer:
    EWC CONTROLS INC
    Make sure you ask for and use genuine Copleand parts. Copeland parts fit right, first time. Insisting on genuine Copeland parts will keep your refrigeration & A/C Compressor running reliably for the long haul

    Copeland Parts N03036438

    Item#:
    N03036438
    Manufacturer Item:
    940-0001-53
    Manufacturer:
    COPELAND LP
    REFRIGERATION CIRCUIT
  • Copeland Scroll compressors on all models
  • Suction line accumulator factory installed
  • Biflow filterdrier included for field installation
  • Integrated solid state control with TimeTemperature Defrost
  • High and Low pressure switches
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant BUILT TO LAST
  • Bakedon powder coat finish over galvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) grille spacing for extra protection

    International Comfort Products NXH618GKP

  • Item#:
    NXH618GKP
    Manufacturer Item:
    NXH618GKP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Make sure you ask for and use genuine Copleand parts. Copeland parts fit right, first time. Insisting on genuine Copeland parts will keep your refrigeration & A/C Compressor running reliably for the long haul

    Copeland Parts N03761265

    Item#:
    N03761265
    Manufacturer Item:
    940-0001-75
    Manufacturer:
    COPELAND LP
    Item#:
    RE84948C175B2505AP
    Manufacturer Item:
    RE84948C175B2505AP
    Manufacturer:
    ADVANCED DISTRIBUTOR PRODUCTS
    Henry Technologies S-5585 Oil Separator 5/8" OD

    Henry Technologies S-5585

    Item#:
    S-5585
    Manufacturer Item:
    S-5585
    Manufacturer:
    HENRY TECHNOLOGIES, INC
    JB Industries SHLD-G4 Locking Refrigerant Cap 1/4" R22 4 PK

    SHLD-G4

    Item#:
    SHLD-G4
    Manufacturer Item:
    SHLD-G4
    Manufacturer:
    JB INDUSTRIES
    The TB6980/TB7980 digital thermostats provide proportional plus integral individual space temperature control in zoned commercial HVAC systems such as hydronic and pressure dependent VAV with or without reheat. There are four different models:
  • Depending on the models, the thermostat can have up to three outputs for the following applications:
  • Floating or Modulating damper/valve actuator control
  • Damper/valve actuator control with duct reheat and auxiliary heat (B models only)
  • Hydronic systems (room control, perimeter heating and cooling) Accessories
  • R841 family of electromechanical relays
  • T7770A3002 remote room sensor
  • 50014156-002 remote room sensor
  • 32004800-001 bare thermistor
  • 50014157-001 duct temperature sensor

    TB6980A1007

  • Item#:
    TB6980A1007
    Manufacturer Item:
    TB6980A1007
    Manufacturer:
    HONEYWELL
    All products are designed and manufactured for use within forced air systems, providing effective distribution of conditioned air from the air handler to every room of a residence.Metal duct and fittings are constructed from hot-dipped Galvanized steel. All metal products are made true to gauge. Sheet metal duct, pipe, and fittings are designed with industry and regional standards in mind, as well as ACCA and SMACNA recommendations and requirements. Products are hand-crafted to reduce noise and friction and constructed to maximize efficiency by increasing airflow without leaks. The quality of our Galvanized steel allows us to create fittings that are rust-resistant and durable

    Southwark 1135

    Item#:
    1135
    Manufacturer Item:
    1135
    Manufacturer:
    SMOKE PIPE & SHEET METAL
    Aprilaire 1310AA Air Cleaner MERV 11 20" X 20" X 5"

    Aprilaire 1310AA

    Item#:
    1310AA
    Manufacturer Item:
    1310
    Manufacturer:
    APRILAIRE
    |◀ 1 - 12 of 365 ▶|
    View: