Honeywell TH3210D1004

Honeywell UV100E1043

Honeywell 203372

• Fast Response Models (For Duct Mounting) Have Coiled Sensing Element Giving At Least Four
• Times Faster Response Than Standard Models
• Ambient Temperature Compensated For The Case And Tubing
• Sensing Element Capillary Tubing Allows Remote Mounting Of Sensing Element
• Set Point May Be Read And Adjusted Through Cover
• Throttling Dial Inside Case Adjusts Proportional Throttling Range, Throttling Dial Inside Case
• Adjusts Proportional Throttling Range
  
  

  Honeywell T991A1061

On-off low Voltage valves consist of an actuator and valve assembly for controlling the flow of hot water
• Manual opener for valve operation on power failure, valve returns to automatic position when power is restored
• All models may be installed without disassembling the valve
• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
• 15 sec open time
• 18" lead electric connection
• Spring return to close valve action
• 50 VA pilot duty at 24 VAC , 4.4 amp running with 26.4 amp inrush at 120 VAC end switch rating
• NO SPST auxillary end switch
• Buna-N (NBR) rubber ball plug/ball/disc material
• EPDM rubber packing material
• Mounted in any position on a vertical line
  
  

  HONEYWELL B163

Honeywell CHWE41013

The remote indoor temperature sensor is used to sense temperature remotely
• Used to sense temperature if the thermostat is installed in a poor temperature sensing location
• Small remote temperature sensor to match any room decor
• Easy to install and use
• Factory calibrated, no field calibration required
• Mounts directly on the wall using mounting screws and anchors provided
• Maximum distance between thermostat and sensor is 200 feet
  
  

  Honeywell C7189U1005

Remote outdoor temperature sensor when installed the current outdoor temperature is displayed
• Also can be used to manage dual fuel and lock-out expensive auxiliary heat in heat pump applications
• Mounting clip allows easy sensor positioning on siding or soffit
• Factory calibrated, no field calibration required
• Maximum wire run of 200 feet
• Mounting clip provided and screws provided
  
  

  Honeywell C7089U1006

Honeywell C7150B1004

Light and medium duty line Voltage thermostats control line Voltage valves, motors, contractors, electric heat, elements, duct furnaces and fan coil units in heating/cooling systems
• Automatic cooling and heating anticipation
• Receptacles, small, containing gas, 2.1 hazmat information
• Super tradeline value
  
  

  Honeywell C201-10

Powered by RedLINK reliability
• No interference with other wireless devices in the home
• Reliable performance in all climates
• Installs in minutes
• Up to 5 years battery life
• 2 months low battery warning
• Battery warning displayed on RedLINK enabled thermostats
• Used with RedLINK enabled thermostats and accessories
• Vertical mounting with supplied bracket and mounting hardware
• Thermistor sensor element
• - 1% RH condensing
  
  

  HONEYWELL C7089R1013

Completes circuit to household lamp on temperature fall, indicating inoperative heating equipment
• Plugs directly into wall outlet
• Lamp plugs into receptacle at bottom of winter watchman device
• Useful when house is unoccupied to notify a neighbour of a temperature drop so heating source fault can be rectified before freeze-up occurs
• Not precision calibrated for use as a thermostat
  
  

  Honeywell C138-1