S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
International Comfort Products N92MSN0401412A
Item#:
N92MSN0802120A
Manufacturer Item:
N92MSN0802120A
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Unique Manufactured Housing Design with a
robust, 19 7/8"W, fully-insulated cabinet to fit the
standard MH footprint. The MG2R is our flagship
high-efficiency, HUD-compliant, gas furnace.
AC-Ready 4-Ton ECM Blower with 5-speed taps,
with/without a factory-installed 20"H coil box;
allowing for a field-installed 20"/26"H coil box to
suit your capacity and access needs. Refer to Split
System sell sheets for AHRI-rated coil-fit matches.
Quick LP Conversion with an easy-access gas valve
regulator and manifold, using the factory-provided
LP orifices included in the unit-literature kit.
Category IV Venting Approval allows for vertical
or horizontal direct venting using an approved
non-metallic two-pipe system, or a concentric
termination kit for application flexibility.
Dependable Warranty and Support, handled
directly by Style Crests dedicated HVAC Team,
offering the most competitive warranty coverage
and service in the Manufactured Housing Industry.
Nortek Global (Intertherm) MG2R045F1AAM2
Item#:
MG2R060F1ABM2
Manufacturer Item:
1036488
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Fujitsu FF85215LM98U Gas Furnace 85K BTU 98% AFUE Constant Torque Motor Upflow 21"
Fujitsu FF80ST510021UHSNAAS
Item#:
FF85215LM98U
Manufacturer Item:
FF85215LM98U
Manufacturer:
FUJITSU(MINI-SPLITS)
The Thermo Pride story - located right here in the United States, Thermo Products, makers of Thermo Pride heating and cooling equipment, is known for superior workmanship and product innovation. Thermo Products is committed to producing handcrafted products that provide your family with reliability, comfort, durability, quiet operation and high efficiency. You will have the peace-of-mind that comes from knowing your gas Thermo Pride mobile home furnace is anything but a mass-produced, low-cost compromise between quality and price. Reliability - whether you are upgrading to save energy or your current furnace has failed, you will want to replace it with one that is both dependable and economical. Thermo Pride mobile home furnaces are designed and built specifically as replacement furnaces, so you can easily upgrade the heating or cooling system in your home.
- Integrated coil cabinet for easy air conditioning installation
- Aluminized steel primary heat exchanger
- Stainless steel secondary heat exchanger
- Silicon nitride igniter for quiet and consistent light-off
- 2-piece top design for easy access to vent pipes
- Concentric vent kit available using existing roof jack and standard base
- PVC venting
- Lifetime heat exchanger warranty and 10 years parts warranty
Thermo Pride CLQS1-075T42N
Fujitsu FF75174TS80M Gas Furnace 75K BTU 80% AFUE Constant Torque Motor Upflow/Horizontal 17",
,
,
Flanders Precisionaire 80055.021620
Item#:
FF75174TS80M
Manufacturer Item:
FF75174TS80M
Manufacturer:
FUJITSU(MINI-SPLITS)
International Comfort Products R80MSU0802120A
Item#:
R92ESN0801716A
Manufacturer Item:
R92ESN0801716A
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
G97CMN0801714A-OD1
Item#:
G97CMN0801714A-OD1
Manufacturer Item:
G97CMN0801714-OD1
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Quiet performance
Variable 25-speed constant torque blower motor and single-stage gas valve also provide enhanced levels of temperature control and comfort
Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
Fully insulated cabinet helps keep the heat moving to your ductwork
Air purifier and humidifier compatible
10-Year Parts Limited Warranty upon timely registration
20-Year Heat Exchanger Limited Warranty
International Comfort Products N80VSL0701716B
Item#:
N80VSL0902120A
Manufacturer Item:
N80VSL0902120A
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
- Supports 2-stage cooling units
- Flame roll-out sensors standard
- Dehumidification feature in cooling
- 24 VAC humidifier terminal and electronic air cleaner terminal
- Tougher - variable speed blower motor, adjustable heating blower off delay, factory set blower on delay, RPJ aluminized steel heat exchanger, high temperature limit control prevents overheating, direct ignition with silicon nitride igniter, 1-piece preprinted steel cabinet
- Quieter - 2-stage heating operation, 2-stage induced draft blower, in-shot burners, insulated blower compartment
- Innovative knobs for easy door removal and secure attachment
- Through the casing flue pipe for counterflow or horizontal applications with accessory
- 4-position - upflow/downflow/horizontal installation
- 3-position vent elbow capability
- Slide out blower assembly
- 10 years no hassle replacement, 5 years parts and 20 years heat exchanger limited warranty
- Solid state time operation heating blower control
- 4.5 - 13.6" WC inlet gas pressure
- Low NOx
International Comfort Products END4X61L24
Item#:
G8MVL0701716
Manufacturer Item:
G8MVL0701716B
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
APPLICATION VERSATILITY
Designed for the manufactured home market with flexibility in mind. Onepiece air handler with the ability to be factory built as upflow (solid door) or
downflow (louvered door) air handler. Can also be field configured to opposite
configuration with no additional parts or kits. 2 5 tons of cooling or heating
airflow with a range of electric heat kits.
MOTOR
Constant torque ECM speeds and torques are controlled by software embedded in the motor to maintain constant torque. Motors are pre-programmed at the factory. Direct drive blowers circulate air quietly and efficiently. Motor speeds and torques programmed in the motor. Blowers mounted on rails so they can be easily removed for service. CABINET
Sturdy, galvanized steel cabinet with painted front panels. Cabinet fully insulated with 1/2 micro mat non-hygroscopic insulation to prevent sweating and mold growth, to encapsulate glass fibers, and to provide excellent R-value. Stick pins ensure insulation remains in place. MODULAR ELECTRIC HEAT KITS
Heat kits available with either circuit breakers or terminal blocks. Available from 3 to 20 KW. Models with electric heat include sequencers and temperature limit switches for safe, efficient operation. Modules are easily installed in the field using molex plugs or can be ordered factory-installed. Controls are accessible from the front for easy service. Disconnect does not protrude through the wall panel. ELECTRONIC CIRCUIT BOARD
Electronic circuit board provides 30 secs ON/OFF blower time delay extracting more heat/cool from the coil. Automotive pull-style fuse integrated into board. WARRANTY
Hassle-free five-year limited parts warranty
Constant torque ECM speeds and torques are controlled by software embedded in the motor to maintain constant torque. Motors are pre-programmed at the factory. Direct drive blowers circulate air quietly and efficiently. Motor speeds and torques programmed in the motor. Blowers mounted on rails so they can be easily removed for service.
Sturdy, galvanized steel cabinet with painted front panels. Cabinet fully insulated with 1/2 micro mat non-hygroscopic insulation to prevent sweating and mold growth, to encapsulate glass fibers, and to provide excellent R-value. Stick pins ensure insulation remains in place.
Heat kits available with either circuit breakers or terminal blocks. Available from 3 to 20 KW. Models with electric heat include sequencers and temperature limit switches for safe, efficient operation. Modules are easily installed in the field using molex plugs or can be ordered factory-installed. Controls are accessible from the front for easy service. Disconnect does not protrude through the wall panel.
Electronic circuit board provides 30 secs ON/OFF blower time delay extracting more heat/cool from the coil. Automotive pull-style fuse integrated into board.
Hassle-free five-year limited parts warranty
Williamson -Thermoflo PMP210DDXWS2
Item#:
AED-002+FCL10
Manufacturer Item:
AED-002+FCL10
Manufacturer:
ASPEN MFG. LLC
Fujitsu FF115245PT96M Gas Furnace 112K BTU 96% AFUE UP-FLOW Not Horiz 2-Stage
- Up to 96% residential gas furnace CSA certified
- 4 way multi-poise design
- Two stages of operation to save energy and maintain optimal comfort level.
- Diagnostics 7-Segment LED all units
- Ignition System DSI for reliability and longevity
- Water Management System with patented Blocked Drain Sensor
- Heat exchanger is removable for improved serviceability.
- Aluminized steel primary and stainless steel secondary construction provide maximum corrosion resistance and thermal fatigue reliability.
- Low profile 34 inch cabinet ideal for space constrained installations.
- Blower Shelf design serviceable in all furnace orientations
- Pre marked hoses insures proper system drainage
- Vent with 2" or 3" PVC
- Replaceable Collector box
- Hemmed edges on cabinet and doors
- Quarter turn fasteners for tool less access
- Integrated control boards feature dip switches for easy system set up
- Self priming condensate trap
- Solid bottom included
- Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193,
,
Fujitsu FF115245LT96M
Item#:
FF115245PT96M
Manufacturer Item:
FF115245PT96M
Manufacturer:
FUJITSU(UNITARY)
Field Controls CK-41P Control Kit 46458041 24 VAC for Furnaces Boilers Water Heaters,
,
,