Suntec J4 Fuel Oil Pump, 1/4 Inch NPTF x 1/8 Inch NPTF, 26 gph, 1725 rpm

• Single pipe gravity feed installations
• Two pipe lift installations to 12 Inch Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Capacities to 60 gph
• Six pressure options, 10 to 300 psi
• For no. 4 and lighter fuel oils (gasoline and JP fuels, special)
• Hub and flange mounting in any position
• 1/4 Inch NPTF 2 inlets and return port
• Left nozzle location

,
,

Suntec P1-5

Suntec A2YA-7916 1-Stage Oil Pump, 7 gph Strainer and 7 gph at 100 psi, 3 gph at 200 psi Rated Nozzle, 3450 RPM, 10 psi Inlet and Return

• Right hand nozzle port location
• Has a unique circuit that exhibits a dependable cut-off, a high 1-pipe lift capacity and automatic 2-pipe purging
• The pump circuit contains a positive displacement involute gear set and two controlling valves
• Fuel oil #2 and lighter, not compatible for use with blends higher than 5% biodiesel
• 1-pipe system (2-pipe system possible)
• Diaphragm cut-off
• Pressure regulation valve function
• 5/16" diameter shaft

Sid Harvey Item #:P4-101: Replaces Part #:'s : P4-101R,
,

Suntec P4-101

Capital City 22R623D5AA14 Webster Fuel Oil Pump 56 GPH 3450 RPM,
,

Capital City Tool 22R623D5AA14

Each tank needs to be installed with an oil gauge. The gauge base is treaded 2" NPT with a rubber"O-Ring" for sealing. It needs to be mounted on 1 of the plastic adapters provided with the tank with no need for pipe dope or Teflon tape on the threads. Must be hand tightened only. String and float must be released slowly during installation to prevent damage to the gearing or loosening the line off the reel. Housing design and color may differ depending on tank model.,
,

Roth 2335000191

Mitco 264-48 Replacement MFDlow Oil Filter Element for 1A-25A Oil Filter

• State-of-art oil filter cartridges designed for a full range of nozzleGallonages
• Computer design gives largest surface area and most flutes for increased filtering
• Greatest volume - more filter material than comparable filter elements
• Change filters less frequently due to increased holding capacity
• Non-shed design is fiber welded, does not contain bonding agents that may cause nozzle to clog
• Y-fiber composition for increased depth filtration
• Individually packed in bags for added protection

Mitco Item #:264-48: Replaces Part #:'s : 264-1A,
,

Mitco 264-48

Mitco 264F BIO Oil Filter Complete Felt Bio Small,
,

Mitco 264F BIO

Sid Harvey B2YA-8916B Oil Pump 2-Stage

Suntec B2YA-8916B

Hydrolevel 47-50231 Universal Oil Furnace Timer

Hydrolevel 47-50231

Make sure you ask for and use genuine Copleand parts. Copeland parts fit right, first time. Insisting on genuine Copeland parts will keep your refrigeration & A/C Compressor running reliably for the long haul

Copeland Parts 998E02200

Suntec A-7000 Fuel Oil Pump, 1/4" NPTF x 1/8" NPTF, 2.5 gph, 1725 RPM

• Single pipe installations to 6" Hg vacuum
• Two pipe installations to 12" Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Suitable for no. 2, no. 1 fuel oil, or kerosene
• Mounting in any position
• Factory set at 100 psi
• Adjustable range 100 - 150 psi at 3450 RPM, 100 - 135 psi at 1725 RPM, models available to 200 and 300 psi
• 30 x 30 mesh waste oil
• Right nozzle location

,
,

Suntec A1RA-7738

Suntec B2VA-8241 2-Stage High Pressure Oil Booster Pump, 20 gph at 10 - 20 psi, 3450 RPM

• Two-pipe installations up to 17" Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Adjustable manual or automatic high/low firing
• For no. 2 fuel oil
• Two-bolt flange mounting in any position except upside down
• Right hand nozzle port location

,
,

Suntec B2VA-8241

Suntec B-8200 High Capacity High Pressure Fuel Oil Pump, 1/4" NPTF x 1/8" NPTF, 8 gph, 3450 RPM

• Two pipe installations up to 17" Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Adjustable manual or automatic high/low firing
• High efficiency burner applications
• Pressure adjustable (100 to 200 psi low fire, 200-300 psi high fire)
• For no. 2 fuel oil. for other fuels, consult factory
• Two bolt flange mounting in any position except upside down
• Right nozzle location

,
,

Suntec B2TA-8248