Thermo Manufacturing Thermopan 16048 Aluminum Fiberglass Standard Fire-Resistant Return Air Panning, 16 x 47-1/2 Inch

Goodman Heating Parts 20197310 Vent Pressure Switch

Armstrong Air Heating Parts 21W66 Inducer Gasket 69M33,69M32

The SharkBite tee stop combines a SharkBite push-to-connect tee with a 1/4" compression line and a quarter turn valve for easy on/off control of the supply line. This product is particularly useful for adding supply lines to fixtures such as dishwashers, humidifiers and ice makers. The tee stop also commonly serves as an alternative to a saddle valve. It can be used on copper, PEX, CPVC or PE-RT tubing. The valve is easily rotated after assembly for easy installation, even in tight spaces.

Allow the user to tap into existing supply lines to add fixtures and appliances with the speed and convenience of push-fit connections to the final phase of plumbing projects
• Instant push-fit connection for increased ease-of use: No soldering, clamps, unions, or glue required
• Fittings certified to 200 psi and 200 deg F Maximum: Proven durability and quality
• Fits copper tubing, CTS CPVC, PEX and PE-RT pipe: Connects all 4-types in any combination
• Integral tube liner for PEX installations: Means no loose components and ensures a secure, reliable connection
• Stainless steel grab ring
• Veradel tube support liner
  

The SharkBite tee stop combines a SharkBite push-to-connect tee with a 1/4" compression line and a quarter turn valve for easy on/off control of the supply line. This product is particularly useful for adding supply lines to fixtures such as dishwashers, humidifiers and ice makers. The tee stop also commonly serves as an alternative to a saddle valve. It can be used on copper, PEX, CPVC or PE-RT tubing. The valve is easily rotated after assembly for easy installation, even in tight spaces.

Allow the user to tap into existing supply lines to add fixtures and appliances with the speed and convenience of push-fit connections to the final phase of plumbing projects
• Instant push-fit connection for increased ease-of use: No soldering, clamps, unions, or glue required
• Fittings certified to 200 psi and 200 deg F Maximum: Proven durability and quality
• Fits copper tubing, CTS CPVC, PEX and PE-RT pipe: Connects all 4-types in any combination
• Integral tube liner for PEX installations: Means no loose components and ensures a secure, reliable connection
• Stainless steel grab ring
• Veradel tube support liner
  

Taco boiler feed valves automatically feed water to a system whenever pressure in the system drops below the pressure setting of the valve. The dual control models combine the boiler feed with an in-line pressure relief valve. The built-in check prevents emptying the system if incoming pressure falls. They feature fast fill rates and an exclusive, lockable fast fill lever. Each valve is adjustable from10 to 25 psi, has a built-in check to prevent the emptying of the system if incoming pressure fails, and the easy to use fast fill lever is lockable.

Fast fill rate
• Exclusive fast fill lever lock
• Built-in check to prevent emptying the system if incoming pressure fails
• Pressure setting adjustment separated from fast fill lever for easy, fast adjustment
• 100 psi maximum supply side pressure, 30 psi relief valve setting, 12 psi factory setting
  
  

  335-3

Hydrolevel Parts 3150 Combination Aquastat and Low Water Cutoff

Hydrolevel 3150

Wilo USA 4090765 3-Speed Circulator Pump, 1/12 HP, 115 VAC , 19 gpm

Suitable for any installation position with horizontal shaft, terminal box in 3-6-9-12 o'clock position
• Impedance protected motor, motor protection not required
• Cable entry both sides of terminal box
• Quick connection spring clips for simple electrical connection
• Steel terminal box
• Powerful starting torque
• Ultra quiet design
• Reliable wet rotor technology
• Optional check flange set
• Automatically vented
• 3-pre-selectable speed stages for load adjustment
• Stainless steel shaft
  

Wilo USA 4171560 3-Speed Circulator Pump, 1/20 HP, 115 VAC , 2700 RPM , 19 gpm

Rotating flange and installable check valve included
• Three speed cast iron model
• Stainless steel shaft
• Quick connection wiring
• Steel terminal box
• Powerful starting torque
• Reliable wet rotor technology
• Spin-balanced rotor for silent operation
• Automatically vented
  

Nu-Calgon 4175-10 Ecopure R290 Charging Assembly Meets AHRI 700 Standard

Nu-Calgon 4371-32 Thermo-Trap Gel's unique formula provides a protective barrier from open flames and heat that are present during soldering and brazing. The gel works as a shield that protects the surface from melting or burning. When finished, the remaining gel is easily wiped up and leaves no residue or stain. The gel is not a heat sink, but a protective barrier. Product may need to be added more than once if subjected to open flames for a longer duration. Drywall, wood joists or other areas are not damaged from the open flames.

Protects drywall, wiring, joists and other surrounding areas that a flame could also come in contact with
• Adheres to all clean surfaces
• Viscous formula will not run or melt
• Harmless to skin and clothing
• Will not stain work surfaces
• Cleans up easily
• Odorless and biodegradable
• Forms a protective barrier to keep flames or heat from damaging areas beyond direct work surface
  

Taco air scoop's special design and internal baffles of Taco air scoops slow water velocity to separate the air from solution. Thanks to this design, Taco air scoops efficiently remove air to provide noiseless, air-free hydronic heating, cooling or combination systems. They also provide an economic way to integrate air elimination by the connection of either a plain steel or diaphragm expansion tank.

1-piece cast iron construction
• Never requires any servicing
• Engineered baffle separates air from water
• Each air scoop has a vent connection on top for the installation of a 1/8" Taco 400-3 or 416-1 Hy-Vent and 1/2" bottom tapping for a diaphragm expansion tank
• The 1-1/2 - 4" air scoops also have an additional top tapping for the connection of a plain steel expansion tank
• Water or water/glycol media
  
  

  434-5