Mitco 265-12A BIO Large Replacement Micro-Flow Oil Filter Element

• State-of-art oil filter cartridges designed for a full range of nozzle gallonages
• Computer design gives largest surface area and most flutes for increased filtering
• Greatest volume - more filter material than comparable filter elements
• Change filters less frequently due to increased holding capacity
• Non-shed design is fiber welded, does not contain bonding agents that may cause nozzle to clog
• Y-fiber composition for increased depth filtration
• Elements individually bagged
• Bio compatible filter

,
,

265-12A BIO

265-12A BIO

Viessmann Parts 7834262 Oil Pump

Viessmann Heating Parts 7834262

Beckett Parts F99-10 Short Spin On Oil Filter 10 Mircon,
,

Beckett Parts Parts F99-10

Beckett Parts F99-10

Webster oil safety valves are ideal for use in oil supply systems which have from 0 to 60 psi supply line pressures on the inlet side of the valve. Requires a sustained VAC uum on the outlet side of the valve for fuel to flow to the burner pump. The OSV series provides automatic shut-off for the oil supply in case the line between the device and the burner is broken. Many state and local codes require such a device and also limits inlet pressure on burner pumps to a maximum of 3 psi. Available in 3/8 and 1/2 NPTF porting.

• Provide important protection in oil burner supply systems with pressurized supply lines
• By isolating burner fuel pumps from supply line pressure sources a supply pump or overhead tank, the osv relieves ores sure strain on fuel pump inlets and seals and prevents tank siphoning and spilling caused by accidental line breaks
• OSV is mounted close to burner assembly
• OSV operates as pressure reducer with supply line pressure on the valve inlet side and fuel pump VAC uum on the valve outlet side
• 1/2 - 14 NPTF port size

Sid Harvey Item #:P131-40: Replaces Part #:'s : 2P397,
,

Webster Fuel Pumps P131-40

Webster Fuel Pumps P131-40

Mitco 287-2 Purolator PF2002 MFDlow Oil Filter with Gasket,
,

mitco 287-2

mitco 287-2

Mitco 264-1A Small Felt Oil Filter Element Fits General 1A

Mitco Item #:264-1A: Replaces Part #:'s : 264-48,
,

General Filters 2003 Oil Filter Wool Felt 1A-330BG

2003

2003

Westwood A030 Metal Oil Filter Refill for General 2A-300 Filter

• With (2) gaskets

Sid Harvey Item #:A030: Replaces Part #:'s : 2M014,

westwood products a030

westwood products a030

Suntec B-8200 High Capacity High Pressure Fuel Oil Pump, 1/4" NPTF x 1/8" NPTF, 16 gph, 3450 RPM

• Two pipe installations up to 17" Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Adjustable manual or automatic high/low firing
• High efficiency burner applications
• Pressure adjustable (100 to 200 psi low fire, 200-300 psi high fire)
• For no. 2 fuel oil. for other fuels, consult factory
• Two bolt flange mounting in any position except upside down
• Right nozzle location

,
,

B2TA-8245

B2TA-8245

Suntec B-8800 Two Step Fuel Oil Pump, 1/4" NPTF x 1/8" NPTF, 23 gph, 3450 RPM

• Two pipe installations up to 17" Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Adjustable manual or automatic high/low firing
• High efficiency burner applications
• Pressure adjustable (100 to 200 psi low fire, 200-300 psi high fire)
• For no. 2 fuel oil. for other fuels, consult factory
• Two bolt flange mounting in any position except upside down
• Right nozzle location

,
,

suntec b2ta-8852

suntec b2ta-8852

Suntec J4 Fuel Oil Pump, 1/4 Inch NPTF x 1/8 Inch NPTF, 26 gph, 1725 rpm

• Single pipe gravity feed installations
• Two pipe lift installations to 12 Inch Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Capacities to 60 gph
• Six pressure options, 10 to 300 psi
• For no. 4 and lighter fuel oils (gasoline and JP fuels, special)
• Hub and flange mounting in any position
• 1/4 Inch NPTF 2 inlets and return port
• Left nozzle location

,
,

suntec p1-5

suntec p1-5

Suntec A2YA-7916 1-Stage Oil Pump, 7 gph Strainer and 7 gph at 100 psi, 3 gph at 200 psi Rated Nozzle, 3450 RPM, 10 psi Inlet and Return

• Right hand nozzle port location
• Has a unique circuit that exhibits a dependable cut-off, a high 1-pipe lift capacity and automatic 2-pipe purging
• The pump circuit contains a positive displacement involute gear set and two controlling valves
• Fuel oil #2 and lighter, not compatible for use with blends higher than 5% biodiesel
• 1-pipe system (2-pipe system possible)
• Diaphragm cut-off
• Pressure regulation valve function
• 5/16" diameter shaft

Sid Harvey Item #:P4-101: Replaces Part #:'s : P4-101R,
,

suntec p4-101

suntec p4-101